Looks more like a shiny Matt finish. The Spray cap is more of a mirror Gold compare to the spray
@simoncourtney1592Ай бұрын
Where do you get the data from? AIRAC?
@LeHoangMai-xx2vz2 ай бұрын
how to get administrator rights and compatibility?
@katiuskadel73104 ай бұрын
great job! wow, so evenly done!
@techwithsibro5 ай бұрын
wow. this is amazing, I am new to pyqgis, this help me a lot. Thanks!
@javargas9175 ай бұрын
Antonio, thanks so much for the video but i have some questions. A couple questions, what shortcut do you use for the stop editing? And how do you work around the click of the pen on the tablet versus the pen floating in the air but registering movement? I find this very annoying and some additional settings to the stream digitizing option would be very helpful.
@yusumain5 ай бұрын
How long it last?
@SHEHABBISHR6 ай бұрын
Thanks for the great information
@MrPJBarney7 ай бұрын
Thank you for this extremely helpful video. You are very knowledgeable with the software. May God, the Father of the Lord Jesus Christ, bless you.
@asiancracka2427 ай бұрын
This is a good PSA to not huff paint spray cans.
@frankwoods96808 ай бұрын
Looks bronze
@antoniolocandro8 ай бұрын
probably the light but color is gold
@christianmayaragozin49518 ай бұрын
Hi, where can I download the software?
@antoniolocandro8 ай бұрын
Unfortunately, no longer provided by ICAO. As it is copyrighted material it is not easy to pass along
@maridybum9 ай бұрын
necesitaba mucho saber esto, muchas gracias!!
@Iwantbelieve11 ай бұрын
Thanks! What if I want show something else than distance in label values? for example with this airport case a noise (for example decibel value) ?
@ArrogantBastard9511 ай бұрын
awesome. I was struggling with the implementation of the script and saving the output to the current instance map layer. great content
@ShalahMarie_Go4au11 ай бұрын
Dude. What?
@lunmun-wh1fu11 ай бұрын
Thank you!
@yeseniaarredondo4016 Жыл бұрын
Hey, thank you for sharing. I do not want to sacrifice a lot of hard disk space so miniconda looks like a nice option to start creating jupyter notebooks. Thanx again. 🙂
@antoniolocandro Жыл бұрын
glad it helped!
@cachitas510 Жыл бұрын
This vid is pretty cringe
@queenofsheba827511 ай бұрын
This comment is very cringe
@dancearoundtheworld53602 ай бұрын
based opinion
@patocallaghan3648 Жыл бұрын
How many coat would you recommend dude
@antoniolocandro Жыл бұрын
I did one coat and I am not so good painting so had some paint run as it as too thick. One coat will be OK if done properly
@patocallaghan3648 Жыл бұрын
What colour did you use as a ground coat @@antoniolocandro
@antoniolocandro11 ай бұрын
@@patocallaghan3648 didn’t add any ground coat on this project
@MrConeHatMan Жыл бұрын
e
@inshadow9635 Жыл бұрын
Can I use other brands of mouse pen? and do I need a plugin?
@antoniolocandro Жыл бұрын
I think you can use any brand and no plugin is required as the pen is just replacing the mouse really
@pedro-ss3fo Жыл бұрын
Thank you! I'm working with hydrographic basins, and i'm thinking on using this to automate this part. Altrough, we got river buffers(line shapefile) and point shapefile water source buffers, and we merge both buffers, then dissolve. Do you know if i can i put a merge or union algorithm in between the buffer, and then dissolve? Thank you, that really helped.
@antoniolocandro Жыл бұрын
Should be possible, I guess you buffer first rivers the points collect into a single layer and dissolve as needed. Would be interested to know if you solved it
@melanieveenstra4586 Жыл бұрын
Great video! :) Sadly Im getting an error when I tried to intersect the exterior ring to the created line. The labels disappeared. My preview says NULL. Do you know how to solve this?
@antoniolocandro Жыл бұрын
Is everything in the same coordinate system?
@jeremiahmarimon163 Жыл бұрын
Hello, I would like to ask how you were able to uncheck/check multiple layers all at once with just one click in QGIS?
@antoniolocandro Жыл бұрын
If I remember correctly select all layers and use spacebar?
@WP4teen Жыл бұрын
Hello, I have exported a full data snapshot of the AIXM database, but I cant add a vector layer, there is allways an error when trying to add the .xml file. There's any pre configuration ? Thank you!
@antoniolocandro Жыл бұрын
Absolutely no pre configuration, you just need to drag n drop into the main canvas. What version of AIXM are you exporting to?
@leonelapineda7817 Жыл бұрын
I'm a honduran student. this video helped me. thank you.
@antoniolocandro Жыл бұрын
Great that it helped out
@studenttogermany Жыл бұрын
Thanks for making this video. Its very helpful but for me it has given me half answer as far as my assignment is concerned. I want to have a query for whole work. Like from extending lines to the nearest line on the basis of one or two vertices. then converting those very new polygon shape into polygon. I have also done it manually but need command to do it automatically. Do you have any answer?
@studenttogermany Жыл бұрын
its amazing. i am also working on such data. Could you please make a video in how to do the Geoborder encoding using annotation or href?
@antoniolocandro Жыл бұрын
Thanks for liking the video, are you referring on extracting the border from a GIS file and then pushing it in the corresponding AIXM geoborder tag?
@studenttogermany Жыл бұрын
@@antoniolocandro this one. (Geoborder for Airspace Border Skip to end of metadata Created by Wolfgang SCHEUCHER (Solitec), last modified by WOLFGANG SCHEUCHER on 22 Nov 2018). (Geoborder for airspace border) Could you please open this link by copying paste in google. I want you to please make a video out of it by solving the issue mentioned in the document through the two solutions already written in the document
@Aagahstudio1010 Жыл бұрын
😍😍😍
@antoniolocandro Жыл бұрын
thanks for the comment
@mustaphatitou3662 Жыл бұрын
thanks for your explanation, actually i'm looking to get the layers ordered like in "layers panel" not alphabetically , can you please give me a tip
@barygol Жыл бұрын
Hi, I want to create 3d model of airspace from GPS coordinates with different floor and ceiling altitudes. Can I do that with Qgis? Or only with a flat floor?
@antoniolocandro Жыл бұрын
It would be better if you did a script or processing modeling to be able to achieve what you want, getting the Z for the ceiling and floor is not the issue but being able to construct the walls of the 3D volumes
@barygol Жыл бұрын
@@antoniolocandro could you clarify a bit what you wrote? I'm totally new to this. Where would I use this processing? In Qgis? Maybe there's better software like some CADs to achieve what I want?
@antoniolocandro Жыл бұрын
docs.qgis.org/3.22/en/docs/user_manual/processing/index.html; don’t think any other software will give you advantages. The minute the floor is not the ground you will need someway to calculate the walls of the 3D volume. When the floor is the ground you can calculate the ceiling and extrude to the floor.
@roelmsantiago Жыл бұрын
Good afternoon Antonio! I ve been checking your youtube tutorial from to time for guidance. I have a query, Do you have demo for the reverse workflow? Meaning, Generating AIXM 5.1 file from the layer feature? Coz what ive been currently doing is for each feature type, i generateed aixm:members and combined them in notepad++ which is very archaic and time-consuming. It's been on my list for quite sometime, i believe it needs python coding which i have little knowledge of but for purposes of laying groundworks for such approach. It would be nice for us QGIS users belonging to aeronautical information domain to know the possibility of generating such xml on the feature level. Tks in advance
@samiseyhan2854 Жыл бұрын
it helped a lot, thx for sharing
@antoniolocandro Жыл бұрын
Glad it helped! I definitely struggled to use it until I understood the principles on it. I haven’t checked the current official documentation but may I should to see if it can be improved
@djsigvaldason Жыл бұрын
Thats cool.. How did you create the buttoms? With Virsual Studio? I'm also looking for a Qgis plugin.. :)
@antoniolocandro Жыл бұрын
If you use streamdeck they have their own app which you can program the hot keys and macros which are then passed to the device. I would like a physical board but it’s considerably more expensive
@StefanoVerugi2 жыл бұрын
if you don't mind please take the bg music a few notches down, it's a tad distracting 😊
@antoniolocandro2 жыл бұрын
I will try this on the next video I eventually upload, can't re upload videos unfortunately without loosing the views
@StefanoVerugi2 жыл бұрын
thanks for posting could you please zoom in a bit? not easy to watch on small screen, cheers
@antoniolocandro2 жыл бұрын
I will take into consideration is just that the zoom part is more editing time but you are right! I do have a 24 inch monitor so I maybe am missing the fact other people have smaller ones
@cesavila952 жыл бұрын
Its really helpful! but Can you do an example with PyQgis code? I don't get work :(
@israelleonardolopez28322 жыл бұрын
This is inspiring.
@antoniolocandro2 жыл бұрын
Thanks! Really there are a lot of things that we can start doing little by little and over time improve our skills. Automation specially the boring tasks should be one of the first steps
@Stoney-g1o2 жыл бұрын
Great work Antonio! There are so many layers to this problem. You have to work on this problem little by little over time. It will not fit neatly into a project manager's 2 week sprints or multiple sprints unless you have already been working on it for a while. Though the productivity or correctness gains can pay off in future client work.
@antoniolocandro2 жыл бұрын
Little by little improving skills and making things more automated is the goal, I’m my own Project Manager so that helps for sure
@parsonspig2 жыл бұрын
Really helpful - thanks
@antoniolocandro2 жыл бұрын
Glad it was useful
@peterbisimbeko7232 жыл бұрын
I'm following your steps but it fails to select with outline only
@antoniolocandro2 жыл бұрын
What version of QGIS are you using and which OS?
@gregorkalan8370 Жыл бұрын
Check your expression "is selected ()" Don't forget for ")"
@gregorkalan8370 Жыл бұрын
The expression must be in black, not red colored
@koryarizona4wd1522 жыл бұрын
Just what I needed, great explanation. Thanks!!!
@antoniolocandro2 жыл бұрын
great that you found this useful!
@Pedro-9442 жыл бұрын
good video any one knows why the trim and extend often do so incorrectly? just as in the video you showed some instances of errors that where corrected once you changed CRS
@antoniolocandro2 жыл бұрын
Most tools in QGIS only work correctly with a projected coordinate system (PCS), I suspect this is the case with the trim/extend tool.
@moendopi54302 жыл бұрын
@@antoniolocandro So I've been using this tool a lot for a while and I can't figure out how to chop off the dangles/overshoots. I do a lot of topological editing and the extend feature is really convenient. To trim I just use the vertex selecting tool and highlight the node of the overshoot and just delete it. I'm also working usually in NAD83 UTM 17N or 18N, so as to the projected system, it hasn't made a difference for me. I have found that snapping becomes a real issue if you have your project in one coordinate system and your data is in another or the wrong one (e.g. the project is in 18N but the geopackage for your lines was set to 17N.) Edit: Messing around a bit, I did get the trim tool to work, but I had to have a line that intersected the other without a node at their intersection. I usually run a smooth on my lines (for maps), then v.clean and fix geometries to take care of the majority of the topological errors. In the snapping tool bar I always keep toplogical editing turned on which will create a node when snapping a line to another. However, QGIS will see a dangle at that intersection until you split the line at that intersection. v.clean or fix geometries will usually either create a node at a dangle or split it, so the trim tool can't work on something like that.
@sudeeproy2662 жыл бұрын
You can replace the CD with Sata SSD
@antoniolocandro2 жыл бұрын
No CD on the laptop, but good to know that is an option maybe for others
@ruslanhuseynzade90372 жыл бұрын
It will be better if you will show from basics. Even where to download free qgis, what kind of benefits it has and etc.
@antoniolocandro2 жыл бұрын
There are many videos already here on those topics which you can watch, this is just the specific application of reading AIXM 5.1 but will take into consideration
@danielerinaldi31232 жыл бұрын
Thanks Antonio for this useful video, well explained! I use isodistance rings to approximate accessibility times from a service center. Instead of the entire ring, in some cases, it would be more appropriate to represent only a portion / angle of the ring (as a sort of "fan"). Through the geometry generator (or other tool), would you know how it could be done?
@antoniolocandro2 жыл бұрын
Thanks! I think it would be possible but could you provide me an example to see the final expected result. I think in principle you could draw the polygon and intersect the rings, that would give you a snapshot and if you wanted some more dynamic you could do the same using geometry generator options
@danielerinaldi31232 жыл бұрын
@@antoniolocandro thanks for the suggestion, I'll definitely try! My problem is that my study areas are often mountain and border areas. Accessibility is therefore often naturally constrained only in a few directions. I overlap the isodistance rings with the road isochronous areas, but I don't need the whole isodistance ring (... which crosses the mountains), just the "fan" in the direction of the isochronous towards the valley.
@antoniolocandro2 жыл бұрын
@@danielerinaldi3123 if I understand correctly do you want just the blue line like here ibb.co/GHVxKFL
@amanbagrecha2 жыл бұрын
This was very helpful. Thanks
@antoniolocandro2 жыл бұрын
Awesome!
@jigmetenzin75962 жыл бұрын
It would be great if you could share your expression with your video. Great tutorial though!!!
@antoniolocandro2 жыл бұрын
updated the description of the video to include the expression used in the video, good idea!
@Refreshment012 жыл бұрын
Agree, well done. The other minor suggestion is to zoom on the expresion box if possible. Is hard to read on small screens.
@antoniolocandro2 жыл бұрын
@@Refreshment01 Zoom in is on the list of things to improve, it just requires extra editing which is more time ;)
@josebiscaia6702 жыл бұрын
GREAT JOB. I am a cartographic engineer at the Instituto de Cartoghrafia Aeronáutica (ICA) in Brazil. We who produce this data. I didn't know about this possibility of QGIS. Great.
@antoniolocandro2 жыл бұрын
You should use more QGIS then! It has improved quite a bit lately. I work also with aeronautical charting. Great that your team provides the actual data instead of just paper or PDF
@josebiscaia6702 жыл бұрын
@@antoniolocandro In GeoPdf
@josebiscaia6702 жыл бұрын
@@antoniolocandro and too WMS WFS I send URL tomorrow
@antoniolocandro2 жыл бұрын
@@josebiscaia670 please do!
@josebiscaia6702 жыл бұрын
@@antoniolocandro WFS
@mukhitospopeye99142 жыл бұрын
First one
@antoniolocandro2 жыл бұрын
I actually have a few more videos already up you can go check out