So you have to have the ecu AND manifold. Thats pretty lame. Airlift has everything integrated into one unit.
@damoville662 күн бұрын
I have a large leak coming from the small holes on manifold above a connector. What causes that
@bagridersКүн бұрын
It sounds like one of the poppets is malfunctioning. This is a very uncommon situation, you should reach out to who ever you purchased the kit from. Our number is 844-404-7344
@tealcloudz89152 күн бұрын
Link to this kit ?
@bagridersКүн бұрын
Here you are: www.bagriders.com/audi-q5-sq5-b8-air-lift-performance-3p-air-ride-kit.html
@Demonwolf863 күн бұрын
That was good video that is the set up I want for my sti
@KL-01024 күн бұрын
Does it do auto leveling?
@bagriders4 күн бұрын
Yes!
@davidtentoesdown_5 күн бұрын
Hey I recently noticed that my rear wheels bounce way more it used to, I never had a problem riding on the LOW setting but now I be banging my quarter panel. I stiffen my ride setting and it didn’t change anything
@bagriders5 күн бұрын
What brand of suspension, and what car? It sounds like you are at a low spring rate (wheelrate) and that is causing excessive travel. There is no easy fix apart from raising the car up. Super Low kits use the thickest possible air springs, and we spec the smaller air springs when ever possible.
@schnuddel1127 күн бұрын
Has anyone tried to change the hole original support bearing to one from KW or something? In case there is absolutely no solution for the clunking problem of the airlift pillowballbearing. I'm totally annoyed, believe it or not 😂
@bagriders5 күн бұрын
What exact car do you have? I can send you a link to an upgrade that will permanently help, along with a discount code.
@schnuddel1125 күн бұрын
I have a mustang LAE. But it's an EU model because im living in Germany. What is this update about? Just a new pillowball bearing for changing?
@bagriders3 күн бұрын
It's a little bit pricey, but Air Lift offers updated bags that include a radial bearing (much like how the S550 Super Low kit works) the radial bearing protects the Spherical (aka Pillowball). Again it's pricey to do the 'upgrade' but our team could supply you with a discount code if you use the chat feature on Bagriders.com - here's the link to the upgraded air springs, keep in mind you'll need TWO, and you'll want to be sure you have a tight set of sphericals. Link here: www.bagriders.com/air-lift-performance-double-bellow-front-bag-50751.html
@schnuddel1123 күн бұрын
Thanks, but I can't see a top mounting on these bags to install.😮
@bagriders3 күн бұрын
@@schnuddel112 It's an outdated photo, they are the correct air springs for the S550 front.
@DaveyA9 күн бұрын
Hey so I’m following the recommended psi and height for my gr86 on Bag Riders Super Lows. However I hear the rear topping out, if I fill the bag with more psi it doesn’t happen as often, any recommendations?
@bagriders8 күн бұрын
I see that we recommend 40PSI in the PDF manual. What are you testing it at when you said you're adding more? What does the ride quality feel like at your new pressure?
@DaveyA8 күн бұрын
@@bagriders around 50psi the ride quality feels about the same, maybe a little bit more stiff
@nickcaballero42649 күн бұрын
i recently starting hearing a rattling like noise coming from my front end on both sides but more notable on the right and i took a look at everything and nothing is loose or visibly wrong. i’m worried it topped out but i really don’t know for sure, if it did is that covered on the warranty?
@bagriders8 күн бұрын
Topping out won't cause an "instant" failure. It's more of an issue over time, and it means that the plastic internal bump stop will evenly be destroyed. A rattling noise could be some of part of the vehicle other than your suspensions, so consider having who ever installed your system take a look at the vehicle.
@raymencaldwell385410 күн бұрын
You do know you don’t have to unplug each fuse, just connect one lead to the top of a fuse, the little metal piece, and connect other lead to negative terminal on battery, 10x faster and easier
@TheGrindcorps11 күн бұрын
Oh man! This is the holy grail. I wish I had this for my M3. If I wasn't thinking of selling it sooner than later for something a hot hatch I would get it. I got my M3 used and the previous owner had dropped it ridiculous low on some adjustable KW coilovers with an absurdly huge splitter at that. I love driving as low as possible but I had to raise it quite a bit because I basically couldn't go through ANY around me. I am talking I would have to slow down to a crawl and go sideways every single time. People behind me would be extremely, extremely pissed constant thinking and I was always worried I was going to get pulled over and arrested for some kind of driving on drugs or something because it is so not normal to stop at intersections with green lights. I thought the would just arrest me and make me go downtown to do a blood test because it's really not normal to do that.
@DaveyA12 күн бұрын
How do I know if my air spring is bottoming out or topping out? Cause when I accidentally hit a small pot hole, I heard a loud-ish thud sound… but I’m following the specs you guys recommend for my GR86. This is on the Super Low suspension and I mainly hear it in the rear.
@bagriders11 күн бұрын
Air ride is not prone to common bottoming out issues because the PSI pushing your car upward (against gravity and downward forces) becomes increasing strong. Progressive coils springs are like this as well. So I would be with 95% odds that the sound is topping out!
@Yhuyhu012312 күн бұрын
I had no idea you could spin the bag to adjust the height! Thank you for this informative video Bagriders!
@bagriders12 күн бұрын
Just to clarify! You want to spin the damper, in the video we use the bag as a method of spinning the entire assembly. As long as the bag is locked to the damper, and your lower mount has the lockring loosened up, you can use this method.
@Yhuyhu012311 күн бұрын
@@bagriders Oh I see! Thank you for clearing that up
@silent5kill3r12 күн бұрын
Did it take much trimming on the rear, rlca or anything else to tuck like this or just the kit you guys sell? Very interested in gettting my 2023 brz to look like this stanced! 🔥 my bc coils are starting to get bad so need a upgrade 👀
@bagriders12 күн бұрын
Our BRZ just had control arms in the rear, no trimming needed!
@AnthonyMoreno-ky3px12 күн бұрын
i have an 08 bmw 335i on the 3p set up what’s a good psi/ride height to be at for driving? i’m very new to the bag scene
@bagriders11 күн бұрын
35-45 PSI (Front) 70 PSI (Rear) This is what the two Air Lift manuals say, these are also downloadable here www.bagriders.com/tech/
@abhinavmangalampalli38313 күн бұрын
How can I check for rubbing or clearance without air lift? I only have one 2 jacks
@bagriders12 күн бұрын
One jack and four inexpensive jack-stands is a great option! If you can't get your hands on those essentials, it might make sense to seek out a shop that is familiar with air ride.
@coldsteeloffroad14 күн бұрын
Is that REALLY your company name?! 😂🤣🤣🤣🥹 WTF came up w/that one?! 🤣🤣🤣
@gjoniny153414 күн бұрын
i have 485 compessors which check valve should i use? i have 3/8 size hoses
@bagriders14 күн бұрын
Because the 485C uses a 3/8 NPT Male leader line, if we were going to upgrade the check valve, we would recommend a 3/8" Check valve.
@user-qj5pp3zq5l15 күн бұрын
존 나패고교도소가고십네
@bradleyglenn200615 күн бұрын
3/4 around here. 💨.
@TopNorthGarage16 күн бұрын
How would drifting on bags go?
@bagriders15 күн бұрын
A well configured suspension being operated in the correct travel ranges will work for Motorsport or for daily driving. There's nothing about bags that prevent them from being used for drifting, so go for it!
@adrianasyali162716 күн бұрын
why does the airlift make more noise when airing down compared to feelair?
@bagriders16 күн бұрын
The louder release of air is due to the popit valves that Air Lift uses within their manifold design.
@ToddtheLoneDroner16 күн бұрын
Do they make a way to fit this on a Mercedes CL500
@bagriders16 күн бұрын
Head on over to www.bagriders.com and enter your vehicle information. That's the best way to see all suspension choices.
@firefighter34317 күн бұрын
Awesome work man!!
@adrianasyali162718 күн бұрын
why is airlift louder compared to freeair? when airing up
@_takeit3z19 күн бұрын
Model of wheels and size?
@bagriders19 күн бұрын
Those are Rotiform BUC-M wheels - They are 20s but I do not know the specs.
@boyishdog12319 күн бұрын
How do you know what psi to run on the top right corner of the remote?
@bagriders19 күн бұрын
In your tank?
@boyishdog12318 күн бұрын
@@bagriders yes!
@boyishdog12318 күн бұрын
Like what should give you a reason to increase the PSI? Whats the starting level you should etc
@BarelyLegacy_Legacy20 күн бұрын
Trimming subie rear bumper stops
@bagriders19 күн бұрын
Good call!
@Xvinfajtr20 күн бұрын
pretty sure you're not supposed to remove that washer sitting on that clip. The o-ring needs something to sit against so there's no way for it to move out of place when the bag compresses
@arandegoederen21 күн бұрын
I’m hoping to convert my bc coilovers on my 1986 BMW E28
@bagriders21 күн бұрын
Be sure to reach out if you have any questions!
@arandegoederen21 күн бұрын
@@bagriders from seeing your video I feel having the option of replacing spring with bag is best option as I’ve already spent a lot on the bc-boyz Then the management system. In Australia I’ve been quoted $15KAU for complete project - insane … that’s approx €30K
@conspiracy191422 күн бұрын
Am i the only person that dont like when cars are on bag. they look broken. for me it has to be flush. a fit. tire should not go under the fenders but otherwise this car looks great. didnt know a wing like that would look good on it
@The4.6life22 күн бұрын
What are those wheel specs 🤤
@job38four1022 күн бұрын
The 11th Commandment says, Thou shall not mix inches and metric when measuring..............
@brianespejo906524 күн бұрын
Whats the size of the bolts
@bagriders21 күн бұрын
Which bolts are you referring to? Feel free to contact our customer support team for further help. 844-404-7344 or [email protected]
@jiggamanog25 күн бұрын
Yeah how about try full cat back now. My 90 ls with custom shortys and magna flow full cat sounds way better but this is good.
@unionse7en25 күн бұрын
Loctite 567 is anaerobic and sealed where normal pipe dopes would not. However keep in mind it's not recommended for plastics. Yep I realize 567 was not shown in this video.
@suspensefulness25 күн бұрын
what settings front/rear is the ride height
@bagriders25 күн бұрын
The Super Low suspension is running 50PSI front and 105PSI rear. Each kit comes fine tuned (damper length and damping) right out of the box!
@suspensefulness25 күн бұрын
how low can u ride or set the setting
@bagriders25 күн бұрын
You can ride as low as you want as long as the damper isn't bottoming out or the car isn't scraping.
@suspensefulness25 күн бұрын
@@bagriders okay thanx i had the same mustang im trying to find a low setting..i still see a big gap between fender and tire in the front
@bagriders25 күн бұрын
@@suspensefulness Having a small amount of 'tire stretch' is also very helpful if you want to ride low!
@KyleAndersonSkates26 күн бұрын
very interesting. i've always manually overshoot aired up with the up arrow on my 3p then hit my ride height even with airlift performance double bellows. old habits die hard I guess lol.
@bagriders26 күн бұрын
That's not a bad approach at all, it's pretty effective with rolling-sleeves. I've been in that habit myself.
@Nb6177727 күн бұрын
Is there something we should do about potential dry rot of the air strut? Oil the outside maybe?
@bagriders26 күн бұрын
With the suspension itself being safely out of the sun, we expect 6+ years before the slightest impact of dry-rotting. We haven't recommended oiling the rubber historically, it's not something that we've ever tested.
@anthonyhouse670227 күн бұрын
How’d you switch from, leaf springs to bags
@bagriders20 күн бұрын
The leaf springs are removed durning the air suspension install.
@backintogear907128 күн бұрын
Wheels specs???
@Thedoodahman_28 күн бұрын
I’ve seen people put bags on coil overs? How does that work? Seems like a budget option
@bagriders28 күн бұрын
Hey, we made a whole video about this: kzbin.info/www/bejne/oqKYlql7mNx6mas Drop a comment on that video if you have further questions, or call 844-404-7344
@FLiPpiNpRidE29 күн бұрын
install video otw?
@bagriders25 күн бұрын
Only thing that needs to be installed is the air chuck into your tank!
@xOpTiiXx29 күн бұрын
anything coming for ls430?
@bagriders27 күн бұрын
Yes we have complete Super Low suspension available. www.bagriders.com/catalogsearch/result/?q=ls+430 Check that out. More photos available at Superlow.com
@downnoutmotorsАй бұрын
🔥🔥🔥🔥
@PepeMorenoBerlinАй бұрын
There is something getting real hard in my pants watching this car !
@AIexHernandezАй бұрын
Sounds like shit. i love it.😂
@DanieldelzАй бұрын
Is it possible to set it up that it lowers when you lock the car and goes up when you unlock it??
@bagridersАй бұрын
Unfortunately there isn't a way. The only option for the car to immediately air up without having to press a button on the controller is when the car first turns on, its a feature called "rise on start". Most control systems also have bluetooth capabilities that you can use directly from your phone.
@carlosspringer9519Ай бұрын
If I run dual compressors...do I need two water traps
@bagridersАй бұрын
The short answer is no because we recommend that the water trap goes between the tank and manifold.