the code brings a #include "utility/direct_pin_read.h" error; all the library zip folders were downloaded

Hey man , I am intrestet in your project. But I am thinking to modify it a bit rather than producing a sharpened pencil ; producing a round rod instead. It could also be useful to be able to control the diameter and the length of the output rod. One idea in my mind is to turn a commercial electric pencil sharpener into a machine that takes the square wood sticks in and outputs a round stick from the other end with a certain length and diameter. Can you do that project ?

is it possible to drill out the hole in the wire feeder unit by a fraction to inserta wider diameter wire. think the wire you have in there may be 1mm2. think 1.5m2 struggles to go through. I can't see it going wrong. the spring mechanism would allow it?

Hi. I have some queries : 1. I noticed that the EN pin of the Stepper Driver are not connected. How will the Stepper move ? 2. You have the Microstep resolution set to 1/16 but the "Step'" you sent to configure the stepper is 200 only. Shouldn't it be 3200 for 1 revolution ? I am trying to run in on a Arduino Mega 2560 with the CNC Shield. Weird thing is the Stepper reverse direction for certain lengths. I am trying to find an ESP32 to see if the issue lies with the Adruino.

my esp32 getting reboadted when i try it to display

1 сантиметр это минимальная длина зачистки изоляции? 4 миллиметра или 6 миллиметров не умеет?

Im having trouble with the 22awg stranded wire from cutting. The machine can strip the wires but it will not cut. If you have any suggestions, they will be greatly appreciated.

This is blade is from which product?

Mine goes out of sync and jams up, any fix for this (linear motors)

What should the voltage be on the 100uF capacitors? Thanks

That's a great project! Unfortunately I have an issue with cutting multistrand wires. It seems that there is some play from the lead screw nuts and that is enough for the multistrands to slip between blades. Any ideas how to prevent this? Edit. Fixed it with a pair of SWT508 220 machine blades from aliexpress, had to modify top and the bottom blade holder and it works perfectly.

Wow 3-years old and still new people coming across this and giving it a try.

Fumbled upon this vid but I'm glad it happened! Loved it. A quick one however, if I'm using 5V LEDs, do I still need the capacitor?

What a ingenious idea 👍👍👍😎

Make a airplane

Hi , maybe some one can make video or make a simple instruction about woie conection without arduno testin conection board ??? Becos I am new in projects and I need litle help how to conect all wire without artuino test board :) becos I cant understand how to conect wires .

Would you provide stl project file for 3d print please

Is there any way I can load this up to a ESP32-S3? Thanks!

This is great thankyou for sharing.

Hey my man, do you happen to have a schematic which I can use to power an 12V LED strip using three potentiometers, as shown in your setup?

Your project is really fantastic, I can't wait to do it! Is it possible to share the files in fusion360 format? Because I'd like to change the depth to make a shelf.

I'm not sure how much further you went with this project as I haven't checked your channel but a great addition would be to connect it up to a computer where you store a list for each wire configuration you need and have it automatically sent (or maybe just add an sd card for the same task). Additionally you could add an extra extruder for another wire without needing a second cutter by running both into a Y connection and set the code to extract past the meeting point for wire change operations (with that you could add either a tree of Ys or one multi input single output connector with the right geomeries). Will probably try making something similar soon, so I'm just brainstorming right now. May try to lower the cost a little by using something like a miller 100 wire stripper instead of cutters like yours so I don't need two steppers. I'd just anchor one half to the baseplate and the other to a stepper or possibly a servo. I also noticed with yours there was a bit of deflection of the blade during the cut, that ever cause any issue?

I like your Video a lot. However, I would like it to be in one color (e.g. white, red or blue) and above all much smaller, with only 1 to a maximum of 3 LEDs (instead of 9) in one element of the 7-segment display. Could you maybe make a video about it?

Simply amazing! Thanks, is just what i was looking for!!!

THX for Sharing

How you connected with car

Hey bro, i am having an issue, i have esp32-S board but on IDE i am unable to find mine board in the esp32 boards list...., also on my board the company name is not written please help me out 🙏🙏 Image link: drive.google.com/file/d/10RY8PET-wD5hWSp7Xx_KbQ548aI-XHaK/view?usp=drivesdk

Bro I am getting error in your code. Pls helpp😢😢😢🙏🏻🙏🏻

did you use any sensor for this project? futhermore, can we use other component for the wire feeding? I'm trying to build one with some additions.

What is board thickness?

by far the best explanation ever! what filaments did you use for the 3d printed parts?

Gracias

I have problems to upload clock configured file to ESP32 board. I get error message "command 'platformio-ide.upload' not found". I have unistall PlatformIO and delete also folder PlatformIO and reinstall PlatfromIO, but still have some problems.

Thanks for your video! This looks like a great project for my classroom. Has anyone added any additional features to further customize this project? I think it would be great to create a color change/flashing feature at the different times my students depart. It may also be valuable to create an audio alert to warn the students of their departure time. I am wondering if there are other ideas to add functionality to the project. Maybe the display could respond to a request through a smart assistant. For example, "Alexa, what is the current temperature?", could display the outdoor temperature. I can think of some other fun uses. Scores to the game of my favorite baseball team, etc. Has anyone doing anything similar?

Can I use Attiny88 development board? Is it same with the normal attiny88 microcontroller?

Maybe any1 can help me with this error code when i try to upload the code: command 'platformio-ide.upload' not found

Great video mate, just subscribed!

will it work if we pull latest wled from github?

Hi,The capacitor is how many volts?

Excellent work, go you!

Hi there! Saw this on Hackaday, and I was thinking of doing something like this but with a separate MCU module. But this looks fantastic, and it looks like something I can scale to a smaller 7-segment display clock.

how do u mesure teh wire size????

Have you check if it work outdoors ? Is the bright enough?

8A thru this tiny switch and thru the breadboard?

There is any schematic for the circuit?

Omega 750 machine

Great Project, i made some modifications to the 3D Printing parts since i printed it all in white and wanted to print it as complete part. 0,4mm height works fine and diffuses the light good. The Problem i have is, i can't install the usermod. I made all the steps described in the Video and on Github two times now, never worked for me. Right after opening the Project without doing any change i get the Error: [...] Invalid environment name 'codm-controller-0.6'. The name can contain alphanumeric, underscore, and hyphen characters (a-z, 0-9, -, _)", [...] I don't get where the Problem is, anybody with a similar issue and/or fix? Google didn't held :(