I am in the middle of doing onsite training.

It sounds like you need to join some vectors.

Would need to see your VCarve file.

Thanks Working on some more will take your suggestion

Sundaram, if you have the more recent VCarve Pro or Aspire software, this 3D clipart comes with it.

You can enter the coordinates for you rotation center at any place in your material. A circle within a circle will appear where the center the center of your array will be placed.

@@brettdickinson7708 Is there any easy way to find a coordinate of a point by selecting it? Looks like there is no other way to select an existing point without knowing its coordinate...

@@fathmi Just create a small circle and place it where you want. In the Draw Circle dialogue box it will show its center point. You can write down those coordinates and enter them into the Rotation Center boxes of the Circular Copy dialogue box.

I usually get my clock components from www.klockit.com/ or you can also find items on Amazon or at Woodcraft.

i was probably using the arrow keys.

@@brettdickinson7708 thank you

Istvan, I am very busy doing onsite setups and training the next three weeks. I am not quite clear what you are asking. Are you asking how you can label, print and save 3D views so you can use them to provide instructions for yourself and others?

@@brettdickinson7708 Not really! so i would like find out if i make a same thinks like you did in here, how i make a cutting list from it ? like side size=X, then self size=X etc... I hope now you understand me, sorry for a language in talking i can explan but in writting is hard is not my mother tongue... and when you do the actual toolphats for it how is works in order... :D

Sorry for not getting back with you. I cut out a jig to hold the wood, make screw spots and use pocket screws.

I went back and listened again and saw wht you said and did .So do you have more vcarve videos. Jeff

@@resorter66 Jeff, sorry for not getting back with you. You hold down the Shift key and left mouse click on the object you want to deselect. There are some more tutorials in the works.

Sorry for not getting back sooner. If you have items that are grouped, you need to ungroup them first by pressing the U key (G = group, U = ungroup). If you drag your mouse from right to left, anything that you touch will be selected. If you select too many items, you can unselect the ones you don't want selected by holding down the Shift Key while at the same time clicking those items with your mouse pointer on the items you want to unselect.

Sorry for not getting back sooner. When you purchase VCarve Pro 8 for above, you get 10 sets of clipart with 9 of them being 3D clipart models. After installing VCarve Pro 8 or above (or Aspire), you must run the executable files for each group of clipart. They should then automatically appear in your Clipart tab when you click on Clipart.

More are on the way. Posted two more today.

Starting with VCarve Pro 8, there is a lot of 3D clipart that comes free; just click on the Clipart tab at the bottom; if you want to get 2d clipart, you can import a bitmap graphic and use the Bitmap Trace tool to convert to vector

Sorry for not getting back sooner. When you purchase VCarve Pro 8 for above, you get 10 sets of clipart with 9 of them being 3D clipart models. After installing VCarve Pro 8 or above (or Aspire), you must run the executable files for each group of clipart. They should then automatically appear in your Clipart tab when you click on Clipart.

Learn english

shiver me timber Can a man not ask for his native tongue.

THANKS

THANKS for the feedback.