I just had a similar situation with the Rear Brakes. I have a 2018 with those same brakes on front & rear. I had it checked at my local Honda place about year ago & they measured the wear; 7mm front, 4mm rear. Im assuming they would measure the inner pads because those are supposed to wear out first. So a half a year later, I hear screeching & see one of my back rotor scraped up. When I pull the calipers off, the OUTER PAD WORE DOWN TO METAL. And in these cars the wear indicators on the inner pads only, because that supposed to hit the rotor first, then slide pins pull the outer. Something wasn't greased properly at factory causing uneven wear. I replaced rear pads & rotors myself, because the Honda dealer quoted me $700 for REAR ROTORS & PADS install !!! I replaced everything, pads, rotors, caliper pins, pin boots, etc. I bought a kit from amazon that screws in the rear piston, not just compress. All in for ~$200. But anyway, now im gonna be pro-active & change the front pads. The Rotors are damn near perfect, & car has ~45k Miles (or ~72km). By any chance, do you know if the front pads are Akebono ? And do you know why the outer front pad Sticks to the Caliper like that ? What's the purpose of that ? Does it help the outer pad retract properly ?

Lets say you buy the exact same door sill led, can you plug and play or do you have to actually remove the wiring for the new door sill?

What are the tire size

JDM engine zone sold be a 13b that had the oil level sensor completely smashed into the pan.

🔥🔥🔥🔥🔥🔥

I drop my like 👍, you deserved bro 😎 nice job, can u do it on my type R FK8 also?

No one is showing how to wire it

its beautiful

its a plastic barrier to keep water and air out

It's not getting good spark Boo

You are giving me some ideas for my Xgen

Love the idea bro!

How many did you use ? 450?

Got a 2021 lx would it still fit ?

Though I was the only one that wanted to put the fogs on

Might be a dumb question Where did you plug the lights in for them to work 😭

Just pay someone to do it.. this shit took me about 12 hours to do. I wish I had took it to someone. It's hard af to make everything nice so that my sunroof would open. My sunroof doesn't slide clean no more😢

Where you from ? I’m stationed in Pensacola, FL so if you close I’d pay you to do it 🤔

Do you need instal also a on/ off switch for the lx or you can connect it whitout it

What’s the website

did u cut the positive wire and put it into the fuse tap adapter?

appreciate the video man thank you for teaching us

I need buy❤

Excess wire sorry I was trying to let it go no hate bro but is excess not access I may be wrong too thanks for the video

how did you get the headliner out? did it creas it?

Can you please make a video on how you hooked up the power for it.

How you do that ? I have a Honda accord 2020 LX and idk what mods to get

Where did you get power from tho ??

brother, where can I get the connectors that are in the bcm for the logo, what are they called, please tell me 🙏

Do your wheels rub when you make sharp turns?

I’m trying to reach you on instagram bro but I can’t find your account there I have an lx and want to install the fog lights that you have… let me know how I can reach you please

Plates in the oil pan are baffles to reduce oil aeration and keep the oil close to the pickup tube. For anyone watching this, do not apply silicone sealant like this video does. It is meant to be applied as a continuous bead on the lower oil pan flange surface. Factory surface manual specifies 2.5-6.5mm for the bead thickness.

Where did you connect the box?

Same install on an ex?

How much would you charge for install? Live in jersey also

Yo brother I also need to to change out my rotors and pads, I already have bought them. Can you tell me how much that shop charged you? What’s your ig?

How are you a mechanic? And allow you're brakes to go that low ? Why even go to the dealer if you are a mechanic? 🤔🤦🏻

Hi there 👋 I have a question about rotors, is it okay to install smaller brake rotors on my car (10th gen Honda accord) without changing the brake pads??

W panzoid intro

You’re skipping so many steps on what to use to take something out. Like the back side curtains ??? HOW

You never showed how you wired it up

How were you able to get the headliner out of the car if it’s so huge?

You don’t have to take out the Bumper to install the fog lights..!

how many stars do I have all that

love that idea , putting the door entrt light with the door sill light. I may need to use that method. .Thanks

Where did you connect power?

Turn the shitty music off in the background next time.

Nice video! I think you meant “conduit”, not “grommet” for the flexible ribbed hose you put the wires through.