28:54 😂 i know who you are talking about😂 I think some people get payed to make that stupid remarks.

Great video thanks 🫡

Good job 👍

eyes on road please...............eyes front always...................

Hello Jim. Thanks for this video! Do you know if this 3 spoke steeringwheel from the R56 also fit on a R50 Mini Cooper from 2006? Thanks in advanced!

Good video, but on my 2011 juke DCI it’s not in that location, where is it ?

Jim did you ever replace the differential pressure sensor tia

They still haven’t sorted out the alarm issue

Is this on petrol engines to ..getting so much carbon.

Film at 25 or 50 fps to avoid flickering screens and lighting.

Can’t you just use a long thin drill bit on your drill

Thanks Jim, I will try this weekend

Rear seats are 40-20-40, that middle part is separate from the two other seats.

Hi Jim, I have a 2015 1.5 DCI nissan Qashqai, there is a knocking nois when i accelerate and it idles very rough, can it be lifters or timing, i tested my injectors and they are fine, the knock is really loud when driving but there is no knocking when idling. Your advise will be highly appreciated.

That's the old model though..new MY25 been out a while now. Not sure why a dealer has old model in showroom in October 2024.

In answer to your question, when using B mode, yes the rear brake lights do indeed come on.

A honest and fare review.Just ordered this same megane and colour, still waiting for mine to arrive this month.Thanks Jim.

hi Jim I'm thinking of changing my ev6 and i am considering the megane or the scenic what's your thoughts.

well done jim good review i done a test drive in one myself its much more comfortable than my kia ev6

What the hell do you know about electric vehicles.. 🤔

How long is the pipe? I don't know if im hitting blockage or the end of the pipe

What’s the make and model of the drill you use at the start to move the fuel pressure sensor screw please ?

Looking forward too next video jim

Good too see your videos again jim

Parabens pelo video Jim . Es um grande comunicador. um grande abraço do Brazil !

Excellent stuff. Got through it quick enough thank god.

The Combo at the end is a pre-facelift, surprised you didn't recognise it as it's mostly identical to the one you reviewed. I drive one for work, and I like dat, I like dat alot. Would never buy Vauxhall but can't complain about it as a company vehicle

obviously your so called new shock were fitted before, it got marks near the bottom. it is a lot harder to fit a brand new unit.

This is the best tip I've ever seen on the internet for anything. I was able to fix my Juke following this guideline. I have to say it takes a little practice to get the length of cable and drill speed just right to avoid it knotting up or whirling too much. Took just over two hours. The pipe is just over 300mm long and the blockage was about 100mm long

Is that some fertilizer in your shed jim?

Why does it have JCW badge when its not a JCW?

Ive used autosmart G101 gives fast new like results or even petrol but must be dry before refitting

I have an 02 what 3 spoke years would be compatible thanks

Thank you for your video. We are visiting Ireland coming from Germany this year. Do you have recommendations, which charging cards are needed? Do you observe that the number of public chargers are growing over the years? To be honest I'm a bit worried to survice with my EV during my stay in Ireland.

Jim I have a 2014 1.5 qashqai .the red engine light comes on and the power goes down and then goes away and then back again .any clue what it could be ?

Very useful thanks jim

Can you not preheat the battery

Thank you for your videos on the Mini! I own an R53 as well but I’m in the United States and they put the drive on the opposite side of yours 😬. I am not sure if you’re still making videos but the ones you have posted are a treasure, I am a huge fan. Again, thank you, from across the pond. - Keith

Hello. great video. What is the reference of the airbag with two conector( Green and black )

Look up O'Riley on KZbin,he fixes this issue properly as in these videos hes only doing half a job, you need to apply dpf cleaning fluid via compression at 130psi & run the engine at 3000rpm whilst reading the dof pressure with a good obd reader, once the pressure is liw enough you need to reset the soot level in the dpf. O'rileys the soot doctor 👍

All nissan qashqai dci owners should be using C4 oil not c3 as shown here, less issues using c4👍

Beautiful and full of interesting infos ! Planning to do such a job next month on my r53 !

As I have the same issue with my Duster 1.5dci I ask myself if it is possible to blow this tight pipe with high pressure compressed air. What do you think would it free the pipe ? Or does it damage turbo or something else ?

Can you send me link for this dynamics lamp?

Hi Jim just wondering ? are you aware that there is another EGR valve on that car as well its known as the low pressure EGR valve these things give their problem also , it controls the flow of gases through the cooler , there is a screen and butterfly that get chocked up , so I would be cleaning that one also , cleaning one valve is only half doing the job , just for your information so that you wont get caught out with another problem later , Keep up the good work

Hi Jim some of these jobs are a bit of a pain in the butt , recently I had two of these cars in the workshop recently for the same problem as you , but the ones I got had been molested before i got them all the rest you understand , I had to remove Subframes DPF Turbo and manifolds to do the job properly , on both had to drill & re thread the Manifolds on both also had to replace the upstream temperature sensors these also had to be drilled out and rethreaded an tough job enough cause you cannot afford to damage the manifold and keep every thing original spec I don't believe in heli coils they can undue over time , so I also got the DPFs cleaned while doing the process and make sure everything worked properly so all done and every body happy

Hi Jim, regarding your other video on this engine with the blocked pressure pipe, I've cleaned it out with brake cable etc and I'm sure some snapped off! Will it hurt the engine? How hard is it to take the pipe off to try retrieve the wire? Cheers

First of all thank you Jim massively helped me out. Here’s how it went for me and what I’d recommend to others. Day 1. Followed Jim’s steps exactly. I was at it for about 3 hours but couldn’t get it clear at all. Brake cable kept wrapping around itself, getting stuck on the pipe bends etc. After reading some comments I realised that some qashqai’s have a slightly different pipe that has more bends in it. Mine happened to have more bends making the job harder! I tried some electrical cable to no avail. Day 1 and I gave up! Day 2 Bought some carb cleaner from screwfix for £5. Sprayed quite abit down the tube. Did away with the plastic outer of the brake cable and went directly into the pipe feeding it down. In and out multiple times, but still couldn’t break it clear. ***Top Tip which eventually solved the issue. ** - Force the brake cable down the tube as far as you’ve progressed. Snip the cable about 1 to 2 inch above where it comes out. Then attach the drill, turn and feed. Once there’s no more play. Take it out, spray more carb cleaner. Cut another bit of brake cable 1 to 2 inches bigger than your last and repeat process. Keep doing this and bingo! Will break clear and you can move the brake cable in and out freely. Turn the engine on and watch all that soot splurt out!! I hope this helps people and thanks again Jim. You’ve saved me £100’s but at the cost of my son’s brakes on his bike! 😂

Give up for christs sake.

Jim thank you so much for your videos! Life saver! Can I ask, do you know if a blocked/clogged EGR valve will cause juddering when the engine is under load - that's what I'm experiencing and I'm trying to diagose. My exhaust gas pressure pipe was blocked too, such a common fault. Thanks again