Well ya gotta wait at least 30 seconds..and leave it somewhat damp

Didnt fix my problems. Bars didnt work for me at all

I've used this product twice in my van when the labeling said it contained graphite. First time was in 2011 after 4 spark plugs became coated with wet combustion deposits. Found gas bubbles in the radiator coolant so was told by a local auto parts chain to use Bar's Leak since the auto repair shops won't use anything else. It worked and held up for 6 years / 15,000 miles before missing, overheating and bubbles in the radiator coolant reappeared. The second treatment has lasted 6 years / 15,000 miles. My '88 Chevy van has around 300,000 miles on it now so recently it went from running great to start/won't idle overnight. Found 4 vacuum leaks that didn't resolve the issue after being repaired so I replaced the 26 year old Duralast ICM. That helped it idle for a few seconds before stalling so replaced the original TPS and IAC. That fixed the problem so allowed the engine to idle for one hour to recharge the battery. The next morning it was back to start/ won't idle. I got it to idle by placing hard paper shims between the idle speed screw and the throttle cam then went to remove the radiator cap to check for exhaust bubbles since the engine was now missing. Saw too many bubbles so am getting ready to treat it for the third time with Bar's Leak new and improved product. I have a small vacuum gauge installed in the dash that showed 20 lbs of vacuum when idling for one hour. The next morning it now read 17 lbs at start then dropping with the pointer waving between 15 and 11 lbs while idling. It did the same thing in 2011 when cylinders 3 & 5 and 4 & 6 had coolant seepage so required non-foul plug adapters to keep the spark plugs dry while idling after adding the treatment. I'll be removing those four plugs to see how wet they are since I kept the adapters with a set of new plugs in the van just in case they'll be needed again. I have the van an Italian tune-up the day before it wouldn't idle in the morning so suspect sustained high speeds may affect the sealant plugs since the second treatment was required after driving 400 miles on the interstate with a full load in back and towing a fully loaded enclosed trailer. At that time I only removed the #5 plug to find it slightly wet with coolant so didn't bother to use the non-fouls. The missing stopped within a few minutes as the product sealed off the leaks. The plugs were new then so left them in to this date since their replacement intervals are every 30,000 miles. I'll remove #5 again to check its condition since it was the worst of the four that was affected in 2011.

lol that VALVE?? its called a THERMOSTAT lol

Easy to put on once you know the orientation. thanks for showing top/bottom and left and right.

3:45 hhfufu 😮 4:01

thats donnie bryan and the raging storms backing it!!!!!

The point of a counterbalance system is to keep the camera in place when releasing the handle, not to spring it back to horizontal

lol, "handle is in a way". Of course it is, it's in your face level. The tripod is not meant to be used that way, lower it. The handle should be at hand level.

THE WORST!!!

So many better options out there, solar generators, half the price, you can use them while charging through solar or plugged in, and you can charge your batteries, as Well............4 , 15ah batteries only give you 1200wh of power......

Me

Me

How did it hold up?

I am planning to use the bars leak head seal carbon fiber reinforced stuff in my turbocharged race engine… the cylinder 4 leaks a little bit of coolant just have misfire when cold once hot it runs fine but lacks some power.. if it a better way to remove the spark plug and disconnect the injectors in cylinder 4 to ensure it the fix works better? Pls let me know..

Thanks

Classic youtube. I love this

Running in your dreams be like:

Gonna help barry Henssler write a book on necros and the midwest hardcore punk scene in general. Pretty geeked to do it. Its aboit time .. also look around for necros' re issues come october

Any updates?

The one w/ teeth bared, but apparently enjoying it! The dog who was woken up but must have been dreaming, yea, that's it. Don't you hate those kind of dreams? The dog spinning around who must've snuck mom's coffee again & that cat's head moving to every spin! Then, the MOM! MOM! MY LEG! SHE BROKE MY LEG! Isn't that how siblings are tho?! 🐶🙀😿😼😺😸😹😻 You've gotta see KITTEN MEETS LIZARD TWINS. It's old, but it's still the BEST!

guys, do you drain radiator before you put Bars in?

Lizardss! 🦎

Lesson of the day. Fix your own stuff because the "experts" are actually idiots

Amazing video, thanks 💖💖💖

iCloud

Ive got an antique book about the origins of northwest ohio...its from the early 1800s! First edition! Found it with a stack of old books that someone was throwing away!

How do you set the clock? 9:15 9:15

Simple and clear instructions Thank you

Things haven't changed. Our mail now goes to Detroit first, then back to Toledo. Great video! Loved the history.

This guy knows what he’s doing

Ho lo stesso mal di testa da un po' di tempo, ma techdomercado di lg mi ha aiutato a risolvere il problema

Big help, thanks!

What a life saver and bandaid saver this video is. I wasted a few bandaids trying to apply peel away the frame before placing them on the area. Thank you so much for sharing! Take care

Thanks this too much talking i was so frustrated to seal my wound for 4min vid

one of the best albums of all time - too bad we can't stay young forever

I see all your cars in this video.!nice✌️walt

kzbin.info/www/bejne/gpTJqIGsg6-sZ8ksi=Oo0vXj6k_ndjDWC0

This is great. You merged video from my channel with audio of the band before I joined. Nice job aligning clips to the song. Just stumbled on this today. Nice work.

0:56

I have always wondered if Eddie Van Halen saw Rob & the Raisins play this version of "you really got me"----It certainly predates VHalen 1......It's possible it was just the zeitgeist at the time, but......

I knew KZbin would have instructions for opening these confounded bandaids! Thanks.

Erhkespurev

Thanks❤

Thank you!

how will apply the bar leak without a radiator opening?

Hello Joseph. I just watched your video. My '01 4Runner has a bad head gasket (no overheating, no white smoke and no coolant in the oil). I'm getting a misfiring code and I took the car to the mechanic and said it was the head gasket. Anyway, you did this video in 2017 and my question is,, are you still driving the car with no head gasket problems (it's been 6 years or so)? If not, how long did this product have your car running for? Thanks

This was super helpful!!! I've had this Dyson for years to use in my basement (I've upgraded to a cordless Dyson for the main living area recently). I have NEVER cleaned it....yikes!! Your video will be VERY helpful when I tackle this project this weekend, Thank you!

Ohio can have it

Thank you soooo much because I was LOST!!!!!!