![KAC SR16 VFC V3 NPAS Installation [Knight's Armament Airsoft]](/img/o.gif)
2 ай бұрын
3 ай бұрын
4 ай бұрын
10 ай бұрын
Пікірлер
@vladbastea1558 3 күн бұрын
what scope is that ?
@KrayzieBuddha 6 күн бұрын
I heard a lot of issues with the SR-16 stock handguard (the two grub screws). I planning on buy this or the BCM
@ModifiedMilsim 4 күн бұрын
ehh yes and no. There are a couple quick fixes so I don't mind it. I think it's actually pretty nice not having to deal with the barrel nut and alignment of the traditional URX system. Makes hopup access very easy
@KrayzieBuddha 4 күн бұрын
@@ModifiedMilsim I was thinking about just changing the inner barrel and bucking that's pretty much it.
@eliwilliams4686 11 күн бұрын
I'm thinking of doing a kythera build. I'm new to HPA, what were you cutting with the dremel?
@ModifiedMilsim 4 күн бұрын
In order to fit the Amped Airsoft IGL Hose, you may need to Dremel the gearbox to fit the outer diameter of the hose. Same for the AEG Pistol Grip. I would recommend using the included polarstar hose with your engine. Make sure to also buy the fitting for the other end as I don't think polarstar includes it. The filtered one will be much better long term than the amped hose, and with this method there is no need for a Dremel
@Bornmong 12 күн бұрын
Which handguard is that?
@ModifiedMilsim 4 күн бұрын
URX 3.1 Handguard by ZShot for AEG threaded upper receivers
@theaveragekid09 18 күн бұрын
what charging handle do you use?
@ModifiedMilsim 13 күн бұрын
DE MWS N4 Charging Handle. This is the FDE version
@bxne.a 19 күн бұрын
Awesome setup! Can you do a before and after comparison? Thinking about installing the same setup in my main rifle.
@ModifiedMilsim 13 күн бұрын
Thank You! And yes possibly in the future! I'd say HPA is the best route for the Scar Platform, and the handguard is easy to swap to the standard rails if you wanted a shorter setup for CQB.
@bxne.a 13 күн бұрын
@@ModifiedMilsim Thanks for the answer! keep up the great work :)
@M4HRed 22 күн бұрын
This the cqb or 14.5
@ModifiedMilsim 21 күн бұрын
14.5
@BahmanSheibani 23 күн бұрын
❤😢
@AndrewONeill-d9j 25 күн бұрын
Also do you have any complete lowers available? For the v3?
@ModifiedMilsim 25 күн бұрын
No not at this time. Looking to order more VFC stuff in the future but is a bit more complicated than TM MWS.
@AndrewONeill-d9j 25 күн бұрын
Hey are you the one selling your sr16 and is this the new v3 knocker version?
@ModifiedMilsim 25 күн бұрын
Yes! This was imported from ProAct and here is what they have listed for the VFC SR16 2023 Latest Version of SR-16 E3 V3 GBB : > Upgrade to VFC V3 valve Knocker (Same as VFC BCM GBB series). > Upgrade to steel KAC style steel ambidextrous selector. > With 30rds M4 V3 gas magazine.
@deafboy95 27 күн бұрын
Is Npas useful for indoor? Since you able to adjust the fps
@ModifiedMilsim 27 күн бұрын
Yes it’s almost a must because you can adjust your fps quickly to be within field limits for indoor FPS requirements! Otherwise you’re banking on the rifle to be within those limits out of the box
@deafboy95 27 күн бұрын
@@ModifiedMilsim are they compatible to any gbb brand such as (WA,GHK,TM and etc) or just specific brand?
@ModifiedMilsim 26 күн бұрын
@@deafboy95 there typically is an NPAS for each brand (TM, VFC, WA, etc) Some rifles already come with one so just depends on the model you are interested in. Some rifles like the TM MWS does not come with an NPAS but in most cases can shoot under 350fps out of the box and be usable for indoor
@michaelmccr3294 Ай бұрын
Their is one that you haven't tried and that is the BCM mcmr rail
@ModifiedMilsim 4 күн бұрын
I did check the BCM Rail and it does fit the Noveske MWS N4 Upper Receiver. You may need a small shim to eliminate rail wobble. This is a common issue with the BCM rail in general but an easy fix.
@AaronGawin Ай бұрын
It’s been a while I’ve been looking for someone can show the noveske n4 finding out if mk16 or any Handguard in aftermarket will fit and here I’m watching on the spot thanks a lot man I do appreciate this because I was planning to get the urgi Handguard rail that you show but I really want it to do u think I can shaved those tabs of urgi and makes fit on noveske ? People saying if you shave the tabs of the urgi rails it would fit perfect and some other cut the tabs but I don’t believe those because once u cut the tab there’s nothing to hold the Handguard from wobble so I guess just shaved the tabs looking forward hearing from u 😎
@ModifiedMilsim Ай бұрын
I haven't tried it myself so I can't say for sure. But removing material by either shaving the handguard or modifying the upper should allow the MK16 handguard to fit. I had no idea how proprietary Noveske's design was. I would try to thin the tabs first and try not to remove them as they are part of the locking system to the upper. Glad the video was able to help you out a bit!
@JakesYourUncle Ай бұрын
KZbin recommends this video as I am about to do this exact mod to this exact gun when my npas gets here in two days… sus
@billinghamboyjohnny Ай бұрын
Where do you get your parts from? im trying to expand my range of websites is all
@IOAN2ER Ай бұрын
What is the name of the piece?
@ModifiedMilsim Ай бұрын
This is a Polarstar Product, the model is called the Kythera.
@trevor3304 Ай бұрын
Is it supposed to come with a different flash hider? Because mine didn't.
@ModifiedMilsim Ай бұрын
Both of mine came with a pinned orange flash hider and each one also had a steel flash hider included in the box.
@littlehuub 2 ай бұрын
For centering the PDI-W, it gets fairly quickly squeezed because on the outside it has those two rings around the bucking. You can shave those off to prevent this. Alternatively you can buy a unicorn gbb bucking, its generally the same as the PDI-W and doesn't have those rings around it. Have fun with your purchase, I own a V3 as well and its by far the best gbbr I own!
@ModifiedMilsim Ай бұрын
Thanks for the tip! Yeah I would say go for the Unicorn for that reason too. However, I haven’t tested either enough to give my final thoughts. The plan is to show the shooting results soon.
@nik4nik 2 ай бұрын
did the supressors come from airsoft artisan?
@ModifiedMilsim Ай бұрын
No not Airsoft Artisan. I am not sure if these are an OEM from another name brand.
@hughobrien1234 2 ай бұрын
Cost-effective FPS fix!
@nik4nik 2 ай бұрын
whered you get these?
@mayham_7258 2 ай бұрын
Can the gun handle a 11.1 stock?
@ModifiedMilsim 2 ай бұрын
As a stock AEG 11.1 might be too much. But with upgraded internals absolutely.
@NOBODY1286 2 ай бұрын
i just got into GBBRs i have the Noveske DE i need a new outer barrel. Can i put the TM MWS outer barrel on it? Or any MWS outer barrel?
@ModifiedMilsim 2 ай бұрын
yes I believe I used a DYTAC one for one of my DE GBBRs. Just make sure It is Marui Spec and you should be good. Slight modification might be needed to fit the hopup unit.
@NOBODY1286 2 ай бұрын
@@ModifiedMilsim ok thank you ill try that out. Your videos are great they have helped me a lot keep it up
@MinusX3ro 2 ай бұрын
What size dowel rod u using?
@RealM45 2 ай бұрын
What’s the giveaway going to be for?
@ModifiedMilsim 2 ай бұрын
Not sure yet! But want to reach a couple more goals, hopefully soon.
@DEAirsoftJerry 2 ай бұрын
Wait for next GBBR
@ModifiedMilsim 2 ай бұрын
can't wait to review whatever is next!
@CaptainLimpD 2 ай бұрын
Quick question what nozzle and size are you using ?
@ModifiedMilsim 2 ай бұрын
standard polarstar F2 nozzle for Scar H. I think it was #8
@mariadelcarmenruiz2260 2 ай бұрын
Could I use a ml decepticon bucking 2023 version with a ml omega ohm silicone hop up nub and a unicorn airsoft 265 mm mws 6.03 barrel for tm gbbs with this gun?
@ModifiedMilsim 2 ай бұрын
Yes should fit no problem. However, the combination of parts could vary in performance. Parts are sometimes trial and error to get the results you are looking for. But Unicorn and ML are among the best for parts, good place to start.
@mariadelcarmenruiz2260 2 ай бұрын
@@ModifiedMilsim alright Thxs👌
@MrC0mmercial 2 ай бұрын
Yo! Just curious, do you have the links to the parts installed on this video? Would be much appreciated!
@ModifiedMilsim 2 ай бұрын
Of course. The drop in nozzle I purchased from overseas. However if you search the part number I believe it's also available locally in the US. www.redwolfairsoft.com/accessories-gbb-air-nozzle-guns-modify-reinforced-drop-in-complete-nozzle-set-for-tokyo-marui-m4-mws-gbbr.html And the FEDA NPAS is only available direct at this time. www.federalconcepts.eu/products/tm-mws-feda-valve-npas
@MrC0mmercial 2 ай бұрын
@@ModifiedMilsim you’re an absolute boss ty!!!
@oskars8145 2 ай бұрын
Hi whats that pipe inside of mag gas tank?
@KyleW2408 3 ай бұрын
Good job. The only thing i would add is a range and accuracy test to the series of these styles of videos. Good job.
@ModifiedMilsim 2 ай бұрын
Thank you I appreciate it! Yes I'm still working on adding distance shooting. Right now I don't quite have the space but will definitely be a feature of the channel in the future.
@KyleW2408 3 ай бұрын
A few things Great to see a video on th scar, i have the scar as well and have experimented around to optimize its range and accuracy. The Edgi barrels are great for accuracy. Depending on what you want to shoot out of it, the acetech hop up nub for maxx hop ups allowed me to lift .4s also the g&g green nub got a great great air seal. For consitent shot to shot performance. Have you upgraded your mag yet? In the stock configuration, they are not great. Respringing them and the pts follower was a life saver when using .28s and above. With this setup, you can lift up to .48s and lob bbs to 110 yards.
@ModifiedMilsim 2 ай бұрын
Thanks for the info! I will have to check it out. I haven't heard of the acetec nub. And do you mean the GG green bucking? Did you modify the G&G? I also haven't thought about changing the internals of the magazine. Something I will definitely look into.
@bolbistroganofsky5946 Ай бұрын
Where did you get the springs and followers? Been having some feeding issues with mine
@zajaczkowskikamil 3 ай бұрын
Great Video! Could you be so kind and reveal the name of the mounted telescope and silencer?
@ModifiedMilsim 3 ай бұрын
The optic is made by Evolution Gear. The model is the Night Force ATACR 1-8x LPVO. As for the suppressor, I found it as a one-of, but similar versions are available overseas. It is an OSS/HUXWRX 762 Suppressor.
@zajaczkowskikamil 3 ай бұрын
@@ModifiedMilsim Thank you 😊
@codyk2498 3 ай бұрын
Followed these instructions and destroyed my threads. There's a screw you have to take out he doesn't show
@ferdinandolatin2125 3 ай бұрын
Thats not r hop. R hop has curve
@hotwheels84 3 ай бұрын
MR Hop is the same thing as an R-hop. The curvature shape depends on what style of nub you use. MR Hop is the way to go since you don't have to monkey around with a razor blade and silicone tubing for 30 minutes.
@ferdinandolatin2125 3 ай бұрын
@@hotwheels84 yes, my mistake. There is a curve
@COMMANDERHAWK22 3 ай бұрын
have you considered a real scar ?
@Auloss 2 ай бұрын
so he can shoot paper that do not shoot back?
@Baldzior69 3 ай бұрын
Hi! What can you say about this npas + nozzle setup? I have the same replica and thinking about using the same setup :) Any problems appeared so far?
@ModifiedMilsim 3 ай бұрын
So far it has been great. I have not had any issues with it. The only con is the NPAS is carried overseas. Im thinking of carrying them for anyone in the US. And I believe the completed nozzle set is available everywhere.
@11CharlieJMAC 3 ай бұрын
Nice had one🔥
@COMMANDERHAWK22 3 ай бұрын
had ?
@11CharlieJMAC 3 ай бұрын
@@COMMANDERHAWK22 my cyma brought with mods to the gearbox. Real guns I stick with a type A 10.5 5.56. The mk18 hurts with sim rounds some green berets in Korea had them and we trained with our M4s with them. Even 1st group doesn’t really rock scars that much it really depends on what they want to carry since SOF😂
@DMasiani 3 ай бұрын
What grip did you use? and is it compatible with regular AEGs?
@ModifiedMilsim 3 ай бұрын
Yes It is a fully compatible AEG Grip, with a baseplate for motor adjustment. I picked mine up from DH Gate, listed as "ERGO Nylon Grip".
@Steeler091 3 ай бұрын
Can you see over the peq box with the acog on? I have a peq15 on my scar and I can kinda see the back of the peq box
@ModifiedMilsim 3 ай бұрын
I don't really notice much, I'd say it's 90% clear picture. I do intend on creating a short to show POV shooting soon.
@Steeler091 3 ай бұрын
@@ModifiedMilsim ok thanks!
@Itsjustaglock 3 ай бұрын
I’m not sure if you could help me but I disassembled my magazine to fix it and now the bbs are chopping what should I do?
@ModifiedMilsim 3 ай бұрын
I have not experienced that before. But are the bbs chopping when you are shooting the gun? On the magazine it could be you are loading too many bbs, or if its on the gun side it could maybe be a faulty or broken nozzle in your BCG.
@Itsjustaglock 3 ай бұрын
@@ModifiedMilsim I don’t believe that it’s my nozzle it because this only started happening after I reassembled it again and It might be the spring
@Itsjustaglock 3 ай бұрын
@@ModifiedMilsim And the only reason I disassembled my magazine was because the Bolt wasn’t locking back on the last around but it was locking back when the pressure was low though
@aryarkoko6692 3 ай бұрын
Fuussgncz
@codybyrne-vp6ux 3 ай бұрын
What scope are you using? Is it the same one your mod 1 short?
@ModifiedMilsim 3 ай бұрын
This is a Chinese FDE Schmidt & Bender Scope 5-30x. t's not the same as the MOD 1 short that is a LPVO , but it is the same scope in the MOD0 short.
@edgarhernandez4503 3 ай бұрын
could you provide a link to the parts you bought please?
@ModifiedMilsim 3 ай бұрын
Yes I will update the description in the part 3 video with as many links as possible.
@JosheYT 4 ай бұрын
i wish it had 300 BLK markings still gonna get one
@pingpong808 4 ай бұрын
Niiiice! I love my cyma scar L! Get a lot of looks and compliments because of the lack of scars seen at the fields. 12:1 short stroked -3t, 18k motor, aster, and upgraded compression parts and bucking/barrel also surprises a lot at the receiving end too.
@Itsjustaglock 4 ай бұрын
As somebody who owns the N4 these videos are amazing and it helps me see what’s compatible with my rifle
@ModifiedMilsim 4 ай бұрын
Thanks for tuning in!
@brodude8641 3 ай бұрын
How’s the gun doing?
@Itsjustaglock 3 ай бұрын
@@brodude8641 It’s doing great so far Ive put around 4000 rounds through it and it still feels brand new the only thing that started to break on me was the magazines it came with
@brodude8641 3 ай бұрын
@@Itsjustaglock nice. How’s the stock hop and range?
@Itsjustaglock 3 ай бұрын
@@brodude8641 The stock hop is great but has the chance to overhop but I haven’t experienced that issue yet and for range I can hit a target from 40 feet semi accurately
@aryarkoko6692 4 ай бұрын
Fuussgncz
@gregoryfranks7347 4 ай бұрын
hello bro. im curious to know whether the parts were what was going to fail 1st or if there actually significant performance that is gained. I just got a black one of these and a VFC ump-45. I believe yours is like mine the emg Helios noveske. it has the keymo muzzle and the trade instead of 300 blkout, which I personally f-ing hate and a shitty crane stock. I wanted this version because I use only modified g&g stocks so the crane stock went right into the trash. I don't know if all are as outstanding as mine was or if I lucked out but the fit and fit out of the box is 100% as good as both my krytacs and it really impressed me for a 340 dollar MWS clones. any advice or tips you could offer would be much appreciated. those are my 2 1st gbbr's. any upgrades you've done or if you've had a 100 MWS gbbr's I'd be stoked for whatever noggin nuggets you felt compelled to pass on. be easy bro. cheers
@ModifiedMilsim 4 ай бұрын
Internally the only upgrades I really recommend are a nozzle and npas, barrel, bucking and nub combo. Other than that unless you want to mess with ROF or Recoil you can tune your buffer/bolt system. However, these MWS Noveskes are a great system especially for sub $300 on sale.
@DYLICIOUSPRODUCTIONS 4 ай бұрын
I’d also recommend any kind of weighted buffer to eliminate double feeding and also some spacers for the buffer tube since the bcg has a little over travel out of the box. I only needed 5mm give or take to keep the bcg from ramming into the buffer tube.
@aryarkoko6692 5 ай бұрын
Fuussgncz