hey just wanted to say i used to love your videos. not sure if youll see this but hope your doing well.
@CompEdgeX201316 күн бұрын
Thank you, I appreciate that. Doing OK, its just life got in the way of videos.
@NeMoC533 ай бұрын
This might be my favorite style of DIY drawbar. Really compact, not too tall. Nice design. Great job. As imitation is the best form of flattery…. I will be copying this 😎👍
@sherylbelanger7963 ай бұрын
How does the side knob come off
@ConallDad4 ай бұрын
Well done
@joet.4756 Жыл бұрын
Nice work !
@ronwilken5219 Жыл бұрын
Hi Colin, I know I'm late to the party but I'm looking for the first part of this project. I'm thinking of a similar unit for my new PM932 mill. I've seen Mr Presley's vesion and also pragmaticlee's version. He has a similar machine to mine but I'm not enthusiastic about his operational function. I prefer Presley's version. Do you have a part one of this build and if so where is it? Thanks in advance. Regards from Canada's banana belt. 🤞🇨🇦🍌🥋🇺🇦🕊️🇺🇲👍 I think I found it but still seems like a huge jump from your beginning to plan it in AutoCAD to where you're building ot in what I perseve as part 2.
@davidjames1007 Жыл бұрын
Great job, saved that CV joint from being thrown in the bin
@jasonhull5712 Жыл бұрын
Great design and execution. Chee rd s
@wendell454 Жыл бұрын
You can buy a power feed for a mill and adapt it to your mag drill handle and have power feed. I'm working on mine now if you'd like contact me and I'll send you some videos of it at work
@dirtnyaface Жыл бұрын
Nice set up, how big is your shop?
@dirtnyaface Жыл бұрын
Any videos for that adjustment clamp you made?
@bearbait2221 Жыл бұрын
That is the coolest welding jacket I've ever seen!! what brand is it? and thanks for the teachings i now can afford to line bore :)
@MattysWorkshop2 жыл бұрын
Gday, the line borer worked a treat, brilliant job mate, Cheers
@MattysWorkshop2 жыл бұрын
Gday Colin, this works great and not expensive to build, new sub here, Cheers
@edwinsanchez11062 жыл бұрын
Hola buenas donde puedo conseguir una de esas soy de bolivia
@northmanlogging27692 жыл бұрын
on yer setting tool, its possible to get "micrometer heads" just the threaded bit with the thimble and barrel so you can mount that and use it to adjust the cutting tool.
@baazigaj91252 жыл бұрын
what is that boring bar od... is it friendly with heavy cuts.
@petermoale21162 жыл бұрын
I am curious as to how long this project took you to complete ? Great rebuild !
@munawirmassagoni88812 жыл бұрын
Simple 😎 nicee
@danielelliott36592 жыл бұрын
No need for square holes in the boring bar. I built mine 20 years ago and it has round holes for the tool bit. Works fine
@jeremycable512 жыл бұрын
Glad I stumbled across your channel these stops are premo buddy absolutely gorgeous work look forward to binge watching your channel as soon as I wrap up abombs been watching machining content about two years been doing it myself for about a year learning as I go picking up all the tips I can as I watch and work thank you for taking the time and effort to video this and post
@CompEdgeX20132 жыл бұрын
Thanks for the comment sir. Sorry I havent done many videos for a while now but life gets in the way a fair bit. Cheers, Colin
@jeremycable512 жыл бұрын
Man this is sweet
@bulletproofpepper22 жыл бұрын
Thanks for sharing! Hope it fits
@gusnorthcott63203 жыл бұрын
Cutting edge
@mantenimientoreparacionyal43593 жыл бұрын
Very good job I am very interested and I have learned many thanks for sharing is what I was looking for I have a mag drill and I needed to do a borin line with the mag thank you very much for sharing
@mrdrivermechanictv42133 жыл бұрын
Watching from Qatar Awesome
@KimbrellBrad3 жыл бұрын
Colin, you are a quality individual! Nice shop tour and gift!
@KimbrellBrad3 жыл бұрын
Looks like great stuff! No vidoes in a while...hope you are okay!
@KimbrellBrad3 жыл бұрын
Sorry to see that your business is suffering. Hoping you can hold on until this junk is over! Great to stay busy improving the shop while you are waiting. Missed you - I've been out of metalworking for 6 years since my Dad passed away but getting geared up to get back into the shop!
@marcuswadel75173 жыл бұрын
What was wrong with the line-boring unit You build based on a magdrill ? It looked quite solid.
@AviationAutomation3 жыл бұрын
lord 'tunderin. nice job
@offgridmangogrower3 жыл бұрын
I'm still perplexed on winch position on the gantry beam. I may build a winch saddle mount over the beam with bearings so my winch wire does not bind and directly meets the pulley block on the lifting end.
@offgridmangogrower3 жыл бұрын
Like your crane project...mounting the 12 v winch on top really helped solved my winch location delema. I may use a fair lead or roller to prevent a winch wire failure.
@lesthompson59073 жыл бұрын
very interesting I once own a inline boring head for doing , lorry calendars I think I still have the micrometre that mad the fine adjustments .
@karlodonovan49153 жыл бұрын
good set up
@bebsmusic74353 жыл бұрын
Holy Moly, Jack Elam is still alive OMG !!!!
@craneridercranerider60383 жыл бұрын
Check your horse break to chattering is coming from one too big of a gap and it breaking up properly adjustment but good job on
@bearsrodshop70673 жыл бұрын
New subscriber here,,nice fabrication. Thx to Ray, his channel lead me to yours. Now to start fabing up one here at our shop. The kit's like the one's at Priest Tools are way out my retirement budget, and to over designed for a mom & pop shop,,Thz for sharing,,,Bear
@mikethomas8943 жыл бұрын
Gidday Shagger, about to mount a fly cutter on mine and i thought i'll have a look on You Tube if any one else has done this. The only thing I'd change on yours is the steel base the mag base mounts onto. I'd go 1 inch thick, thicker it is the stronger it hangs on. nice work though.
@patdexter91883 жыл бұрын
I did that untill someone walked by and tripped over the plug end and everything came crashing down! So I took the magnet off installed insulated spade connectors and added a few feet of wire enough to get magnet out of the way safely. Then cut a 1" plate to put in the magnets place bolting it to the drill motor. Even a power bump and it will fall. And by lengthening the wires it still ran. Was a newer drill with circuit board in it. Good luck! Nice work.
@steveu2353 жыл бұрын
Nice job looks really nice
@patdexter91883 жыл бұрын
Hard to keep smaller bars from wobbling. Without 3 bearings. As long as cuts aren't to deep. Nice machine!
@chappyaugusto3 жыл бұрын
How about of the welding iner face . Any ideas...definitely no by hand ...
@donaldnaymon32703 жыл бұрын
Great setup. I have been thinking of doing a setup with mag drill. Thank you for sharing.
@mantenimientoreparacionyal43593 жыл бұрын
me too
@ریاضدریس-س1ز3 жыл бұрын
👏👏👏👍🇮🇷🇮🇷🇮🇷💗
@crslbl3 жыл бұрын
Great video ! Great work ! The only confusing part for me is the imperial system. I would get a headache if i had to work in imperial😅
@banger355tw3 жыл бұрын
Thoroughly enjoyed this video. Thanks
@CompEdgeX20133 жыл бұрын
Thanks banger. Appreciate the comment.. :-)
@valterforlano97343 жыл бұрын
Good evening great job compliments I love it kindly could you send me the drawings with the relative specifications and the model and measurements of the pneumatic piston thanks regards Valter Italy
@CompEdgeX20133 жыл бұрын
Thank you sir for the comment. Sorry, I do not have drawings available for the unit. It was built on-the-fly using what materials I had available.
@valterforlano97343 жыл бұрын
@@CompEdgeX2013 could you tell me the characteristics and measures of the pneumatic cylinder !!
@valterforlano97343 жыл бұрын
Hello could you kindly email me the drawings for the drawbar including the piston drawings. thanks regards Valter Italy
@91rss3 жыл бұрын
good stuff but with global warning , you wont see a drop of snow any more there wouldnt you?