Glad you liked it 😊 Thank you for asking. Since beetroot juice contains water, it creates an environment where bacteria and mold can grow easily. Without a preservative, the lip balm will have a very short shelf life. Hope that helps Have a nice day 🤩

Hi Thank you for watching and for your question! The shelf life of an air freshener gel made with water, gelatin, and essential oil can vary. Without preservatives, it typically lasts around 1 to 3 months, as the water and gelatin can provide a breeding ground for bacteria and mold over time. If you add a preservative like Optiphen Plus or Phenoxyethanol, you can extend the shelf life to about 6 months or more Hope that helps☺️ Have a nice day 🤩

Please answer this . Its for our project

Hi Thank you for watching 💕and asking 😊 I used a pharmaceutical grade which is extremely high-purity. But you can use food-grade CMC for this project. It’s ideal for making gels like this because it dissolves well and provides good clarity. Lot of viewers had problem in dissolving CMC so I also recommended using Hydroxy ethyl cellulose (HEC) or Hydroxy propyl methyl cellulose (HPMC) instead. So please go through the comment section. Let me know if you need help finding the right one! Have a nice day 🤩

Glad you liked it 😌 Thank you for watching and for your lovely comments 🥰💕 Have a nice day

I share tutorials on my KZbin channel youtube.com/@diy.personalcare?si=EZRS0EwgGg0eqK98) Please feel free to check out my videos, and let me know if there's anything specific you'd like me to cover! 😊 Have a nice day 🤩

Thank you for watching and for your lovely comments 💕 Have a nice day, 🤩

Hi Thank you for watching and for your lovely comments 😍 1. The home gel easily last for over a month. Rest depends on the fragrance used. 2. Yes carrageenan can be used in place of CMC. But personally I never tried using it. So if you try, I would love to know how it turned out. Hope that helps 😊 All the best for your project👍 Have a nice day 🤩

Hi Glad you asked👍 Lactic acid helps gently exfoliate and enhance the cream's effectiveness, but since this recipe already includes urea, which also softens and hydrates tough skin, you can skip the lactic acid if you'd like. The cream will still work well for healing cracked heels, though it might take a bit longer to see the same level of smoothness. How that helps ☺️ Have a nice day 🤩

You are so welcome! I'm happy to share 😊 Thank you for your lovely comments 💕 Have a nice day 🤩

Glad you liked it 😊 Thank you for your lovely comments ❤️ Have a nice day 🤩

Thank you for asking. 😊 Yes sure you can.👍 Have a nice day🤩

Glad it was helpful. 😊 Thank you for lovely comments 😍 Have a nice day 🤩

Glad you liked it Thank you for watching and for your lovely comments 😊 Have a nice day 🤩

Hi! Thank you for your question! 👍💕 The pH of this aloe vera shower gel naturally falls between 5.0 and 6.0, which is perfect for skin and helps maintain its protective barrier. I appreciate you bringing this up-I’ll make sure to mention it in future videos. Hope that helps 😊 Have a nice day🤩

Glad you liked it. 💕 Thank you for asking. 😍 1. If you are adding Rosemary extract and Leucidal Liquid SF, then it's not necessary to keep in the fridge. It will stay fresh for at least 12 months. 2. If you are not adding any preservative, in that case yes you will need to keep in the fridge. It's shelf life will be roughly 1-2 weeks depending on various factors as purity of water, sterility of containers used etc. Hope that helps😊 Have a nice day 🤩

I only have rosemary. Is that enough?

Hi again 1. Actually without preservatives if the cream can last for 1 month, it's considered very long. 2. While rosemary extract can help with antioxidant and some antimicrobial properties, it doesn't offer full protection against microbial contamination. 3. If you're using store-bought aloe vera gel in your rice face cream, the shelf life will be slightly longer compared to homemade aloe vera gel, but it still depends on the specific ingredients in the store-bought product. 4. If you want to avoid preservatives entirely, stick to an oil-only formulation (no aloe vera gel) for a more stable product, or make smaller batches to use within a short period. Hope that helps😊 Have a nice day 🤩

It helps thank you.

Glad you liked it 😊 Thank you for watching and for your lovely comments Have a nice day 🤩

Thank you for watching and for your lovely comments💕 Have a nice day 🤩

Hi Thanks for your question! Now only I realised that I forgot mentioning it in the video. What I added in the video is wax dye, which is used to color the wax melts. Wax dyes are specially formulated for use in wax and are available in various colors. Let me know if you have any other questions!😊 Hope that helps 👍 Have a nice day

@@diy.personalcare thank you so much 😇 All your videos are awesome. I don't have any suggestions I only have one request, please upload perfume making 🙏🏻

I am so glad to know you liked my videos. Sure will try to make a video about perfume making soon. Thanks for the suggestion. Have a nice day 😍

Hi! Thank you for watching and trying. Really glad you asked! 👍 1. If you're using the home-based recipe, the separation happens because oil and water don't naturally mix. To help, you can try making gel more thicker and stirring the gel gently before use. 2. If you are using commercial formulation, you can try adding an emulsifier, like Polysorbate 80 or liquid lecithin (in 1:1 ratio) , to the essential oil before mixing it into the gel. Hope that helps😊 Please let me know how it goes or if you have more questions! Have a nice day 😍

Hi Thank you for your comment! I understand the concern about high production costs. I actually made another video where I demonstrated how to make an economy version of dishwashing liquid that might help reduce expenses. You can check it out here: [.kzbin.info/www/bejne/hWbSXpZsa6xrh6csi=Jc94_aCYMiNqxVKz] Also if distilled water feels too expensive, you can also use water from a drinking water filter (like those with reverse osmosis or carbon filters). It’s a cost-effective alternative and works just as well for formulations. Just ensure the water is clean and free from impurities. I hope this helps! 👍 Please feel free to let me know if you have more questions!😊 Have a nice day

npanood ko n po pero malaki p dn ang gastos.

ang isang 1 liter po ay 35.00 lng kng bibilhin sa tindahan kaya dpt ang costing papatak lng ng mas mababa sa 20.00 or 15.00 kng pang business . Sa iba ksi nagbebenta sila ng per pack mkakagawa ka ng 15 pcs at pmapatak dn sya ng 15.00 sana po maituro nyo sa amin ung ganun. mkhang maganda ung gingwa nyo kya lng medyo mahal

Hi again Thank you for your feedback! I'm sorry to hear it ended up being expensive for you. There are few ways to cut costs: 1. Once you are satisfied with the formulation, look for ingredients in bulk or at wholesale prices, as this often reduces the cost per batch. 2. Alternatively, you could try adjusting the formulation slightly to fit your budget while maintaining the effectiveness of the dishwashing liquid. 3. Use filter water in place of distilled water so you don't have to pay for water. Let me know which ingredients are costing the most, and I’ll try to help with some alternatives! Hope that helps😊 Have a nice day

Thank you for watching and for your comments Water used is deionized water as mentioned in the beginning of the video at 00:12 Hope that helps😊 Have a nice day 😍

hndi po. what is alternative for deionized water?

Hi Thank you for asking. You can always use distilled water in place of deionized water Hope that helps 😊 Have a nice day 😍

Hi again You can find most of the ingredients I used at online stores. In case you need details about any particular chemical, please feel free to ask. Hope that helps😊

Glad you liked it Thank you for watching and for your lovely comments 👌 In general, your air freshener should release fragrance for about 4-6 weeks. For commercial formulation, longevity of your fragrance depends on few factors. To make your air freshener last longer you can adjust the formulation and usage strategy as follows: 1. Use a higher percentage of fragrance oil (e.g., 3-5%) to ensure a prolonged scent. 2. Use a combination of fast-evaporating top notes and slow-evaporating base notes. This creates a sustained fragrance profile over time. 3. Increasing Propylene glycol percentage slightly (e.g., to 3-5%) can improve longevity. 4. Adjust the HPMC/ CMC level to create a thicker gel or a slow-release matrix. 5. Store the air freshener in a container with a small opening or perforated lid to slow down evaporation. Hope that helps😊 Have a nice day 😍

@@diy.personalcareThank you so much ❤

Have a wonderful day

@foreman4900 Hey there Welcome back It could be because of a few reasons. Are you using hot water to dissolve HPMC? Below is my reply from 3 days back where I explained the procedure for dissolving HPMC 1. Sprinkle HPMC powder gradually into the water (room temperature) while stirring continuously. 2. Stir with a whisk 3. Allow the mixture to sit at room temperature for 30 minutes to an hour. 4. Once HPMC is hydrated, gradually heat the solution to about 60-70°C (140-158°F) while stirring gently. This activates the HPMC and causes full hydration. 5. Continue stirring until you achieve a smooth, lump-free gel. 6. Once gel is fully formed then you can add remaining ingredients one by one stirring in between Generally HPMC forms a very stable gel. So please make sure to follow the waiting time and stir continuously while heating Hope the helps Have a nice day

Hi Thank you for asking😊 Yes first it's oily. When you add propylene glycol solution it becomes like watery and seems like going to separate but don't worry. When you will add NaOH solution it will come to it's proper form as the pH is adjusted. Hope that helps👍 Have a nice day😍

Hey there Yes dipropylene glycol can be added. For personal use no issue as such but fragrance might finish faster. For commercial use buyer might not like the look of it. Hope that helps Have a nice day

Thank you for watching and for your comments💕 Gel won't dissappear but it will sure reduce in quantity gradually Hope that helps Have a nice day 😍

I’m glad you found the video helpful. Happy to hear you'll be trying it out! 😊 Thank you for watching and for your lovely comments 🙏

Hi again Yes, you can add fragrance oil to aloe vera gel, but with a few important considerations: 1. Ensure the fragrance oil is specifically labeled as "skin-safe" or "cosmetic grade." 2. Use only a small amount (typically 0.1-0.5%) to prevent any potential irritation 3. Check if the fragrance oil blends well with your formulation. 4. If you're making aloe vera gel for commercial purposes, fragrance oils must be approved for cosmetic use. Hope that helps 👍 Have a nice day 🤩

Thank you for watching and for your comments 💕 If you want to use Aloe Vera extract please check the label on your aloe vera extract for its concentration ratio. Aloe vera extracts vary widely in concentration (e.g., 10x, 40x, or as a 1:1 liquid extract) 1. If your extract is 1:1 (meaning it's the same as fresh aloe vera juice), that means you can't add any water. Use the extract directly 2. If it’s 10x concentrated, you would need 200ml of extract in 800ml of water 3. If it’s 40x concentrated, you would need 50ml of extract in 950ml of water So it all depends on the concentration of your Aloe Vera extract Hope that helps 👍 Have a nice day 🤩

Hi Good to know about your research. 🥰 Thank you for asking. ☺️ You can either use the first recipe which I showed in video or you can use following ingredients 1. Distilled Water: 90% 2. Agar Agar or Carrageenan Powder: 1-2% - A natural gelling agent 3. Essential Oil of Citrus Aurantifolia (Lime): 3-5% - For fragrance. You may adjust this amount depending on your desired scent strength. 4. Natural solubilizer, like Polysorbate 20 or Solubol. These ingredients help essential oils mix into water without separating. For a small batch, try adding 1 part Polysorbate 20 for every 1 part essential oil (a 1:1 ratio) and stir it well before adding to the gel. 5. Natural Preservative: Leucidal Liquid (made from radish root ferment) or Grapefruit Seed Extract. Use according to the manufacturer’s recommendations. Instructions 1. Heat the water to around 80-90°C (176-194°F). 2. Slowly sprinkle agar agar or carrageenan powder into the hot water, whisking continuously to dissolve fully. Keep stirring until the mixture is thickened and slightly gel-like. 3. Let the mixture cool slightly 4. Add citrus E.O to equal amount of polysorbate 20 in a separate container 4. Once the gel has cooled to around 40-50°C (104-122°F), add the lime essential oil and solubilizer mix and stir well. 5. Add preservative according to the usage rate. Hope that helps Please feel free to ask in case of any confusion All the best with your project 👍 Have a nice day 🤩

Commercial How to mic agar agar

Thank you for your question! In this video, I demonstrated how to make freshener gel using two different methods, but I didn’t include agar agar in the formulations. If you’re interested in learning how to use agar agar for gel-making, I can provide some general guidance or consider making a future video on it. Let me know!

Hi Thank you for watching and for your comments Yes, you can replace CMC with xanthan gum in your air freshener gel, but there are a few things to consider: 1. Xanthan gum creates a different gel texture compared to CMC. 2. Xanthan gum can sometimes affect the way fragrance is released, so you might need to adjust the concentration of fragrance for optimal scent diffusion. Hope that helps 👍 Have a nice day 🤩

Also can I substitute np:10 for like Decyl Glucoside?

Hi there, hope you are doing well! The scent duration can vary based on several factors: Fragrance Type: Essential oils may not linger as long as synthetic fragrance oils Concentration of Fragrance: A higher concentration of fragrance oil will give a more intense scent that can last longer. Environment: The scent will dissipate faster in larger spaces Typically, air freshener sprays will last 1-3 hours in the air for a moderate fragrance level. Yes, adding an odor neutralizer can help make your air freshener spray more effective by not only masking unwanted odors but also neutralizing them. Yes, you can substitute NP-10 (nonylphenol ethoxylate) with decyl glucoside Hope that helps 👍 Have a nice day 🤩

Thank you for watching and for your comments 👍 Will try to cover the topic in my upcoming videos ☺️ Have a nice day 🤩

Thank you for watching and for the suggestion. I will try to provide links for ingredients in future videos. 😊 In the meantime, most of the ingredients should be available online Have a nice day 🤩

Hi Optiphen plus is a preservative which is used in wide variety of personal care and household products Yes, pumice is a natural stone used as an abrasive. Lemonene is a naturally occurring oil extracted from citrus fruits. Hope the helps 👍 Have a nice day 🤩

Glad it was helpful Thank you so much for watching and for your lovely comments 🥰 💕 I would say avoid adding lavender flowers to baby oil directly, as they can create uneven or coarse texture that may feel rough on delicate baby skin. Instead, you might try infusing jojoba oil with dry lavender flowers before adding it to other oils. Hope that helps 👍♥️ Have a nice day 🤩

Hi Glad you liked it. 😊 Thank you for watching For personal use recipe you can increase the quantity of gelatin to make it thicker For commercial formulation try replacing the thickener CMC with HEC ( Hydroxy Ethyl cellulose) or HPMC (Hydroxy propyl methyl cellulose) in same quantity as CMC in video. HEC can be easily dissolved in cold water. HPMC needs hot water to dissolve but forms harder gel. You can also increase the percentage of thickener to get desired consistency. Yes you can increase the percentage of essential oil Hope that helps 👍 Have a nice day 🤩

@@diy.personalcare thank you 🙏

Hi Friend, hope everything is well with you. I been experimenting with the commercial formula with CMC also HPMC . I try different essential oil percentages , yet I feel the gel aroma only last for a couple of days. What’s the maximum amount I can add?? For example I’m doing a 1000ml batch . I’m looking for a very strong aroma . I try already different oils and fragrances . But all seem to last about the same rate too. I’m also doing a gel with carrageenan as well

Hey there Hope you are doing well too Actually several additional ingredients and techniques can enhance the longevity of a commercial air freshener gel. These include advanced additives and modern fragrance technologies. 1. Look for microencapsulation technologies from fragrance suppliers. Add the encapsulated fragrance as per the supplier's guidelines (usually in the final phase to avoid damaging capsules). 2. Adding Zinc ricinoleate or cyclodextrins can neutralize malodors and allow the fragrance to dominate. 3. Add Benzophenone-4 or other UV absorbers. It protects the fragrance and gel base from UV degradation. 4. Add small amounts of dimethicone or silicone fluid. It reduces fragrance evaporation and enhances scent longevity. 5. Add BHT (butylated hydroxytoluene) or vitamin E (tocopherol). It prevents fragrance oxidation, which can shorten the scent life. But the issue is that all these things add to the costing which makes the product too expensive. You can try the the following formulation to enhance the longevity Deionized Water: 83 g Carbomer: 0.8 g Fragrance Oil (Blended with Base Notes): 7-10g DPG (Fixative): 3 g UV Stabilizer (Benzophenone-4): 0.2 g Antioxidant (Vitamin E or BHT): 0.2 g Glycerin or Propylene Glycol (Humectant): 3 g Triethanolamine (TEA): 0.5 g Preservative (Phenoxyethanol or Potassium Sorbate): As per recommendation Hope that helps👍 Have a nice day 😊

@@diy.personalcare Thank you for the replies. Wow never heard of micro encapsulation fragrance. Is something I will look into. How will that work in a Gel air freshener?? Is there a video on how to make that ? Also thank you for this formula. I have pretty much all the ingredients except the BHT . Will try this soon . Also friend , how a fragrance based with notes ? That’s also new to me

Hi Thank you for watching and for your comments I would suggest 100 ml sulfonic acid and 13g caustic soda to 1 litre batch of detergent. But as you are adding extra ingredients, you will need to check percentage and reactions of all other ingredients like 1. Reduce SLES to 50g 2. Reduce CDEA to 30 ml 3. STPP might reduce the viscosity of the product in presence of acid so try adding small percentage first or maybe omit completely 4. Adjust the percentage of water accordingly Hope that helps 👍 Have a nice day 🤩

Hi Thank you for watching and for your comments. 🥰 Yes you can use guar gum in place of xanthan gum to make the gel. But there are few differences 1. Guar gum produce a softer and creamier gel compared to xanthan gum. If you are aiming for a firmer gel, you may need to adjust the amount of guar gum used 2. Xanthan gum provides better stability over time. Guar gum can lead to separation if not used with other stabilizers. Hope that helps 👍 Have a nice day 🤩

​​@@diy.personalcare may I know what stabilizers are to be used while using guar gum?

Hi Aloe Vera gel typically has low pH, and guar gum can degrade in acidic environments. So adjusting pH with small amount of Sodium hydroxide or TEA (Triethanolamine) can ensure that guar gum maintains it's thickening ability without degrading over time. Make sure the pH reaches around 4.5 to 5 which is ideal for preservative (Optiphen plus) and guar gum both. These are not traditional stabilizers like emulsifiers or gelling agent but works as pH stabilizers. Please feel free to ask if you have any further concerns ☺️ I hope that helps 👍 Have a nice day 🤩

Please contact me.

Thank you for watching and for your comments 😊 Will try to cover the topic in my upcoming videos Have a nice day. 🤩

Hi Thank you for watching. 😊 I am glad you asked 🙏 Formulation for 100ml 90% distilled water 2% CMC Note: Please try using HEC (Hydroxy ethyl cellulose) or HPMC (Hydroxy propyl methyl cellulose) as thickener coz many viewers find it difficult to dissolve CMC in water 0.5% Sodium benzoate 1.5% Propylene glycol 5% Fragrance 1% NaCl (common salt) Hope that helps 👍 Have a nice day 🤩

@@diy.personalcare thank you so much 🥰

Hi mam. I need to know the colour which u use. And here what is the thickening agent bcz on video u sed CMC it got thickened soon in video itself. U suggested to use HPMC. I tried but I don't see it is thickening while I am working. How long we need to allow time for thickening mam.

Hi Thank you for asking ☺️ I used soap dye for colouring Yes I recommended replacing the thickener CMC with HEC ( Hydroxy Ethyl cellulose) or HPMC (Hydroxy propyl methyl cellulose) in same quantity as CMC in video. ( Actually CMC quality I used is very different from the one commonly sold which I didn't realise while recording ) 1. HEC can be easily dissolved in cold water and you can see thickening within 10-20 minutes. 2. HPMC needs hot water to dissolve but forms harder gel. Once you dissolve it in water, keep aside for about 30 minutes and you will see very nice gel formed. 3. You can also increase the percentage of thickener to get desired consistency but as far as I know the percentage I gave in video is good enough. Please try again and let me know if you still face any problem. Will be glad to help. All the best for your project 👍 Have a nice day 🤩

@@diy.personalcare thank you so much for your response mam . I tried using HPMC in hot water as per the % suggested by u in the first comment . I set it aside for 48 hours still it is in liquid state !

Thank you for watching and for your comments 😊 I usually just pick up any unflavoured gelatin that's available at my local store. As long as it's not expired, it should work just fine Hope that helps 👍 Have a nice day 🤩

Thank you for watching. Glad you liked it ☺️ Have a nice day 🤩

Thank you for watching and for your lovely comments 🥰💕 Glad you liked it 😊 Have a nice day 🤩

Hi Thank you for watching and for your comments 💕 🥰 I bought my watch glasses from online store. They are readily available under the name of "laboratory watch glasses". Hope you can find one suitable for yourself.👍😊 Have a nice day 🤩

Thank you for watching and for your comments 😊 If I know sure I will try

@@diy.personalcare I use an insect spray repellent that’s safe to use around pets and kids . . I buy a lot for my back yard and front yard. It says it has 4% essential oil . The rest 96% percent inner ingredients are Water , glycerin , Polyglycerol Oleate , soap. Not sure how to break the rest of the ingredients percentage. Also are they using polyglyceryl oleate -4 ? Could you help elaborate more?? Much appreciated 🙂

How much percentage of polyglycerol oleate ? And waste and glycerin

Hi Before that I would like to know the usage instructions written on the packaging. Have a nice day 🤩

@@diy.personalcare Shake well before use . Spray problem areas . For best results spray until the surface area is covered.

Thank you for watching and for your comments 🥰 You can substitute Peppermint essential oil with 1. Tea tree oil for its antibacterial properties, 2. Lavender oil for its soothing and healing effects, 3. You can also skip it altogether by adding few extra drops of eucalyptus essential oil. Hope that helps 👍 Have a nice day 🤩