BladeLAB

Пікірлер

@helgevig5134 7 күн бұрын

My size 39 seba cj2 prime's fit really snug and are now ultra comfy. But the insoles in them were strangely tiny (short), and the skates didn't feel good on me with them. I put in some simple 'rubbery' insoles from a pair of adidas Puig skate shoes, and got a perfect fit 👌

@BoxaBole Ай бұрын

Hey I always wanted to get freestyle frames, I found just one right now on the web, why I can't find them anywhere ? All to of stock >.< Thanks

@otarkaeones1135 Ай бұрын

Which of the two gives you more control and better support for your heel?

@bladeshred01 Ай бұрын

why not use the stock exterior shock absorbers the liners come with?

@bladelab Ай бұрын

I would never use those in a skate, they are too soft, maybe for someone who is much lighter than me, it could work

@bladeshred01 Ай бұрын

@@bladelab that's understandable,a lot of people switch out that one for the harder standard FR harder plastic shock absorber (old seba/fr pads)....just never seen it on the inside cuz usually people buy intuition so close to their foot size there's barely space for an insole. Glad you made em work for you🤙

@LorenaGraves-j7b 2 ай бұрын

Jones Linda Young Melissa Jackson Gary

@LouisConolyE 2 ай бұрын

Martin Helen Thompson Christopher Davis Scott

@TurnerEarl-e3i 2 ай бұрын

Young William Jackson Karen Taylor Mark

@Cheffington 4 ай бұрын

I see your point, however after wearing xsjado skates its hard to go back to solid boot skates IMO. I recently tried to skate my USD Sways and it felt nasty. There is some benefit to the functionality of xsjado especially with regards to the forward flex of other skates.

@kristofdelint-wouters1980 4 ай бұрын

Please put on some lights dude!👎

@chinobean3555 4 ай бұрын

i love my primes. you gotta heat mold them brother

@bladelab 4 ай бұрын

If I don't like a liner without heatmolding I won't like it after. plus I lose chance to return it and decreases resale value. Heatmolding liners do work, I just rarely do it. The foam of this liner felt thick and harder than usual and I am not sure if any heat molding could change that.

@kamilkucharski3267 5 ай бұрын

Amazing tricks, spots, ideas, skates, clothes and of course you :*

@bladelab 5 ай бұрын

Thanks Kamil , this is probably the last edit for a while now.

@rockmanfan5104 5 ай бұрын

Im saving up for a pair man. One day... hopefully before summer is over

@NoBuddyz 6 ай бұрын

I can only feel the CJ Seba in the toe a lot more BUT the shape of the UFR is different than the CJ. Added DEAD heel pad in both. Also no insole need in Intuition

@chiefoftimes387 7 ай бұрын

You should try 3D printing frames. I would like to see ur progress.

@bladelab 7 ай бұрын

I have lot of frames printed, btw if you scrub through the first upload on this channel, I think I go through most of them, but its mostly silly and weird stuff

@chiefoftimes387 7 ай бұрын

Don't worry dude. You are doing great no matter what they say. That a part of having ur own buisness. 👆💪

@grinpiece3432 8 ай бұрын

Depends a lot on one's age I guess but personally I almost always wear padded short, knee/shin guards and mittens for agressive, sometimes one elbow guard or wrist guard when sore, sometimes an helmet for bowl. You only got one body, the better you protect it, the longer you can keep shredding !

@royman0 8 ай бұрын

You say the toe box width/height is more roomy on the iqon, but what about the width/volume around the ankle/heel?

@bladelab 8 ай бұрын

I personally didn't notice a difference in the ankle and heel area other than the shape of the carbon shell, I didn't take apart an iqon boot to see it, but the carbon cups around your heel a more noticeably with the iqons, I noticed that cup edge was hurting my heel on left foot for some reason, didn't heat it, but they should came symmetric tbh (right one was totally fine)

@royman0 8 ай бұрын

@@bladelab thanks!! that better heel cup sounds nice...I have a really narrow foot so its hard to find boots that give me a good heel lock.

@bladelab 8 ай бұрын

@@royman0I was never happy with any skate's heel lock, I even modded the carbons to lock better but this is one is way better, full disclosure: it's my niche handmade skate that I am developing: kzbin.info/www/bejne/jZDaf2Z8m6aLlaMsi=CIrtoDttHLpIolrw

@doctorgonzo7777 8 ай бұрын

this is like ASMR to me, your voice and the quiet background is very relaxing

@bladelab 8 ай бұрын

haha thanks I had serious problems with hearing my own voice on recording since my early childhood, but practicing with blade tech type videos really helped me to get over it and I still have so much to improve upon

@christopherlees3684 9 ай бұрын

Looking for new liners. I have the Ridder liners and noticed the sizing is different to the Them liners and Premium (5mm staggered in sizing). Is this noticeable as i could really do with the extra 5mm. Thanks

@bladelab 9 ай бұрын

I can't give you more advice than my own experience, but I can comfortably skate 300mm FR or Premium in narrow 295 carbon shells. The thems are much puffier and I currently don't even have a skate to put them into. I like the FRs the most, it's thinner than thems, but thicker than skate/premium.

@kevarank 9 ай бұрын

Great skating man! And awesome music 🖤 now I check all of your Videos out! 🎉 thats the best thing about blading it has no rules and no one style is right! You motivated me now to try New Moves💫🔥

@bladelab 9 ай бұрын

Thanks Kevin, much appreciated ! People want to make rules for it and I have very small reach and influence but it makes me feel the other part of my mission is complete when I manage to either get someone to skate again or give them lightbulb moments to try out similar ideas. The problem is we won't get younger anytime soon to skate big and risky stuff again, but I think there isn't a limit on doing small but new, novel, out of the box ideas on smaller obstacles .

@scottcurtis3424 9 ай бұрын

Theres a guy called tom moyse who would put you in the wet packet hamm category 🤔

@bladelab 9 ай бұрын

I have no idea what that means but it doesn't sound good, I don't watch that guy because I don't like his content, if someone doesn't like mine, they don't have to watch it either, it's that simple

@MidLifeBlader 9 ай бұрын

Where did you get your hands on a pair of suspension frames ? Can I buy them off of you? I am building a classic skate from my childhood and I need a pair of these frames . Let me know @bladelab !

@bladelab 9 ай бұрын

I found them a couple years ago in my local store, it was just sitting there as dead stock and it was really cheap. I just sold one that came off the Legacy skates, I would rather keep this last one just as a reminder. They are hard to find, but not impossible, just keep searching in blade trade groups from time to time, or just check them daily and snatch the first one that is available. I have so much super rare gear, got most of from blade trade groups.

@MidLifeBlader 9 ай бұрын

@@bladelab I am not on Facebook so I’m not in any groups . I’ll give you whatever you want for them . I really really want a pair badly . Let me know !

@bladelab 9 ай бұрын

@@MidLifeBlader can I email you or how could we talk ?

@luedinski 10 ай бұрын

I really like the Rollerblade insole, comparable to Myfit or the green Superfeet.

@captainhowdy-gb8rz 10 ай бұрын

Latimers fixed the slip problem

@bladelab 10 ай бұрын

to me , not really, even if i pull the velcro strap on fully tight, the shoe could be locked into the heel but my foot could still slip inside the shoe

@vanessamassucci3795 10 ай бұрын

E aí Carlão blz mano! Tá andando d mais cara

@user-uu1ru5de4g 10 ай бұрын

They look sick .

@baskets8429 10 ай бұрын

nice stuff

@bladelab 10 ай бұрын

thank you sir, I still have no idea how you got those DL's so early

@tjl3979 10 ай бұрын

I like the idea of a xsjado with a thinner symetrics style soul plate.

@tiagob.garcia6004 10 ай бұрын

How about the size fit? I want to buy this skate but Im worried about the fit. Im 278 mondo using 9.5 intuition and 10US vans. The size 10 is 275 mondo and the 10.5 is 282

@bladelab 10 ай бұрын

I can't really give a sound advice on that, these new DL footwraps do fit a bit wide and voluminous, which is good for me because I have wide feed and I wear two pairs of socks for everything.

@Red3f1ned 10 ай бұрын

Good stuff, man. Keep at it. I enjoyed the hurricanes and cess slides. You utilized the box well. Awesome getup btw. Like a post apocalyptic ninja that found skates.

@bladelab 10 ай бұрын

Thanks so much, you are one of the few who understands this character / persona I am doing with the rollerblading thing, not even sure if it's me or a character. Thanks again for the motivation in these demotivational winter months.

@Red3f1ned 10 ай бұрын

@@bladelab Yw. Glad to give some love. Oh, and not to preach at ya, but felt I needed to say this. You're the character and the character is you. It's an aspect of yourself. Embrace it but don't over identity with it either. All about that balance. Speaking from experience, lol.

@DJSKETCHYPETE 11 ай бұрын

Bonded carbon?

@bladelab 11 ай бұрын

ummm, no, I didn't use any carbon for these skates

@BIGBUD71 11 ай бұрын

3mins ill never get back....WTF Did i just watch 🙄

@bladelab 11 ай бұрын

you could close it at 15 seconds if you don't like it

@johnnyfiveneedsinput 11 ай бұрын

Gnarly

@bladelab 11 ай бұрын

0:00 mak (kick on box) to bs royale to heel kick to true mak 0:06 mak (kick on box) to bs royale to heel kick to true mak (2nd version) 0:12 top*rn* to 360 cess unity to p* 0:20 top*rn* to 360 cess unity to front torque 0:28 AO grindspin to AO x-wing reverse direction rewing toe kick (on box) out 0:33 AO grindspin to AO x-wing reverse direction rewing toe kick (on box) out 0:38 AO grindspin to AO x-wing 180 grind spin out (it was meant to be more like an AO mak slide off 180out) 0:44 cess slide backslide to AO negative fish to 180 cess backslide then 180 cess unity 0:51 cess slide backslide to AO negative fish to 180 cess backslide toe kick back (on box) then 180 cess unity 0:57 topacid to cess torque 360 back up to rough p* 1:04 topacid to cess torque 360 back up to rough p* (2nd angle) 1:11 fish on top bar touching soul foot on lower bar to soul to 180 grindspin to 180 "roll swipe" to mak dink (it didn't roll well, but this combo broke me a bit mentally, this was the best I landed) 1:22 dance practice 1:26 bs royale to ... I have no clue how to call this, front back dismount or compression dip, no idea back to bs royale 1:39 Fishbrain (grabbed) to negative farshide(?) grabbed fish to grabbed fishbrain to negative grabbed farside fish to grabbed fishbrain (this combo was meant to be just a meme about people telling others to grab their one footed grinds) 1:44 rail end mak step to top p* to 360 grindspin out in reverse direction 1:49 makio to grind box side toe kick to compression dip to makio 1:57 makio to grind box side toe kick to compression dip to makio (different land without slo mo) 2:03 topsoul with front foot in cess slide position 2:07 topsoul with front foot in cess slide position to farside topsoul 2:13 fish to toe kick to true fish 2:19 fish to toe kick to true fish to fronside backslide 2:26 cross or split fish (fish on close, negative fish on far side) to bs cess royale 2:30 topacid (with acid on cess) to backslide cess slide to 360 farside fish (?) 2:39 topacid (with acid on cess) to backslide cess slide (180 spin) to cess unity (180 spin) (totally accidental) 2:43 topacid (with acid on cess) to backslide cess slide to 360 farside acid (?) 2:50 rear top x-grind to California slide (from california roll or walk the duck or toe heel) 2:57 x-wing to rough x-wing

@originalbiketricks 11 ай бұрын

super! You are crazy)

@bladelab 11 ай бұрын

i don't think it's as good as I wanted to be but I am glad you liked it :) lost a couple calories during filming them and sometimes spent full sessions doing a few of these, 30-60 try runs and a many sore days afterward haha

@kaugurid1608 11 ай бұрын

Can you please advice me . Can I fit ''MyFit Mesmer Original Liners'' size UK9 to my ''FR Skates FR2 80 Skates'' size UK8 . Kind Regards.

@bladelab 11 ай бұрын

Hi, unfortunately I can't advise you on that with confidence, try asking in a facebook group called blade tech.

@kaugurid1608 11 ай бұрын

@@bladelab ok thanks

@zlapatika 11 ай бұрын

Friendly tip: try using black medical or food gloves. Even white ones should do the trick-maybe even better, but I assume they would get dirty much quicker. I think it could make your videos look even more premium and professional since you already paid attention to the background and lights. The functionality is the same, there is no need for protection of these thick working gloves that makes you look kind of serila killer :) Rachard got it right.

@bladelab 11 ай бұрын

I normally have black latex gloves at home, I don't really like those tbh, I sweat in them so much and I only use it when I work with strong chemicals, not good for mechanical stuff, they tear so easily and they are one time use, so much waste those create. Btw I started wearing gloves in the early blade lab videos(that aren't even on yt) because I was : 1: freezing, I don't heat the other room where I work on all kinds of stuff 2: with artificial light, my hands sometimes get overexposed and oversaturated and looks like bright pink steak or something. Since I shoot mostly with natural light nowdays, it's not even necessary, it just stuck, sometimes I have it on, other times I don't. I think the opposite, the black latex gloves are the ones that give off that serial killer vibe.

@gadgettv2023 11 ай бұрын

Cool.

@SSJSkates 11 ай бұрын

Super rad, subbed 🤘

@YEE941 11 ай бұрын

Saw these on ig. Reconginzed those neon frame bolts and immediately knew it was you

@bladelab 11 ай бұрын

yea it went crazy on IG, it got like like 10k views in a few days, never had a post that got over 3-5k

@ravenouspathogen 11 ай бұрын

These look like aggressive versions of my Doops and the Doops don't feel stable or supportive and they're not very comfortable.

@bladelab 11 ай бұрын

Never tried doops, they are the same v2 skate with a raised heel plate, I never wanted to try doops because I know how soft and bendy V2s are (same as V1s) at least on me. I can't even skate 65mms on xjados/doops I would never think about puttin 90-100+ wheels on them,

@lonerblader85 11 ай бұрын

Xsjados are some of the most comfortable skates I’ve ever used

@bladelab 11 ай бұрын

@@lonerblader85 lucky for you, i ran a poll with 20 people and third get pain often and another third get pain sometimes while one third where you are experience no discomfort or pain

@iWashbar 11 ай бұрын

Ok that's some news 🎉

@Matt-uf2nc 11 ай бұрын

Cool! you could post a link to the new channel in the description

@bladelab 11 ай бұрын

True true , that's the only but most important I forgot , I post it in a second.

@jamsandwich6142 11 ай бұрын

They look like shoes for sale in saga magazine

@spookwackadoo Жыл бұрын

I really dig these foot wraps, it's pretty sweet you can buy em seperately

@bladelab Жыл бұрын

its a bit heavy tho, old footwraps were 300-350g , these are 500grams, i can skate them comfortably, today i skated them and EE eclipse on the other side, i will post a comparison review in a few days or weeks haha

@kevincollins8620 Жыл бұрын

I didn't know these could be bought alone, and these are totally on my list to scoop this year. I'll never skate xsjado, I dont care to try them. With the way people wear salomon shoes and keen and on... I'll be able to rock these casually and not stick out.

@joe_ferreira Жыл бұрын

Do they fit?

@yamiadarlo2887 Жыл бұрын

🎉DONT THINK SO... THIS SHOES ARE MADE FOR DL BOOTS AS WELL... SAD BUT I THINK HE CAN GET SOME WAY TO MAKE THEM FIT ON A DIFFERENT SHADOWS BOOTS

@joe_ferreira Жыл бұрын

@@yamiadarlo2887 I meant do they fit your feet so you can wear them in the summer? 🌞

@bladelab Жыл бұрын

They work for me as regular shoes vs the eclipse liners, i can't walk in those haha. Size wise they fit well both for walking and for skating. I am making an EE eclipse vs DL wrap comparison soon , today I skated by having one of each in my skates.

@swissblader8037 Жыл бұрын

The Foryos liner is in my eyes by far the best liner on the market for Roces M12 and the Razors Cult. They fit absolutely perfect with no need for adjustments.

@thegrimpeeper8865 Жыл бұрын

Really cool skating

@bladelab Жыл бұрын

thanks :)

@zac8294 Жыл бұрын

I want to know what is weight of those skates without frames and wheels

@bladelab Жыл бұрын

the size 44-45 with stock setup as boot only weighs 1.8kg

@tionik06 Жыл бұрын

I think you just saved me a lot of time and money. I appreciate the honesty.

@bladelab Жыл бұрын

and this is not only my opinion, I asked a few xjado heads who skate these to this day after more than a decade and they agree, it's heavy , feels bulky, uncomfortable, disconnected, painful, slips at the heel and who remembers what else, I love DL and EE but these skates on work for a select few and the rest of us, for the rest of us there are dozens of plastic and carbons boots that will be better in every way than these

Ең жақсы KZbin

Пікірлер