Hey there, You can't install these lights without removing the factory side markers. The harness should be attached to them. If not that is an issue with your vehicle and you need to contact your dealer to see why they did not have rear side markers as that would be not road legal as well and a production issue. The harnesses have to be there. As far as the side markers being blank I am not sure what you mean,

This is not something we have seen before. I will recommend that you reach out to customer service and they will be able to help you work through all of this or potentially send out a new set. This is not something I am familiar with so I have passed your name along so they know to lookout for your message.

We have tested on the GT and did not find this issue initially. I am not sure why the speaker system would change the tail light connectors but I will have you reach out to our customer service team and they will gladly help resolve this issue for you. I have also mentioned the fitment issue to our engineering team so we can look into this further.

The headlight shape of the premium trims are totally different so theses will not fit.

No because they headlight housings are totally different. We do offer an upgraded 4th Gen headlight option that is compatible though.

I am not sure, but why would you need to leave them disconnected? The install is even easier than removing them you should be able to just swap them out right away.

@formlighting because my country does not allow those lights being on while participating on the public roads.

@@ZoubeirsWorld I am not sure then. Our products are USDM spec and having active side markers are a requirement here to maintain road legality. I am not able to speak to the vehicle warnings you may get for leaving them unplugged but I am not sure why your vehicle would have them to begin with if that is illegal. Please let me know what you find out there as I curious and not sure how to help.

@@formlighting Because the police does not enforce on this matter. Unplugging them is only to pass the test to get the car clear to be road legal. But it can only pass when there are no warning lights on the dash.

@@ZoubeirsWorld That is not something we are able to advise on you would have to just unplug and test it yourself unfortunately.

Hey there. This is incorrect. Sorry to hear you are having trouble. The vehicle in this video is a 2011 Tundra and we install them directly with no modification. The adapter harness we include is not required for the Tundra and it is show here as well our written instructions. If you used it that is why you are having issues and you should remove the adapter all together as that is for the sequoia not the 2011 Tundra.

@ my brother help me and told me I don’t need adapter. Thank you, will give 5 stars.

Not just yet! Stay on the lookout for future announcements regarding official releases.

It is updated week to week. About a month ago when we released them it said 6-8weeks. We are still on track to ship out the lamps as advertised.

We sell them on our website!

These will not fit the pre- facelift models unfortunately. The headlight housing is a totally different shape so they don't mount up. The tail lights we offer are compatible with all trims though!

They are compatible with all trims, and all the adapters needed come with the headlight. Your model should not need any adapters though since it has LED lights from the factory.

🤝🤝🤝

It's working fine for us. Are you still having trouble?

Good news is they are on sale right now! Go save some cash and upgrade those headlights at the same time!

you can't, it's a little bummer.

@@yottooverland ugh dagger

@@yottooverland btw cant wait for my grille to arrive tomorrow.

Bro he literally said in the video

Ok​@@PatricutPatPat

Hey there! Sorry to hear you are having trouble! This is definitely only due to the dramatic temperatures at which you are washing the lamps. Small amounts of condensation are common and Ford has released articles about this for their factory lamps as well. If you notice large amounts of water pooling in the lamp or condensation building up causing water to run down the lenses this may be cause for concern, but other wise nothing to worry about as long as you allow them to vent in proper temperatures. If you are washing them in temperatures like this that are below freezing we don't have a 100% solution other than to just try to keep them warm long enough to let any amount of moisture properly vent before exposing them to freezing temperatures again. Once the condensation is frozen there is no way for our built in vents to help remove that added moisture.

@@formlighting Thanks for the reply!. Ya it is just misty type moisture and it is frozen unfortunately. If it gets worse I'll be sure to contact you. Other than that these lights rock. Much brighter than factory and they look amazing. Thanks again

the lenses are color, but the actual light portion has to stay red and orange to maintain DOT compliance. It would be illegal to change the actual color of the lights. When they are off the lense color is all you see.

You're going to love them!

Stay tuned for more details regarding official release!

We have a couple white Mustangs running the smoked and clear lamps. They look super clean!

@ appreciate the comment. I’ll go ahead and get them now.

Thanks!

Can't go wrong with the smoked or clears!

Sorry to hear you are having so much trouble with this. Aiming your headlights is standard procedure for all aftermarket headlight upgrades. It is impossible to accommodate for all ride heights out of the box, and that is why we have built-in aiming adjustment screws. You will not have to remove anything to properly aim the headlights. Simply turn the screws out or in to raise or lower the beam pattern. If the stair step pattern is what is causing concern this is also intentional so that you do not blind oncoming traffic. The driver-side output should be lower than the passenger. a As far as the safety sense feature goes the vehicle that we filmed this install on did not include it so it was not noted in this video and I will pass the suggestion along to our team to revise this.

We might have skipped them! I will pass the suggestion along to the team.

@formlighting please do

These are for the 07-13 models only.

​@@formlightinganything else like these for 14 rado?

Sorry to hear you are having trouble. I responded to your previous comment. I would recommend reaching out to customer service as they will gladly help walk you through this entire process to eliminate any confusion.

Hey there! Please contact our customer support team and they will be able to walk you through how to walk through the installation to properly enable this function. Hours: Monday-Friday 10 a.m. - 5 p.m. Email: [email protected] Phone: 314-205-3033

Hey there. This option is plug and play for all trim levels. No need to hire a shop to install. We include all the necessary adapters to bolt the lamp right up to your truck.

We have no official details to release at this time, but stay on the lookout for posts regarding any upcoming releases!

We already offer a set of Jeep tails. Head over to the website and check them out!

Maybeeeeeeee!