I didn't do much R&D on this compared to other standard dynamic mic elements,but still many considers this as good source of mic elements. Do keep in touch, thanks for sharing your thoughts.

Frequency Response will never be flat Voltage wise,this is why these works best for certain voice range! Don't expect to pickup every sound source,music and vocal at same level of Voltage output! Still considered good source as vocal microphone!

Sure I have ready stocks of these. Please contact me at [email protected]

Thank you Sir for appreciating. Keep in touch. 73s

Thank You appreciating ☺️

Greetings from India, I am Ham Radio Operator by hobby and an electronic hobbyist too,so collected few multimeter and test meters without much deep knowhow. You can mail me at [email protected] and I shall send you instructions manual for this. Otherwise don't have any more information. Do keep in touch. Best regards

Hi, Sorry for late answer. You can get many downloads from this link : www.remtronix.com/digital-radio/discontinued/dj-md5/ Try to find out other versions of DJMD5 here. All the Best!

This is my personal use only,there isn't any spares available for this here. I do feel sad for your meter not working. Wish I could help. I can repair your LCD if it had darkened,I did repaired mine too. But it is too tiresome process. For other reasons I may not be able to repair but if LCD display darkening issue then it is possible . Best regards

@hamradio_VU2SYD Il mio ha il display guasto e non si trova in commercio tu ne hai uno a disposizione che io posso acquistare?

Il mio è completamente rotto

To my knowledge only 1

Only 1 radio to one mmdvm

Hi, The radio already have full frequency Band in VHF-UHF and broadcast band FM-Receiver. Further beyond to this isn't possible. If some frequency are locked,those can be unlocked but something which isn't there can't be created. But still this radio has enough features and frequency range compared to its lowest price range. Nice radio. Keep in touch and you are most welcome to visit here again.

@@hamradio_VU2SYD In the 2-meter band, my version only has 144-146 MHz, although on the seller website it is advertised as an 136-174 MHz radio. Same in the 70 cm band. I want to extend the band to the advertised range, nothing more.

Absolutely not! What is provided is enough for its promised VSWR LESS THAN 1.5:1 . This is why Diamond CP6S users gets benefit from difficulties of installing extra multiple radials, ground system or antenna impedance matching units.

Only RX in non ham frequencies.

Thanks

Dear Chandan, Thanks for Visiting this channel and sharing your feedback. Yes it is really a good one for Multiband operation . It having it's tuned radials makes it useful for portable location if one can take little trouble installing it . Being vertical antenna it will perform best for DX stations!

Diamond BU50A Balun with 2 nos. Of insulators Price Rs.4,950(including GST).

Your price is too high. Sanchar Telesystems selling this item @₹3100 (tax + courier inclusive)

@sompurnagupta3846 mine has insulators with the BU50A balun and Paracord. Still Sanchar price for only balun is still good. I don't have only balun option.

@@hamradio_VU2SYD What type of paracord and insulators you provide? Could you please provide photo.

@sompurnagupta3846 I couldn't get any option of Sharing photos here. Can you please send me your email address or whatsapp so that I can share photos of the Paracord +insulators

Yes mostly Alinco and Anytone has similar looks and features in many models, such things are very common in other brands and accessories too. Like Many power supply from Diamond, Nissei, Alinco are lookalike! Many antennas of Diamond, Icom are lookalike too. Ha Ha Ha 😂

73s

Hi, I never came across any software for Icom IC-R10, I don't have software. But I do have programming cable. If I ever come across it's software will definitely share details with you. Best regards

@@hamradio_VU2SYD thank you

@aslamshiekh3058 welcome 🙏🏼

Dear YG3CFC, Greetings from India 🇮🇳 Nice to know you are having this compact base. Compact yet power packed 60watt radio! Love its sleeker construction. Remembering the function keys may be difficult in the beginning but it's not much difficult. Thanks for your feedback here. Do keep in touch. 73s Sunil VU2SYD Qth Kolkata, Eastern part of India.

@@hamradio_VU2SYD yes that's right. I have a little difficulty remembering the menu on the function. but it becomes easy when i get used to it. i think there is 1 weakness of this device : the manual offset number setting by pressing up/down button for duplex dial. Best regards from east of java, indonesia 🇮🇩

@adeliaseptiana3666 Pleasure meeting you here 😊. I am radio dealer here ,dealing in Yaesu, Alinco, Icom, Diamond, Nissei brand products . And have been in ham radio since 2003,and started hobby as a homebrewer. And find Alinco has manufactured Many good radios,amongst them some I like are DJG7T, DJX11E, DR735T, DXSR8E, DJMD5XEG,DR135TMKIII. Sadly some are not available 😢. Do come and meet here whenever you feel like. 73s VU2SYD

Thank you. 😊

Greetings from India. Thanks for sharing this info. I had no idea for this, I will share this with some other users too. I am a dealer and Ham radio hobbyist too, I come across many Receivers but have very little opportunity to try out all features. Glad you visited my channel and for sharing your views. You are most welcome to visit here again. 😊

Legal limit is 4watt

Hi, Greetings from India 🇮🇳 I have checked it inside and outside, on outside there isn't any voltage settings to change and neither from inside. At bottom the marking is 200-264VAC/50Hz. Inside there are marking like 110,220v, 13v are there on PCB,not sure how it is possible, may be adding some sliding switch along with some other components add or subtract on main board, not sure of any modifications. But outside no physical switch to change voltage settings.if you want I can send you internal photos. Thanks for your Visit, do visit again. Regards

Thank you for appreciating. I am very happy to meet you here. Do visit again. 73s SYD

Hi, These radio models are going out of production gradually,sadly I didn't get chance to study the G29,and regarding the G7,now I couldn't get this month as I needed some. If I get some chance I will definitely try adding one G29 too. Thanks for your feedback here. You are most welcome to visit here anytime. Regards

Will try someday. Keep in touch. Can contact me directly for more information for this product too.i will try to you answer immediately.

I am dealing in this model. These are old stocks,all in new condition, full working. The model you see may had been renamed by the brand from OEM. Punwire is Indian brand but this radio is similar to Dirland 3303 and seems to be made by HWA YUNG HYGEN Brand ! I am from Kolkata, India. I am dealer for wireless communication equipments here.

@@hamradio_VU2SYD thank you for the information. I always look for cb radios from around the world that are not avalible here in the US. Not sure if the frequency range will be the same per channel if it is India based radio.

@chriskilga97

@chriskilga9708 if you send me email address I can share the frequency chart with you.

Frequency 26 964 MHz 26 972 MHz 26 980 MHz 26 988 MHz 26 996 MHz 27 004 MHZ 27 012 MHZ 27 020 MHz 27 028 MHz 27 036 MHz 27 044 MHz 27 052 MHZ 27 060 MHz 27 068 MHz 27 076 MHz 27 084 MHz 27 092 MHz 27 100 MHz 27 108 MHz 27 116MHz 27 124 MHz 27 132 MHz 27 140 MHZ 27 148 MHz 27 156 MHz 27 164 MHz 27 172 MHz 27 180 MHz 27 188 MHz 27 196 MHz 27 204 MHz 27 212 MHz 27 220 MHZ 27 228 MHz 27 236 MHz 27 244 MHz 27 252 MHz 27 260 MHz 27 268 MHz 27 276 MHz

I don't have 410 so can't compare with Max 10. Max 10 is an excellent meter. Fluke is a good one. And brands like Meco,Metravi, Uni-t has many multimeters those are as good as Fluke. I am very comfortable with any standard meter,not necessary it has to be a Fluke. I always look into meter inside construction and compare few parameters with my trusted meters before relying on a new purchase. I find most of Metravi, Uni-t, Rishabh and few others I have are too good .Rishabh 13S I love its inside built and rugged looks. Equally same I feel for Uni-t UT195E and CEM DT9927T. My all time LCR favorite is Caddo 9304.

​@@hamradio_VU2SYDSir I want very accurate reading from the multimeter and my budget is within 3000 so which one should I buy and I liked owon's multimeter and I want a quality product. Zoyi company has a lot of features but it is Chinese

Pehle to Rishabh RISH Max 10 ek multimeter hey LCR nehi. Sirf LCR meter inductor ko measure karta hey. Fluke 101 nehi hey mere pass .so Rishabh ko compare karna possible nehi. Budget Agar Rs.2500 ke aaspaas hey to mey apko Metravi 19 series ka meter recommend karuga. Aur LCR k liye mey Caddo 9304 recommend karta hu,but ye kaafi expensive hota hey. Aap sirf Rs.1000 ka budget mey ek component Tester le kar use kijiye as LCR meter. Ye apke liye best hoga. Ab kuch China brand bhi Acha meter Bana raha hey. Jeysa FNIRSI DMT-99, ya Sunshine Relife DT01, etc,ye sab accurate bhi hey.

@@hamradio_VU2SYD Sir I have Rishabh Max 10 2550, now it is a copy, I don't know if it is original

I think you have original one. If you need more photos of meter I have can share more photos for you. At least if it is giving you standard results then be happy with it. Otherwise if I ever open meter inside will share photos which you can compare with yours.

Price Rs.7500+shipping.

Hi, Sounds interesting, let me check your info. Can't say who is OEM,or who is making clone as I am not manufacturing. But as you pointed out,let's check the details you had sent. Thanks for Visiting my channel. Try to visit again,thank you.

I had always done things in a hurry and less planning, your suggestions are really how it should be. Will follow your guidelines in next videos. Thanks a lot.

Life is a learning curve, it is never too late to learn at any age from friend or foe Child or grown ups.keep it up.

@mushtaqobaray7529 I do 👍 agree.

Hi, I will definitely add this data to description after sometime. Thanks for your feedback and suggestion. Thanks and regards 😊

Dear Metravi Team, I'm beyond thrilled to receive your message and grateful for your kind words about my collection of Metravi multimeters! It truly means a lot to me that you took the time to appreciate my passion for your brand. I'm absolutely delighted to hear that you consider my collection to be among the best - it's a testament to the quality and excellence of Metravi products! Your appreciation has not only made my day but has also sparked an exciting wish within me - I would love to explore potential opportunities to collaborate or deal with Metravi multimeters in the future! I believe that your products align perfectly with my values and the interests of my audience. I am wireless communication equipments dealer,and a ham radio hobbyist too,and find Metravi brand most trustworthy as per perfection and quality standard. I wish I could get an opportunity to deal in your products in future . Thank you once again for your kind words and consideration. I'm eager to hear from you soon! Best regards, Sunil Das

Hi, Greetings from India . Thanks for appreciating . Please visit again 🙏🏼

Dear Sir, I am dealing in wireless communication equipments and electronic spares / accessories. You can send your email ID and I shall send you all details of our latest Takumi soldering iron,accessories/ spare list. I have many types of Takumi products, all genuine, including fan,power supply, electronics components, Fuse,soldering iron, bits,desoldering pump, any many more.my location is Kolkata.

Loved to share all these with you ,don't worry try collecting few gradually.it took many years for me to build my collection. So many at a time won't be useful and practical. But still the craziness for electronics hobby, gadgets are an important part,so collecting these gives an immense pleasure. Try collecting, wish you all the best, even 3-4 quality items will give you full satisfaction. 😊 Thanks for contacting me. You are most welcome to visit here next time.

The 19 series are so far best and reasonable priced. The old 19 series only has 30 mhz but new 19-SUPER model has reduced to 10MHz only. There are certain Uni-t models that has even 400MHz ! 400! Nowadays many meters has 10MHz as standard but higher ones are selected few only. If you need i can arrange 30 and 400mhz ones.

@@hamradio_VU2SYD Thanks for your good information, appreciate all, I have a UNI T UT61E 220 MHZ multimeter. Beyond certain frequency range they require greater Rf input voltage to count that frequency. Requires a VHF UHF amp module. I have this module in hand in case required.

@mushtaqobaray7529 wow! Appreciate your efforts in experimenting with this multimeter,nice!

Hi, I am ham radio operator by hobby,and an DIY electronic hobbyist too. It is my likeness of keep collecting meters and can describe it as,you may find collection of cameras with one having photography hobbyist,where one camera would had been enough. I find each meter to have some uniqueness different from others,hence I keep looking for another one. Thanks for Visiting my channel and pleasure meeting you here. Regards

@@hamradio_VU2SYD Enjoy your hobby.nice to have collectors enthusiasts, they make a vibrant society around us. God bless. Keep on doing that makes you happy.

Hi, I would gladly help you get the manual if it is with me. Can you please let me know which one you meant?

@@hamradio_VU2SYD the metravi cataloug showed in the video at the background

Dear CPO, Nice to meet you here. As I am a dealer for these,I will be happy to arrange these for you. I have present stock of Alinco DRMD520E base and Alinco DJMD5XEG handheld. What you are asking like version T in base,and nowadays the E version has all functions of T,but only 220MHz is not there,else you will find all features of T including cross Band Repeater, Airband receiver,GPS APRS, dual RX,etc. Regarding XLT,Here only Version XEG I had been dealing.i cam try the XLT for you. Please contact me next week any time. 73s Sunil VU2SYD QTH: Kolkata.

Will try to reply you exactly what may be suitable for you, will Try to short list few models. There is a digital multimeter, which I prefer a lot,it is Metravi 19,it may not have everything, but 19 series meters are being made by Metravi for a long time,they I believe had updated the outer design many times,I had used a variety of 19 series of multimeters. I happen to have 3 different of the 19 series, like 19,another 19 with added NCV,and the third is called 19 Super. Another Meter which I like a lot,it is RISH multi 13S.Simply love ❤️ this one. It has locking features blocking banana ports which are not supposed to be used! It is Indian make,but looking at circuit makes me guess it can be German make may be,some tie up. Anyway please wait will try to shortlist few more soon. Best regards

@@hamradio_VU2SYD Thanks 73

Thanks for your feedback 😀 👍

Greetings from India. Thank you for appreciating. Please do visit here again. 🙏🏼

Hi, Thanks for appreciating. Actually the Cokin frame I used was very easy to attach with these mobile brackets. Anyone do this modification easily. Next will try with mounting round filters. Keep in touch. Thank you for Visiting my channel.

Hi This is TX antenna for frequencies 95-1100 mhz and equally RX for same frequencies and also as random length antenna it is good as HF frequency RX antenna. But it can't be used as TX for HF band!only RX with compromise of reception sensitivity! But still worth having it for sake of portability.