Diehl Does

Пікірлер

@heffedirte6243 3 ай бұрын

Dear lord baby Jesus, do not use that dirty fluid off that dirty table to lube seals. Now that junk is inside of your brake and steering systems. And please clean important things before you open them and clean the insides after opening them. I hope anyone reading this already knows this.

@ihabismail-s4d 3 ай бұрын

Very bad 👎

@gudotto 4 ай бұрын

Great 4166

@doylerabjohn3435 11 ай бұрын

Nice restoration

@chipngo9758 Жыл бұрын

Everything is beautiful in this video. ❤️ machining, music, the lower receiver. You have a great taste my friend.

@freerepublicusa2064 Жыл бұрын

Is there a certain direction for the dump valve? I put new seals in my hydroboost from my 18’ ram 2500 6.7 (the hydroboost and power steering were working perfect other than a leak). Mine doesn’t leak but now there’s a hiss when turning the steering wheel and when you turn it applies the brakes. Something is not right. The brake work fine .

@DiehlDoes Жыл бұрын

I’m not sure

@jaredreck882 Жыл бұрын

Nice intro! Haha and thanks for sharing i appreciate it

@paulmanhart4481 Жыл бұрын

Hi. Nice job, but too fast for me. I have a 1968 SB 10L. How do I remove the knurled tumbler knobs? Any idea? Thanks, Paul

@bandhanmondal4685 Жыл бұрын

Finally the perfect work + Mozart sync ❤️🥰

@zachyoungblood7003 Жыл бұрын

Anyone have a link for the reseal kit ?

@ronniephipps6555 Жыл бұрын

Boost auto has a video on it an a link. Google boost auto parts I just ordered mine for 20 dollars for both seals

@BearMeat4Dinner Жыл бұрын

How bout using clear metal ?

@joehiden7475 Жыл бұрын

All I can say is wow! So cool and your machine capabilities are nothing short of professional. My hats off to you., I know how much work is involved to do this.

@moonlightfilms5279 Жыл бұрын

Q: Why do they call it a ghost gun? A: Because you can see through it.

@dustintunis9347 Жыл бұрын

You really shouldn't use your hand as a hammer, it's bad on your nerves I think. I'm guilty of it occasionally too though.

@datsunrotten9477 Жыл бұрын

You had me at that beautiful intro where you throwing everything off that bench for the boost pump piece of crap ...it thanks

@user-tv4lz5ie5u Жыл бұрын

Came for the AR, stayed for the soundtrack

@WILSON-SN Жыл бұрын

PODERIA ME INFORMAR A ESPESSURA E O COMPRIMENTO DA BARRA

@JustFun-iz9rf Жыл бұрын

Wow clever

@Tonymontanayayo Жыл бұрын

This is a true craftsman milling out a lower receiver…. I’m one of those that use a jig (basically a template), and while there is a sense of “accomplishment”…. Doing it without a template is definitely a step above.

@404SRT Жыл бұрын

What kind of milling machine do you have ? This is a really neat project cool stuff man

@DiehlDoes Жыл бұрын

Bridgeport

@reinaldohidraulicosrey8176 2 жыл бұрын

Como cambiar los sellos del eje que va al pedal de frenos

@OtayBuckwheat 2 жыл бұрын

It makes the job less intimidating when you see it done. Thanks!

@lorinkenfield6937 2 жыл бұрын

Very informative and quick. Looks like you are well versed on the subject at hand.

@Harry-iz5hv 2 жыл бұрын

Gost gun, nice😋😋

@joeshumo9457 2 жыл бұрын

Guess some folks idea of clean, a rebuild, or a rubber mallet are different than others. When he put the pushrod in before putting it back together again I knew he didn’t have a clue to how these things function.

@DiehlDoes 2 жыл бұрын

That's why it's been working ever since I did this video 🙄🤪

@danielmarkle8823 Жыл бұрын

@@DiehlDoes Lol well that'll show'em...... sometimes there is another way to skin that cat as they say..... ( what a weird saying now that I think about it... )

@eviljew8206 2 жыл бұрын

@jankycia7693 2 жыл бұрын

you can hear that the spindle bearings are shot

@jankycia7693 2 жыл бұрын

how to take off and on properly? I lock the spindle with the spindle lock, then I use an adjustable wrench to grip one of the jaws to screw the chuck off. the chuck should be screwed in the direction so that your cutting tool, when in use, is trying to tighten the chuck. it should not take much force at all but I worry if that is hard on the jaw.. for reinstalling, make sure there is not metal particles on contact surfaces, surfaces should be very lightly oiled. I just turn on hand tight. I do not turn the pin. it is set to a proper depth and that's it....remember to disengage spindle lock.

@samroesch Жыл бұрын

This ain’t a threaded spindle

@melchvanleeuwen2166 2 жыл бұрын

What a music

@cliffmeister2000 2 жыл бұрын

I have just acquired the same lathe with the same switch problem. I assumed you replaced the switch. Did you find a replacement or make modifications to fit a switch, or go to and inline switch?

@gracefulgoon3190 2 жыл бұрын

Anyone have your brake pedal move when you turn the steering whee after doing this job?

@FarmallFanatic 2 жыл бұрын

Red Power

@ToJoseGarcia 2 жыл бұрын

Fixed mine for the price of o-rings! Quick tip: break loose the bolts while it's still installed.

@callingallbears 2 жыл бұрын

Maybe I’m being blind but I don’t see the link to the eBay store

@craigswartzentruber8895 2 жыл бұрын

I really wonder if it functioned after you were finished.

@DiehlDoes 2 жыл бұрын

Had 35k miles put on it no problem

@devemch7851 2 жыл бұрын

What a killer video. Bah humbug to the wet nellys. Would rather listen to you tunes than a blow by blow description of how to use a wrench. If you need that, then you shouldn’t be watching lathe redo vids. I am here to watch the lathe. Yah it’s not as accurate as the horse head but at least it was saved from the scraper.

@devemch7851 2 жыл бұрын

Just subscribed. It’s free and helps folks out…. Even those with horse heads like you;) P.S. For those who don’t know, a horse head was one version of the HLV. They have a more humped head stock.

@Aceofwingsify 2 жыл бұрын

No Fucking link

@DiehlDoes 2 жыл бұрын

It wasn't worth linking. The kit was shit

@Aceofwingsify 2 жыл бұрын

@@DiehlDoes sorry to hear. Ill buy you a coffee the next time you are driving thru connecticut

@ChristopherJones16 2 жыл бұрын

@@DiehlDoes the CNC kit was shit? Are all CNC conversions using Belt/pulleys? I always thought they used motors and couplings connected directly to the ball screw.

@DiehlDoes 2 жыл бұрын

@@ChristopherJones16 most are a belt/pulley design to gain spindle rpm

@dunnoyolo2238 2 жыл бұрын

Mine seems to be leaking inside of cab around the pushrod is their seal replacement for it in kit ? Thats just engine oil in it ?

@ronniephipps6555 Жыл бұрын

No there's power steering fluid in it comes from the power steering pump

@dillonchamberlain 3 жыл бұрын

Really beautiful

@ficknoti 3 жыл бұрын

If all these repair kits say does not work with steak rod how do I know if my boost has a steak rod?

@TonyM132 3 жыл бұрын

If I was running that Binder at the beginning, I'd stop for a bit to let the Deere get farther ahead so I was eating his dust. Either that or speed up a little and pass him for pride and glory... even though they're not even harvesting the same crop. 1460 oughta be able to move right along with a 4 row head, as it does later in the video.

@CTod 3 жыл бұрын

If you want a consistent z depth you can always face the part first, and I can’t really tell because it’s sped up but I would say your travel still looks a little fast for that end mill. Anyways, great video I found your dry humor pretty funny dude. You have a link to that kit! Didn’t see it in the description. Thanks.

@alastairgmills 3 жыл бұрын

who make and sells the rebuild kit and what is the manufacture and part number of the kit?

@ronniephipps6555 Жыл бұрын

Go to boost auto they have a video an link. Google boost auto parts I got mine for 20 dollars for the 2 seals u need

@manuelfranco4566 3 жыл бұрын

How many rounds have you shot through this weapon?

@dikhed1639 3 жыл бұрын

what kind of lathe are you using?

@DiehlDoes 3 жыл бұрын

Hardings HLV

@damxgopak457 3 жыл бұрын

Great info but if you take on this job be sure to pull everything apart and thoroughly clean it all then clean your hands then reassemble using only clean fluid to lube seals crud will cut the service life of your new seals among other things drastically.it sucks but you'll be glad you did.

@stevehensley5096 3 жыл бұрын

That looks like my work bench.

@dewlaw56 3 жыл бұрын

Where is the link to the kit?

@EZ-PZ-ECM 3 жыл бұрын

I have a white come with a tiny hole in the middle.... where does that go

@jtreg 3 жыл бұрын

This video would be so much better without the god awful music. Really.

Ең жақсы KZbin

Пікірлер