Thanks so much for this… I was loosing my mind trying to figure out why the lock was turning backwards lol
@Okan9311 сағат бұрын
Could you type out the app name you’re using.
@JessieSchutters-k3d21 сағат бұрын
Thanks for the great video!
@umutsr.74362 күн бұрын
Hi, I bought Yale lock with access modul. I want to know that must I bought Yale Connect Wifi Bridge too.
@АлексейКапитан-ч1й2 күн бұрын
Спасибо! Все получилось! 🙂
@Gabriyg3 күн бұрын
How can i control 2 different brand devices (samsung and mitsubishi) with the same esp32 not using the raw signals?
@avishakpaul29955 күн бұрын
Hi, i have Kaadaas K9 model but the push handle has become very lose and wobble, wondering if there is any screw to tighten? Thanks
@thewindowsmasterspro5 күн бұрын
Hi Friend, excellent video, I must say friend that I am in a similar project but when I make contact with the water it does not work for me and I am making the code in Arduino, for a pin bag 5v And when I make contact with GND it detects me but out of the water, when I put it in the water, it doesn't work for me, will you know what it could be?
@sudhanshugupta54717 күн бұрын
how to solve battery drain issue my front panel is working through 9 volt battary but back panel is not working after putting new battary
@vanderleisilvasantos534312 күн бұрын
hi how much per month, do you have a local version?
@giannisalvia467117 күн бұрын
hi, how can I use a binary sensor (button installed on the d1 mini) to control the pages on the display?
@ucnhtmenow126 күн бұрын
Why dont people just read the dang instructions.... 🤷🏽♂️
@HiwindersАй бұрын
Integration no longer works.
@877cmsАй бұрын
Very simple and I got it working - thank you! Would like a video on the authorized keys if you ever want to :)
@johannamit4388Ай бұрын
Your videos are very helpful, thank you
@johannamit4388Ай бұрын
Very good, thank you.
@onursahin9205Ай бұрын
Dear Kian; thank you. I have 3 pcs Yale YDM3168 with Zwave modules. I was using them with Zipato. Then they bankrupted. I want to use YDM3168 , they are very good locks. I will use it for change pins open/close only. Watching you since so many time. Vera also dead. What to use ?
@kian.smarthomeАй бұрын
Thank you for your comment. As far as I know, vera is not dead, it is changed to ezlo and you can use ezlo plus or ezlo atom.
@MrDudeficationАй бұрын
You can also install the local Home Assistant SSH instance and does not need an extra application. In addition, it is not necessary to use SCP for many things, for GitHub files it is easiest with Wget and the RAW link from GitHub
@ahmedelsafy8591Ай бұрын
The code file in the description does not match the one I used in the video. Where is the correct code used?
@kian.smarthomeАй бұрын
The one in description.
@MohamedAGaber-ur3zuАй бұрын
How I can add about 15 MCO home smart switches to the controller after this steps at this video
@kian.smarthomeАй бұрын
One by one add devices then change their names in order not to lose them or let's say be xonfusex
@MohamedAGaber-ur3zuАй бұрын
Kian help me please. how I can direct contact you?
@kian.smarthomeАй бұрын
Sorry, I have been so busy that I coukdn't check youtube. Please ask your question here.
@RND-USAАй бұрын
Great video, thank you! Dumb question: how does the circuit connect to the fan though? What kind of fan is it connected to ?
@RND-USAАй бұрын
Oh I think maybe I see now, you have a video for triggering a relay. I’ll try to figure out how the two systems are combined on one esp.
@kian.smarthomeАй бұрын
Thank you for your comment. Yez, by watxhing that video you can control any fan
@Vrykaanthony27Ай бұрын
HI
@kian.smarthomeАй бұрын
Hi,
@VibesCureАй бұрын
I have and esp32 i was uploading code on it when my pc suddenly turned off now it is not uploading code it says failed to connect and even in the web flasher it is not connecting but it is turning on. Can you please tell me how to fix it?
@kian.smarthomeАй бұрын
Try uploading an empty sketch on it by using Arduino. If it fails your board is damaged.
@kian.smarthomeАй бұрын
To find how to do it, search reset heltec boards on my channel
@VibesCureАй бұрын
@@kian.smarthome not working, i think it is damaged as when i plug it in the esp 32 ic heats very much,so much that you cant even touch it,but it turns on,the light shows
@gotland80Ай бұрын
Good!
@kian.smarthomeАй бұрын
Thank you! Cheers!
@aguaxv2845Ай бұрын
Como se puede hacer para que prenda una luz simplemente cuando esté bajo el nivel de agua ???? Saludos
@kian.smarthomeАй бұрын
With different boards or on the same esp?
@qadeer1685Ай бұрын
Nice
@kian.smarthomeАй бұрын
Thanks❤️❤️
@jjpp1970Ай бұрын
Hi Kian, I wonder whether you can explain me how I can update firmware under developer mode. Current firmware is 3.3.0, it was updated before setting Developer Mode. I know recently Sonoff has released firmware 3.4.0. However, update availability does not appear on the setting of the device. Thank you.
@kian.smarthomeАй бұрын
There must be no issue, try changing your internet or maybe a recovery process may help. There is a video about recovering NS panel pro
@RixtronixLABАй бұрын
Creative video, thanks :)
@kian.smarthomeАй бұрын
Glad you liked it!❤️❤️
@BertinS2000Ай бұрын
The Alexa Web Interface its Gone, how can we extract those cookies now?
@kian.smarthomeАй бұрын
Sorry, I have no idea and no it's not worth working on it
@BertinS2000Ай бұрын
@@kian.smarthome ok, thanks Kian
@aaronmontgomery8059Ай бұрын
Is there a way to allow this to communicate vs. Zigbee?
@kian.smarthomeАй бұрын
What exactly you want to do?
@carlospalomino5749Ай бұрын
Como cambio idioma xq esta en ingles
@kian.smarthomeАй бұрын
Acess into master mode the enter 2, enter 2, then listen to items and select it.
@andre-le-bone-aparte2 ай бұрын
Just found your channel. Excellent Content - another sub for you sir!
@kian.smarthomeАй бұрын
Welcome aboard!
@manamkami2 ай бұрын
Interesting. Any link to the product?
@kian.smarthomeАй бұрын
There are many items in the market, may I know where you live?
@ayy2342 ай бұрын
Thank you AliReza you rock
@kian.smarthomeАй бұрын
You're welcome, thank you for your kind word
@Nefrytusful2 ай бұрын
Hi there and how to correct display contrast? I have 10k potentiometer where should i co net it? One leg to V0 but what with two next? 😁 I can see letters from angle but no straight.
@kian.smarthome2 ай бұрын
Good question, In this video it is shown: kzbin.info/www/bejne/Z4OboJ55jpZ0edUsi=DHO9noV39t7cwhFF
@Nefrytusful2 ай бұрын
Cool so i Just have to connect ground to one leg. One more question :). When I adjust contrast and remove potentiometer it will remember contrast or reset to basic?
@FernandoRamirez-hf7pj2 ай бұрын
spent lots of time reviewing the manual and combing thru the Schlage website. There is no mention in the manual on how to switch from left to right hand rotation. Your video is great, thank you for posting.
@kian.smarthome2 ай бұрын
You're so welcome and I am so glad this video helped you.
@olatunbosundare60732 ай бұрын
This video saved me! Thanks a lot
@kian.smarthome2 ай бұрын
I am so glad this video is so useful.
@milanese2322 ай бұрын
Thanks for sharing
@kian.smarthome2 ай бұрын
You are welcome 🙏🙏🙏
@mohitkapur89192 ай бұрын
Did anyone try this on Vera Lite?
@kian.smarthome2 ай бұрын
Is it UI7?
@DGDG00000002 ай бұрын
wahou, thank you for that information. Good video done !
@kian.smarthome2 ай бұрын
I am so glad about your feedback 🤩🤩
@DGDG00000002 ай бұрын
thank you for sharring your experience.
@kian.smarthome2 ай бұрын
You're so welcome🤩🤩😍😍
@ammar15282 ай бұрын
Can i use ORVIBO ZigBee Smart Hub to connect tyua zigbee switch ?
@kian.smarthome2 ай бұрын
No
@lukaszheymann90872 ай бұрын
Hi. Is there Android system?
@kian.smarthome2 ай бұрын
Yes
@pooyaz95372 ай бұрын
So amazing and useful
@kian.smarthome2 ай бұрын
Glad you think so!
@Giwrgos_T2 ай бұрын
ok i found something.. i added a binary sensor to do that so.. its just need some improvements i think
@kian.smarthome2 ай бұрын
great. please share your code with us.
@Giwrgos_T2 ай бұрын
Yes ok i receive this data and i see them in logs from my samnsung ir remote.. but how i can use these received data in logs to control something connected to home assistant?
@kian.smarthome2 ай бұрын
You did it yourself, please elaborate what you wanted to do and how you did it, please.
@Giwrgos_T2 ай бұрын
@@kian.smarthome I wanted to bind some of ir remote keys to trigger some devices in home assistant.. So i used this code: binary_sensor: - platform: remote_receiver name: "PC Shutdown" samsung: data: 0xE0E040BF nbits: 32 - platform: remote_receiver name: "light" samsung: data: 0xE0E020DF nbits: 32 under remote_receiver: i put this code while for data i use the logs to capture the data signal code and put it back to the code above
@Giwrgos_T2 ай бұрын
@@kian.smarthome remote_receiver: pin: number: 32 inverted: True dump: samsung binary_sensor: - platform: remote_receiver name: "power on button" samsung: data: 0xE0E040BF nbits: 32 - platform: remote_receiver name: "source button" samsung: data: 0xE0E020DF nbits: 32 - platform: remote_receiver name: "volume + button " samsung: data: 0xE0E0A05F nbits: 32 here is the code.. i captured data of button presses in logs for each button you want to add you follow the same process..
@Giwrgos_T2 ай бұрын
@@kian.smarthome as project i wanted to press a button on ir remote contoller to control some devices binded to home assistant so if i want to turn on a light by using ir controller i can do it from now on
@Giwrgos_T2 ай бұрын
can you receive a signal from an ir controller button to activate a light switch for example with this setup? I didnt understand it well.. I need to use an old ir remote to control wifi devices through home assistant.
@kian.smarthomeАй бұрын
Yes, create scene or let's say event. There is a tutorial video on channel
@zwirn002 ай бұрын
I need the device for steering the TV of grandma, she is not able to do it herself no more. Does it work, when I’m not in the network (WiFi)? What do I have to do?
@kian.smarthome2 ай бұрын
about the first question tell me why isn't mentioned TV able to do it anymore? About the second question, when the broadlink is connected to the Internet you can control your devices using your phone when your phone is connected to the Internet but not nesseccary to the same network.