Hi there, big thanks for your help, I'm gonna try it now. Question, why do you only use 1 hybrid lens? Greetings!

I have used it for a couple of months and the screen is not so bright as you want it if it is sun outside so i am a bit dissapointed with that but overall it is a good device!

I reviewed the service manual and the both the diagram and instructions indicate that the rubber washer is to go between the up/down adjust bar and the boss that slides up and down in the 4 position track. It's not supposed to touch the windshield at all. So perhaps the factory is installing it incorrectly and why is it popping out of and around the head of the windshield installation screw. It doesn't go there! Unless the service manual is incorrect? I plan to visit my dealer tomorrow as see what they say.

Mr. Goat. Why this unit and not the Chigee?? Just curious as I have thought about getting a unit for my GSA but I’m not sure. I need a unit that is plug and play and works with the wonder wheel and fits into there BMW Navigator cradle

Thanks for the detailed review. I was toying with the idea to get a Carpuride unit, but I think I’ll stick with my WunderLINQ for the time being.

nice video , please advise how to connect the thunderbox to the battery , like which cable of the battery to remove first , what other precaution to take before disconnecting battery etc , appreciate any assistance

Hello GG, just watched your video on installing the motech engine bars, I’m having trouble fitting mine, I can’t seem to find a socket the right size to undo the bolt, that’s attached to the long bolt that you have to swap over, have got the T55 torx , I see in the video that you had trouble loosening this bolt also, can you elaborate please, great videos, regards, Peter.

Regarding the speedo over reading, i thought the exact same thing when i test rode both the 24 rally pro and gt pro. They read about 5mph over at 40mph, and similar all the way up! I checked my 23 STRS 765 with my phone and its very accurate in comparison, showing 1-2mph over at the most!

Thanks for this video. I was just about to buy the GoPro7 as an addition to my Insta360 ONE RS but I will now not do so - because of that microphone issue - what a ball-ache having that big unit on the camera. Great comparison- thanks again.

I've been struggling with this. Thank you!

What is the reason, not to remove the rubber boot?

Under hard braking my handlebar shakes front and back. What could be the issue?

When I bought my Yamaha Tracer 900GT, it had Dunlop tires on it. I did not feel confident on these tires. There was a handlebarshake. Taking curves did not feel good. My dealer told the story about the topbox. Shortly after a heavy wobble on the highway, I changed the tires with Bridgestone tires. ALL problems solved! No more Dunlop tires for me. Never ever. Op

You have a lot of things that I want to install on my tiger 202e; that i hope to receive it next thirsday after this message. , I´m very excited for my new bike; i´ll continue seeing your very usefull videos . Best Regards ,from Colombia.

Wishing your pain go away and you make longer trips 🙏

salute to you for riding in such a heat. My Tiger 900 has been sitting in the garage since I bought it due to Houston heat. Hoping the weather gets better soon so I can take it out :). Can you please put link for the back tank case you have put ?

No interest in this bike after watching this but subbed anyway, well made video.

What mic do you use? I have the purple panda, hopefully it's compatible

Okay Grumpy, understood and thanks much for responding. I recently got myself a 2020 RS with less than 10K miles. Thinking to either install the Healtech or EzCan for controlling front and rear lights. Trying to decide which of the two or perhaps as you indicated both....

Hello Grumpy! I only recently joint your channel and indeed enjoy your videos very much! Two questions in mind: 1) Why, for your Tiger, you chose EzCan over Denali's own product (albeit the two are essentially the same product)??? 2) Now that you installed the EzCan, are you still using the Healtech module for anything? If not, will you be removing it from your Tiger ??? Thanks much!!!!

I have the exact same issues as you. Same speed, same shimmy. My bike is a 2023 V-Strom 800DE. At 2,400 miles the rear tire was shot. I replaced both with new Shinko 804/805 knobbies (a tire I've run before on many different bikes). Unfortunately I also replaced the rear shock spring for a slightly stiffer spring at the same time. I now have the same handle bar shimmy as you. No amount of preload adjustment +/- has fixed it. The bike should have proper ride height, rider sag, etc. I have aluminum panniers but no top box. Increasing front tire pressure seemed to make the most difference. My problem must be related to: 1) the new tires or 2) incorrect geometry due to firmer rear shock spring. I may reinstall the OEM front tire today to see if the problem goes away. Thanks for the video.

Looks good! I plan to switch from the gopro soon.

Great review! I have never found a soap that was magical, where you dont have to agitate the surface with a cleaning towel. The only thing he didn't do, was per the S100 instructions, use high pressure rinsing. In my opinion, BMW bikes especially, using high pressure water is asking for trouble, it causes water intrusion into the drive assembly, switch gear, electronics, wire harness, relay switches, lighting connections, etc.

Have you done a video on fork oil change please?

Thank you

Do they have sloths? And can you hold them and take pictures ?

How did you come about to reset the service counter! Do you have access to a dealer login?

I can't understand a word of what she says.

Grumpy RC cruises from terminal 10

Hello. Can I use this one with dreamstation go cpap from Philips or with the sleepstyle cpap from Fisher & Paykel? Or I need to do some adaptions?

Post a video of final setup. Im installing the same, from the same place, on the same bike soon. D3 with the same color and EZCan too. But, I have Outback Motertek crash bars and will figure out where and how to the mount them. I'll get the Amazon mounts however after your video... I might get the B6 light too. Love to see yours on final vid too.

helpful

I want to add lights like this, but I dread that install haha

Great video. Do you have to 'lock' the tank in place, or can you slide it forward when riding, then slide it back to remove the key? Thanks.

Someone mentioned that the cable is for locking your helmet as well. But I don't know if the material is strong enough?

Next time you're in the garage, get out a 6 mm hex and a T-40 Torx and see which one fits the final drive fill plug better. I think it'll be the 6 mm hex. Right after I got my R1250RS a friend gave me a master list of torque values and fastener sizes for the BMW 1200/1250 R-bikes, and it says 6 mm hex for that little filler plug. No matter - I have all of your RS maintenance videos saved. Thank you for the clear and concise narration, good camera angles, etc.

Very detailed review. Saved me 80 EUR Thank you.

Simply adjust the shift lever.

my 1200RS has a broken "ear" the LHS part that holds the arm that lifts and lowers the screen...dealer is getting me a new one, but wonder if anyone else has had that problem...bike has only done 13k km

Thanks for breaking down the installation of the SW Motech bags, you did a great job and did it step by step, which was super helpful.Thank you!

Hello again did you find a solution to the pillion passengers legs fouling the grab handles.

I'm ordering the same soon. I already put the mini soundbomb horn on, and I have the Outback Motortek crash bars on, so I'll have to figure out the mounts yet. I'm getting same set up..was hoping for a sale or something LOL.

Watching the replay

I used a good quality mastic adhesive worked a treat . £10 works as it should for less than a certain branded item 👍

Great video! Thank you!

Great video. One point however, these are crush washers and they need to be replaced with every oil change. It’s not a huge deal if you reuse them but you might get a leak, I did even though I used a torque wrench. Now I replace them with every oil change. Cheers! Safe riding!

i noticed my new 2024 ninja 500 doing this today..

Could you tell much difference between the Rally n Rally pro? Thank you!

Awesome, I just ordered one. Will my Goldwing be able to recharge it while I'm riding ?

I have a 2021 Tiger 850 sport. I used dealertool to reset my service interval, and it worked perfectly. I use an old laptop for the program, which makes it convenient to use in the garage. One silly thing came up that I thought was a problem with dealertool until I realized what I had done. The service interval came back on, and I couldn't reset it with dealertool. The interval was correct, and the date for service was next year. After refreshing some brain cells with a beer, I realized I had recently disconnected the battery and threw the clock out of whack. It also threw the date out of wack, and for some reason the date became the service interval's date. Once I reset the clock and calendar, all was OK again. I suppose the bike makes the calendar date the same as the service interval date so you know you need to do something with the bike. Clever and stupid at the same time.