Looks like he aint answering any questions. Next...
@Kgio-21122 ай бұрын
Wear gloves
@bee23333 ай бұрын
What gpm is that pressure washer
@elterrible30674 ай бұрын
I’m sorry for you loss . I see no surfactant and he was using no protective gear . The skin is the largest body organ everything you do to it has an impact on your health, soaking it with bleach for years not a good thing.
@akbuilder762610 ай бұрын
Stand further away would ya.
@DaveTheRPAGuy Жыл бұрын
FYI for any commenters, Dad (Al) passed away last year on November 2nd, 2022. I plan to leave his videos up, but unfortunately I do not know what magical solution he was spraying on the wall. I never quite learned things about pressure washing as he did. =)
@freeagent6203 Жыл бұрын
whats the srobest mix you can get with an xjet?
@Hamrickshighpressuresolutions Жыл бұрын
Are you running straight sh
@SpaceMissile Жыл бұрын
_Dadgummit._
@justinoneill2837 Жыл бұрын
is that a modified XJET that you're using?
@DaveTheRPAGuy Жыл бұрын
Dad (Al) passed away on November 2nd, 2022. I dont know if that was a modified xjet or not, but it wouldnt surprise me. He was always making modifications that he wasn't supposed to so things would work better lol.
@andreamanning-iq3rq Жыл бұрын
Good job!
@ssplaya713 Жыл бұрын
Will it dilute without using proportioners and by how much?
@ssplaya713 Жыл бұрын
My machine is 2.5 gpm btw until I can upgrade
@emog7 Жыл бұрын
“You gotta put in an arrow, Al!” 😭
@SpaceMissile Жыл бұрын
dadgummit, Al...
@truthseeker5863 Жыл бұрын
How do you get your pressure washer to go up to a 2 story house I’m struggling I bought an extension wand but it’s a hassle to use and handle but I seen videos and y’all just pressure wash 2 stories homes with ease with just a regular wand
@DaveTheRPAGuy Жыл бұрын
Late response, but Dad passed away in 2022 so I figured I'd respond. He sometimes used this bar of metal with a small hole drilled through it that he attached to the end and it would spray much further up for 2 and 3 story buildings. I unfortunately don't know what it was called. I think the xjet probably would handle 2 story just fine by itself though.
@truthseeker5863 Жыл бұрын
@@DaveTheRPAGuy dang sorry about your loss and thanks for that info sir
@kobebryant7116 Жыл бұрын
Let the chemicals sit longer. 5-10 minutes
@Patrick-sx2ud Жыл бұрын
How do you modify it though
@bitsinmyblood Жыл бұрын
Have you upgraded to the m5?
@andrepastor4844 Жыл бұрын
Every move counted, pro. I love your XJet too my man✊🏼
@calklobuchar Жыл бұрын
U head of anyone going blind from sh overspray?
@steelthunder76 Жыл бұрын
Must be another self-proclaimed expert
@DaveTheRPAGuy Жыл бұрын
Dad never claimed to be an expert. And he passed away before your comment. Thank you for stopping by.
@Libertine7002 жыл бұрын
Doesn’t it weaken the ratio of your water/sodium hypo mix?
@colonelradec59562 жыл бұрын
i could see myself doing this lol. adhd add or whatever. thats alls it takes is forgetting once. that sucks.
@michaelbrooks15042 жыл бұрын
Do you have a video on modifying the Xjet. Thank you.
@jerrypelletier23282 жыл бұрын
What we supposed to look for?..... There was no explaination....What was the secret?
@fingolfin9086 Жыл бұрын
The mist and overspray from the first one and the much cleaner and softer stream from the second one. The modified version puts the injector behind the wand which cleans up the stream and allows for a jrod to be used at the tip.
@travisrobbins83052 жыл бұрын
To clarify for other rookies like me: - First take: X Jet fitting was directly connected to the soap tip/J-Rod - and was in front of the wand. - Second take: The wand was directly connected to the soap tip/J-Rod - and the X Jet injector was behind the wand. Blessings ✌🏽keep supporting each other! Our enemy is corporate elite wealth trying to monopolize the world. Not each other. Iron sharpens iron ⚔️
@giantslayer4732 жыл бұрын
Thanks for the info!
@bitsinmyblood Жыл бұрын
+1
@Atarumikari2 жыл бұрын
For the job in the video what was your bleach to water ratio in the bucket?
@Patrick-sx2ud Жыл бұрын
I read in different comments and seen different videos with a x jet you don't mix it just put the filter in undiluted SH
@fingolfin9086 Жыл бұрын
@@Patrick-sx2ud You do batch mix it if you don't want too hot of a mix even with an xjet, for example a 5 gpm washer with an xjet will pull at 2-1, so if you are using 12.5% sh that's going to be over 4%, which is too hot for a house wash in most cases. So you could go 50-50 in your bucket with water and get it down to 2%, which is more reasonable. It comes with plastic proportioners but that are trash and no one uses them.
@michaelkendle67732 жыл бұрын
What did he do?
@Ben-sv9op2 жыл бұрын
Is that the X jet m5ds .. So you can run chemicals through it? Is that what you’re doing in this video
@Ben-sv9op2 жыл бұрын
Could you apply chemicals with this tip and wash it as well ?
@renostubbs85042 жыл бұрын
Thank you sir
@carlostreadwell45652 жыл бұрын
What did u do to get a smoother stream
@carlostreadwell45652 жыл бұрын
What kinda pressure washer gpm and xjet
@valkarcy2 жыл бұрын
I love it. Nothing beats seeing a crossbow explode <3
@JiNKA2 жыл бұрын
Bro what?! That’s a fast Chem! F9?
@darenleeper16442 жыл бұрын
I cant believe that deer stays still for all of that
@johnr.timmers22972 жыл бұрын
I dry fired my verticle hunting bow and thank goodness I took it to the shop. I thought the limbs were ok but they broke then the technician tried to draw it back. They gave me a good deal on a Bear Vast to replace mine.
@cardinalprosoftwash2 жыл бұрын
No lie you (and a few others) just saved me $300🤣 was going to purchase the northstar softwash system $499 until I learned about this Xjet mod. Hats off to ya man thanks!
@chansbmiller3 ай бұрын
How do you do it?
@Kgoutdoor2 жыл бұрын
Can I use this if I don’t have a soft wash system?
@mechanicauto97042 жыл бұрын
that was funny
@painterken25423 жыл бұрын
If you can wash your car at the carwash..you can power wash your house.. unless your a dummy
@kennethbillups37943 жыл бұрын
Been there and done that. What awful and terrible feeling.
@jacobusblack3 жыл бұрын
I just.. I feel so bad for ya
@neness66203 жыл бұрын
Dry fire don't have anything to do with that , the arrow os so light that it's doesn't effect the vibrating of the string , it's just a old string or lack of grease .
@robertcarrington75993 жыл бұрын
I have a question. After a home has been painted, do you know how long to wait before soft washing it? Days, weeks, Months?
@rabbitskinner3 жыл бұрын
Don't give up your day job
@carlostreadwell45653 жыл бұрын
Invest in u a turbo nozzle heavy duty blu3 one less work buddy while ur trimming
@carlostreadwell45653 жыл бұрын
Look at that shit just falling off the best thing they no more extensions wands just bought mines last week love it