21 күн бұрын
4 ай бұрын
Пікірлер
@RidinKonnie 8 күн бұрын
Amen AMEN
@RidinKonnie 8 күн бұрын
My first was a mini bike, 5 hp , That was my start
@haneymoto 8 күн бұрын
That's Awesome.
@RidinKonnie 8 күн бұрын
Nice Catch , how many ?
@haneymoto 8 күн бұрын
I think I got 7-8 that day,
@RidinKonnie 8 күн бұрын
My 04 kaw 1000 has two keys, and I feel there should only be one
@haneymoto 8 күн бұрын
100% agree
@joshb9821 10 күн бұрын
Hi did you have to remove the bracket/clip for the water pipe on the left side in the end please? Thanks
@haneymoto 10 күн бұрын
Remove the bolt form the engine case, rotate the clip down and slide it off the hose.
@joshb9821 10 күн бұрын
@haneymoto thank you mate so you dont reuse the clip?
@haneymoto 10 күн бұрын
@@joshb9821 I removed it. If you do want to reuse it you will have to modify the cover. But it seems fine without the clip
@joshb9821 10 күн бұрын
@haneymoto brilliant thank you mate yes it looks a solid enough hose anyway so probably will not use clip also. Appreciate your help mate 👍
@zh4418 13 күн бұрын
I have a same bike same road6 same mileage and the tyres are so noisy now Not sure why
@haneymoto 13 күн бұрын
@@zh4418 me either. Mine are not noisy at all. Maybe have the balance checked or check the bearings
@CaptainDangeax 16 күн бұрын
Many tires can not last 6k miles. Michelin Road 6 can do twice that
@haneymoto 16 күн бұрын
I expect to get 8-10k.
@johnnysprocketz 18 күн бұрын
Would cost around $600 to line the drawers a 4x4 piece is $60
@haneymoto 18 күн бұрын
How big is your tool box? I was able to line the drawers in my 8 drawer toolbox with a single 4'x4' piece.
@johnnysprocketz 17 күн бұрын
@@haneymoto I need 15x24 feet
@haneymoto 17 күн бұрын
wow. How big is your tool box? 15’ x 24’ is enough to cover 360 sq ft
@johnnysprocketz 15 күн бұрын
@@haneymoto it's a big boy
@haneymoto 15 күн бұрын
@@johnnysprocketz I woudl say so if you need to cover over 300 sq ft.
@pentachronic 18 күн бұрын
Can’t see the wear indicators. Do these tires have them ?
@haneymoto 18 күн бұрын
There are some on the outer treads. Unfortunately in south FL I’ll develop a flat spot in the middle lone before wear out the sides of the tires
@pentachronic 18 күн бұрын
@@haneymoto Nothing in the centres ? My wear bars are about 1” apart from the centre. Just changed my rear out which is why I was surprised not to see any on yours. Maybe you’ve gone through those too and are close to the cord ? If so that’s not a sensible thing to do.
@dutchsailor6620 18 күн бұрын
Look a little closer at 1:25
@haneymoto 18 күн бұрын
@@pentachronic I just watched the video again. At the 1:01 part fo the video to the right of my thumb, yo can see the wear bars.I have not reached them yet. Appreciate you feedback and advice.
@pentachronic 18 күн бұрын
@@haneymoto Got it! Yep, deep in the tread pattern I see them now. Thanks for showing me this.
@-MANWITHN0NAME- 20 күн бұрын
😂
@bigpoppae6676 20 күн бұрын
gotta buy that dude a longer ratchet hes struggling😂
@haneymoto 20 күн бұрын
Gotta learn somehow 😂
@burpostockings 20 күн бұрын
I hope he pees on your door handles 😂 It is kinda nice when you get to do slightly less work
@user-bk2hn6yk3l 20 күн бұрын
don’t u get bored
@haneymoto 20 күн бұрын
😂
@8822fitzy 20 күн бұрын
Damn.
@larry68hd11 20 күн бұрын
Looks like fun
@haneymoto 20 күн бұрын
@@larry68hd11 it was a heck of a good time .
@larry68hd11 20 күн бұрын
Be. Safe😮😮
@haneymoto 20 күн бұрын
@@larry68hd11 yes sir.
@SeanieVoiceOver 21 күн бұрын
Great tyres BUT they're puncture magnets
@haneymoto 21 күн бұрын
Really, knock on wood I haven’t had any issues
@SeanieVoiceOver 21 күн бұрын
@@haneymoto I had three punctures in one day ! Shame because I loved the tyres
@haneymoto 21 күн бұрын
@@SeanieVoiceOverwow. Were they caused by road debris?
@SeanieVoiceOver 21 күн бұрын
@@haneymoto Yes ! The front tyre flips sharp objects for the rear tyre to catch, the wide sipes leave large areas of soft vulnerable rubber! A lot of my friends who ride love these tyres too but have had multiple punctures, screws, nails, flint shards etc they’re magnets for sharp things
@phils4634 22 күн бұрын
Whilst I'm an absolute fan of Michelin World Tours on my bicycle, I've found Metzeler tyres seem to offer a better cost vs performance benefit. I use their FeelFree tyres, 120/70 R15 front, 160/60 R15 rear.
@haneymoto 22 күн бұрын
I’m glad the Metzeler tires work for your application. Appreciate you watching and commenting
@pentachronic 18 күн бұрын
Metz are great tires but damn I found that they wear fast. Typ 3k and I’m done! Maybe the newer compounds are different ?
@phils4634 18 күн бұрын
@@pentachronic I'm easily getting 6k from the rear tyre alone. Mind you I'm riding a Super Scooter (Kymco AK 550), mainly as a work commuter, so this might explain things! Most of my mileage is on sub-80k local roads, usually in medium traffic.
@pentachronic 18 күн бұрын
@@phils4634 AFAIK, Scooters have a different loading and don’t shred tyres like heavier motorcycles. This is maybe why you get better life.
@ericveal6681 23 күн бұрын
That was a fun day! But I really like to do next time we go is session certain sections of the trails, or the roller coaster do it five or six times in a row or whatever trail it is that we like in that way you get a little more dialed in, also let you feel if you need to change the settings on your suspension for a particular obstacle or not.
@haneymoto 23 күн бұрын
Agreed. Repeating the same paths will definitely help a lot. Like you suggested start the day with the roller coaster when I I’m fresh. Then move to something easier like the trails
@ericveal6681 23 күн бұрын
@@haneymoto we can session certain parts of the trails , tracks that we want to get better on or feel more confident. On of the hardest things about trail riding is a lack of repetition on the course. A place like Bone valley really lends itself to be able to work certain sections over and over without being in the way of everyone else.... Especially those kids on the '60cc bikes s lol
@haneymoto 23 күн бұрын
@@ericveal6681 Those little bastrds out ride every day of the week and twice on Sunday. 🤣 I'd also like to get your expert instruction on wheelies and catching a little air with the DRZ.
@ericveal6681 23 күн бұрын
@@haneymoto We can definitely work on that!
@FullThrottleJunkie 23 күн бұрын
i need to go!!
@haneymoto 23 күн бұрын
You’re always welcome to tag along
@Phillzillaa 23 күн бұрын
🤘🤘🤘
@haneymoto 23 күн бұрын
🤘😈🤘
@TheeLooseJuice 23 күн бұрын
So jealous. Haven’t been trail riding in a while.
@haneymoto 23 күн бұрын
Juice, Bone Valley is only 40 mins from Forgotten Angles. Bring the KTM down and we'll go.
@landshark171 24 күн бұрын
That looks so good with the gold wheels! Did you change them out or have the blue ones redone?
@haneymoto 24 күн бұрын
They are powder-coated. LS Powder Coating in West Palm deserves all the credit. kzbin.info/www/bejne/b4Dai3t-hKiqd9Esi=iPmQCEt9nyBZNv6z
@zh4418 13 күн бұрын
@@haneymoto how much was the powder coating?
@haneymoto 13 күн бұрын
@@zh4418 300
@ar2043 25 күн бұрын
Hey Josh!!!! It's been a while since I've checked in. Busy with work, phone issues, life.... blah blah blah.... 😂😂😂 Anyway, hope all is well. Glad to see you're still making content!!!
@haneymoto 25 күн бұрын
Appreciate that. I'm still having fun making videos. Next set of videos will be riding Bone Valley ATV park in Polk County FL. First time riding dirt in 25 years.
@ranz1337 25 күн бұрын
Do you even turn? 😂
@haneymoto 25 күн бұрын
Not in south FL. 😂
@Rockabillykid23 29 күн бұрын
What tyre pressure are you running
@haneymoto 29 күн бұрын
I run 36 psi front and 42 psi rear.
@efficacitejm 29 күн бұрын
I opted for Dunlop Mutant tires on my Suzuki B-King and managed to get around 10,000 Mi out of them. However, I did experience a flat tire, likely because I frequently used my bike for commuting on the freeway., maybe I will try the Road 6.
@haneymoto 29 күн бұрын
You won't be disapointed. They are a great tire. Appreciate you watching and commenting
@mits0sdallas433 Ай бұрын
My dream moto. Don't sell in greece fck Euro 5
@haneymoto Ай бұрын
That sucks. Move to the US. We don’t give a shit about the environment 😂
@samboles3670 Ай бұрын
Question about your mMT09 Motorcycle, how do you find the brakes, and can you compare them to other bikes such as the KTM duke?
@haneymoto Ай бұрын
I have no issues with the brakes. Bike stops well for me. Not much to compare it to though
@SludgedB 20 күн бұрын
@@haneymotojournalists always complain about the brakes and stuff but really these new Yamahas are fine. They just need to make their word count and they’re not top tier in braking so they say it. Doesn’t mean they’re in anyway bad though.
@ac2-rm141 14 күн бұрын
@samboles3670. I own a 2022 MT09SP. Upgraded to a reputable brand stainless/braided brake line and sintered brake pads front and rear, a 100 percent upgrade. Ridden about 4K miles with this setup and notice no difference in the upgraded brakes versus the stock brakes. I am sure the parts that were installed are top notch, but I do not notice the improvement. This upgrade was roughly $600. As they say YMMV if you go this route. I had the Road 6 tires installed on the MT09 at 6,200 miles, the Battlax had a significant flat spot down the middle of the rear tire and cord was showing. Not a single burnout, etc on the rear tire. Am now at 14,400 miles on the MT09 and they do show a bit of wear, but guessing good for another 3K miles or more. The tires were a better upgrade than the brakes, by far. Now just need to upgrade the stock exhaust! Love the CP3 engine!
@BeanbagButters Ай бұрын
The modification you suggested of securing those straps under the seat is great. I did this on my MT and it's been working great. Thank you.
@haneymoto Ай бұрын
Glad it work for you. It really makes it easy to tuck the straps away when you’re not using the bag. Appreciate you watching and commenting
@TommyNitro Ай бұрын
Woah, ditch those death wings...er, trail wings for some proper rubber and off road will be way better.
@haneymoto Ай бұрын
@@TommyNitro yeah they need to go. I just got it and it’s only got 350 miles on it.
@TommyNitro Ай бұрын
@@haneymoto Great bike. New tires changed my DR.
@sicsempertyrannis4104 8 күн бұрын
It’ll hold a lot more dirt than that 🤙 nice bike 👍
@haneymoto 8 күн бұрын
@@sicsempertyrannis4104 Yes it will. By the ned of the day you couldn't see my sticker on the swingarm. LOL
@robb6120 Ай бұрын
Thanks for sharing. I'm currently run the o.e. Michelin Road 5s on my Trident which I ride pretty hard through my local twisties in New Zealand. I'm very happy with the Road 5s but reckon I'll go for the Road 6s when time to change. Cheers 👍
@haneymoto Ай бұрын
You’re welcome. You won’t be disappointed with the Road 6 Appreciate you watching and commenting
@HaggisPower Ай бұрын
If you can find them in NZ. Seem to be perpetually out of stock...
@LesDeplorables Ай бұрын
I just installed the Amazon 45 kit. I noticed the blower doesn't blow as fast volume as it did before. I'm in Phoenix and I can tell the difference instantly
@caspersoutdoors Ай бұрын
I have time for all three 😆
@haneymoto Ай бұрын
🤣🤣🤣🤣
@YantoSP Ай бұрын
Nah, I got 10k out of mines bro! Keep going!! 😂
@haneymoto Ай бұрын
Yes sir, I'll ride them until the threads show. Hope you're healing well.
@YantoSP Ай бұрын
@haneymoto it's coming along bro. Long road...but it's coming along. Thanks for asking!
@PureEvolution Ай бұрын
There best all round tyre great wear got just over 9k on mine when i tested them over 2 tours so alot of mixed riding
@haneymoto Ай бұрын
Glad to see you are having a similar experience. Appreciate you watching and commenting
@motosportadv8177 Ай бұрын
Thanks for the review , I like how the handle tucks away, I'm ordering one!
@haneymoto Ай бұрын
You're welcome. Over two years now with the stand and its still working great. Appreciate you watching and commenting.
@motosportadv8177 Ай бұрын
@@haneymoto Great good to hear!
@slo2sixty153 Ай бұрын
Definitely planning on going to these after my s22 wear out. Thanks for the vid!
@haneymoto Ай бұрын
You're welcome. They are great all around tires. Appreciate you watching and commenting
@SludgedB 20 күн бұрын
I’ve got a ‘23 mt-10 and I’m gonna get s22s again. They’ve been awesome
@haneymoto 20 күн бұрын
@@SludgedBmy S22s were great performing tires. They just didn’t last very long. I only got 2800 miles. I commute and go on longer rides so mileage is important to me
@ron140088 Ай бұрын
I've had road 6's on my 2021 for about 4k mi now. My riding terrain is very different than yours. I live in Oregon near the coast and every where I go it's on curvy roads. The road 6's are quite grippy in the damp oregon coast.
@haneymoto Ай бұрын
I think they are the most versitile tire available. I'm glad they are working out for you. Appreciate you watchign and commenting.
@Phillzillaa Ай бұрын
🤘🤘🤘
@dreaminginink2029 Ай бұрын
Just wanted to let you know that your content is excellent.
@haneymoto Ай бұрын
Thank you for the kind words. Really appreciate you watching and commenting
@garetthomas7009 Ай бұрын
Did you drain the oil before installing the covers?
@haneymoto Ай бұрын
No need to drain the oil. You only remove 4 bolts from the covers. So the seal is not broken. Appreciate you watching and commenting
@stef4793 Ай бұрын
i have a question about the sc project s1 exhaust you put on your mt09sp, can it be mounted on the new mt09 2024? thanks
@haneymoto Ай бұрын
The 2024 MT-09 is updated and not the same as the 2021-2023 models. I do not think it will fit. Best advice I can give it to contact Motovation USA. They are the US supplier for SC Project. They would be able to tell you for sure.
@stef4793 Ай бұрын
@@haneymoto alright thank you so much
@kyled4156 Ай бұрын
Great work my friend, looks sweet👍
@haneymoto Ай бұрын
Thank you. Always appreciate your support
@hansd3295 Ай бұрын
Thanks for this vid. It helped me out for the wright connector. ❤
@haneymoto Ай бұрын
You're welcome. Glad it helped Appeciate you watching and commenting
@hansd3295 Ай бұрын
@@haneymoto it’s now mounted on the brand new SP09 gen3 🙏🏻
@haneymoto Ай бұрын
@@hansd3295 Nice
@user-pk8cr1co9b Ай бұрын
What # of the fuse
@haneymoto Ай бұрын
I believe it is F1 and the size is 40A
@Swisha90s Ай бұрын
Did u use the original spacers when mounting the screen?
@Swisha90s Ай бұрын
And did u get more wind under the helmet, noise lvl?
@haneymoto Ай бұрын
@@Swisha90s wind noise is greatly reduced. But a quality helmet makes a big difference too. I'm partial to Shoei helmets. If I recall correctly the spacers that come with the wind screen replace the original washers.
@chrispulham4779 Ай бұрын
At least you had a go and got it done, good on you!👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
@chrispulham4779 Ай бұрын
Hi, your front stand doesn't look very secure. I jack my bike up under the motor.
@haneymoto Ай бұрын
I felt teh same way when I first put it on there. But its been solid and stable. I am considering making a small modification to help it no touch the ABS sensor. Appreciate you watching and commenting.
@anthonyscott16 Ай бұрын
Sounds like you have a pretty realistic plan and perspective with this bike. I’m guessing it’ll serve you well. Enjoy!
@haneymoto Ай бұрын
It’s going to be fun building it out and getting it dirty. I appreciate you watching and commenting