Excellent idea. I think i have those same ramps. I have scars on my forearms from reaching for the drain plug while engine was hot. (2.4L)

Nice buns 😅

Thank you!

This video was a tremendous help for an absolute non-mechanic. Thank you. 😊

I had a long crank issue and this seemed to fix it but after a few months the problem came back .

Great vid thanks

What's the best way to access the electric motor in side mirror? It stop folding sa I m wondering how to fix it. Thanks

You know, I don't know English and I was barely able to read the translation, but the method of how to change the filter was more than clear and I can only say thank you (I used Google Translate)

I have this exact same car, except the sunroof is the full size kinda that has the back part so not sure if that parts the same. However mine hasn’t had this problem yet, but if it occurs I will know where to start now.

Good job! Straight and to the point with no frills, thank you!

Thank you! Saved me ruining one myself. I’d buy you a beer if we were siting at a bar!

Excellent details. Thank you.

Thank you. I need to install sheep skin rear seat covers and in my experience it’s easier to just loosen or remove the seats to get the seat covers securely and properly installed. Mines a 2011 rx 350.

DO NOT USE THE CHEAP AUTOZONE PART, BUY FROM HONDA DEALER. Autozone part broke and is cheap. Price difference is $25 not bad for Honda original part

You didnt have to asjust the gap?

Awesome video

Dude this was hella helpful thank you

When installing the new filter you have to pinch the end of the filter that's going in the hole. You're not going to want to do this, but you have to. There's something around the top of the hole that won't let you slide the filter in normally. It's a bad design.

Thanks for the video

Thanks this was very helpful,have a good day yourself 😊👍

Got it. Well done

Thank you, only video I found with straight forward info

Man I had to look this up because I think mine is getting stopped up . Feels like hardly any airflow it coming out my vents. Gonna be checking this asap.

Just ordered my replacement mirror for my 2013 Honda civic exl im gonna attempt to replace it myself while following this video😫😩

3toSabbath We13Dec2023 AmesIAUSA 1010 🌑 🌑 🌑 • So you know: That piece which you removed is not a rocker pannel, it is a "SIDE SKIRT." The rocker pannel is the piece with the clips on which the side skirt is mounted on, the piece which you mistakenly addressed to as the rocker pannel. Again, the piece you removed is not a rocker pannel, is called a side skirt. By the way, some call the side skirts "rocker pannel guards." After reading more about it all, I have no idea if what you removed is call a side skirt, a rocker panel trim, a skirt extension or what. Seems every one has a different name for the same part. In my 2010: Honda Fit Sport, the outer part of the lower side trims are fiberglass, so is the inner part on which it is mounted on. Now I don't know which is which. I was under the impression that the outer part is the side skirt, which is mounted on to the rocker panel. But apparently the Rocke Panels are made out of steel for support. The side skirts are for air flow and made out of fiberglass or strong plastic. So are the side skirt trims. They make it confusing for marketers to charge you more. It's all a scamers dream boat. Thank you. 🌑 🌑 🌑 💚💚💚

Now that you have taken the rocker guards off, you can now cut off the rusted Rocker Panels off which is not shown in this video, the Rocker Panels are made of steel.

Good video except I would recommend the slack on the strap ought to be rolled up and not able to fall down under the tire while driving

Thanks for sharing

Thank you 🙏

on my car the grey cable appears to be stuck to the roof. can you tell me how to take it down? something is holding the cable and i cant get my eyes in there

Can u put link of it. So i can buy it thx

That’s a brutally honest explain of exactly what did. Shocked mechanic so direct! I’d trust him. Thinking customer hit reverse, or swap out cheap steel wheel, upgrade used. Blast or electrochemical reduce oxides, prime paint or bare metal Throw in Nickle or chromium, tank or Palladium Platinum Gold but for catalytic chemistry not Mexican 5.7 $250.00 to 10k piercer 15,250 unit profit. Pity can’t pay them, paint’s👌🏻

West Chester, Pennsylvania or 🗽 New York? Can you work on Mercedes Benz Unimog or Mitsubishi Fuso Fg, Commercial Trucks? Cab over COE bed small box, rates? Did you purchase a Reverse Trike used Slingshot ATV Rt Snow air engine manufacturer? Cheers, Lauber St. Judge Crane Terrorism if stop by Secretary will know Eight 26 . Hour rate contact I’ll provide through here if respond. Buying all Commercial Trucks all wheel or 4x4 from 4x dually, any Diesel TD, manual prefer, auto any Petrol/ Hybrid Hino, mechanically sound look are not important. Travel Pan American, My LLC will absorb all. Perhaps consider or if colleagues, associate, low clientele needs work. East or west coast but NOT commercial truck manufacturer sales. Won’t use them. Well explained, elegant in chemical literary sense. Fast to point, penetrate, lube 2x # torx, toraue down anticipated cut off dumb questions! 👍🏻 Thank you Sir!

Great video! Perfectly explained, thank you.

Cheers! I would have absolutely done the same thing to mine! 😀

My hubby and I got this done together in under 20 minutes, Thank You!

What maintenance is required for the wheel hubs?

Me: working at a dealership: watching this😂

Just broke my antenna completely in the car wash. This video was encouraging and now I'm ready to pick up the new antenna and get the job done 🙂

Thanks for the video. Made it easy for this 58 yr old lady to do in 20 minutes.

My tire strap snapped because it was too tight. And when you make a turn it puts a lot of pressure on the straps

Dang, we watched his video, and no one got any replies back. That's no kool

Too late for me, but now I know that by watching your video. I also had to get my engine air filter changed, too

Bro this is genius lol

Thank you! We did it! Very proud of ourselves. It's my daughter's car and we did it together. With your help, she basically did it all. 16 years old! Thank you.

Now i need the center console GLOVE BOX removed..i just see 4 screws on the inside top of the glove box..KIA SOUL 2010 SPORT

THANK YOU..for the short and simple back seat removal..

Thanks for this! My passenger door has gotten so bad I can barely slam it shut even from the outside. It's even hard to open all the way like you mentioned. Glad to see this is a quick and easy project!

How did it get so dirty, mine is the same with only 8700 miles. Nissan just cheapin out on their air filters

Thanks for all the help! I'm installing my mirror right now! You make car repairs fun. 😀