Hello, which masking tape should I use? Does it leave any sticky residue behind?
@Northponder2 жыл бұрын
Dude, use blue masking tape. Works perfect every time.
@markconde6942 жыл бұрын
Dude- Blue painters tape will work. But… Masking used in the video is faster to apply and is more cost economical than blue painters tape.
@iaxl2 жыл бұрын
How to buy this paper?
@graceland752 жыл бұрын
Thanks, great information, question, where do you get this 12 inch masking tape?
@markconde6942 жыл бұрын
Both JDS Industries and Johnson Plastics Plus carry it
@heveslaserengravingchemica54763 жыл бұрын
A productive alternative is to use chemicals to concentrate and enhance the laser beam, and at the same time incorporate dyes in the substrate. It works on plastic, metal and other materials.
@alanbyram60153 жыл бұрын
How come the piece of wood that you take the masking paper off, is different to the one you started with, I think this is a con, Stay with the original engraving. You actually started to paint the letter 'K' but on the final engraving there was NO 'K'.
@Dave-ni4vg3 жыл бұрын
Yes where do you get material what companies want to use what you use
@P.Olegon3 жыл бұрын
Thanks! Perfect method. But, what is the paper you glued first? Where people use this paper? I have not found in Russia this material.
@katiekelley39843 жыл бұрын
Where is the link to the materials and patterns? I'm interested in where you get the mask from
@msyverson33 жыл бұрын
you can go to a sign supply store and ask for pre-mask. It is used quite frequently when applying self adhesive graphics. It's bascially 12" (or whatever width) masking tape.
@zenithenterprisenetwork83103 жыл бұрын
@@msyverson3 Thanks!
@isaacvaldez67573 жыл бұрын
greetings from Holland, MI!
@stephensharma32594 жыл бұрын
what ink is used here
@isaacvaldez67574 жыл бұрын
what font is that?
@FirePointCreations4 жыл бұрын
Harrington
@lasermania68054 жыл бұрын
Awesome work, great video 👌
@RJMachine624 жыл бұрын
Something that really helps stop the bleed thru or fuzzy edges it to spray or put the clear in the etched marks, then let dry then color fill. This will not only seal the edges of the mask, but also the open wood capillaries. This keeps your infill colors contained to only the unmasked area with no bleeding. Works great. I use a plastic edge like a credit card to smooth out the edges when the mask comes off.
@giantchriss.stovall-lopezi35814 жыл бұрын
Do you have a link to the mask material?
@claudionascimentodesouza31074 жыл бұрын
Thanks!
@tonecas27354 жыл бұрын
where's the laser
@FirePointCreations4 жыл бұрын
Antonio Florinel Costea watching the laser is boring and not meaningful to the colorfill process.
@tonecas27354 жыл бұрын
@@FirePointCreations the title is wrong
@tonecas27354 жыл бұрын
How to color fill with stencil
@rickmccaskill78885 жыл бұрын
Thanks for the video. Where did you buy the mask?
@FirePointCreations5 жыл бұрын
Rick McCaskill I like JDSindustries.com. Search for paper transfer tape- med tack
@cavemanworkshop5 жыл бұрын
Why not use an enamel spray paint? It would be much faster.
@coolchick5685 жыл бұрын
I just spray mine- much faster and easier, is there a reason you don't just spray??
@FirePointCreations5 жыл бұрын
jodi berning spray paint is very thin and is prone to bleed thus ruining the project. Heavy body paint prevents bleeding.
@Tuffenough4u5 жыл бұрын
Get you some chalk paint! They sell the chalk mix on amazon "calcium carbonate". some use plaster of paris on the cheap, and there are a load of videos showing why it's the way to go, explaining how it acts as a molecular pigment binder so the coat can be very light, yet still hold it's opaqueness and will dry at 3-4 times the speed of standard paint and be twice as durable. Also, it you want to cut the time almost completely out, invest in a drum sander plainer, or build one. It takes all the work right out of weeding and cleans up any bleed at the same time. Have fun! Here's a link if you're the DIY type kzbin.info/www/bejne/qKCxYmSKrrhorsk
@stugauju5 жыл бұрын
you should stop smoking because its very hard to watch video when you breathing like that it is very anoying
@laserup94265 жыл бұрын
thank you for your concern. I sincerely appreciate the feedback. Interestingly, I have never smoked. Again thank you for your concern in my health. I am soooo sorry I annoyed you. I will try to do better-- just for you. Because you deserve the best. you deserve to not be annoyed.
@FirePointCreations5 жыл бұрын
I did not show it being engraved because that process is very boring to watch. There’s not much to see. It would be like watching paint dry.
@pauledwards38335 жыл бұрын
why didnt you show it being laser engraved instead of just putting the "mask" on the wood
@Checkitfirst5 жыл бұрын
Just a bit curious. Doesn’t a laser usually leave the engraved part black
@kevingamache15125 жыл бұрын
Ive always lasered the object then painted then sanded and the etch is paint filled and the rest is back to wood. The method you use here i used in a modified way for two or more colers of the exterior and maybe the etch. Good video.
@thebeststooge5 жыл бұрын
Wouldn't spray paint be better for this since it is like stenciling?
@parvezuddinansari10445 жыл бұрын
Nice #Irfaninfotech
@bhenson0015 жыл бұрын
What font was that? the wife loves it
@lonerangercowboy94655 жыл бұрын
Nails on a chalk board moment.... YIPE!!!! LOL .. great video
@txgabe74655 жыл бұрын
Why don't you just use a couple light coats of spray paint? You are getting bleed through because you are painting it in. Good job if that is your thing.
@Fortniteandfootball-325 жыл бұрын
is it general use masking tape? or is there a specific tape used? thanks
@hankdafishtanka9436 жыл бұрын
why not just screen print it?
@laserup94266 жыл бұрын
It’s not cost effective to screen print one piece. Plus it’s nit the look I’m after.
@428ghost6 жыл бұрын
An option for preventing bleeding: while the mask is still on spray in the engraved areas with the same finish to seal the engraved areas, THEN do the colour fill. Some woods are prone to more bleeding than others so seal/paint prevents a lot of the cleanup.
@keithmiller98616 ай бұрын
any problem getting the paint to stick to the clear cover?
@428ghost6 ай бұрын
@@keithmiller9861 To date, no. Always enamel on enamel. haven't tried mixing acrylic with enamel to see if there's any drama.
@ricardodesantiago13756 жыл бұрын
it's that masking tape?
@GeppettoCreations6 жыл бұрын
What is the brand and model of the mask that you use?
@laserup94266 жыл бұрын
GeppettoCreations we use JDS Industries
@j0hmama6 жыл бұрын
Are there any way easy ways to go from text to vector cuts ? I want to make stencils.
@laserup94266 жыл бұрын
Eric Lovejoy stencils are fairly easy if you have a laser to cut them. Turn text into an object in your graphic software like Corel Draw or Illustrator. Use Mylar for the stencil and cut on the laser
@oregonhomebuild94506 жыл бұрын
Not if its urethane based.
@laserup94266 жыл бұрын
Not many folks cutting vinyl are also going to stock Urethane based "vinyl. And a paper mask is significantly less expensive than vinyl or urethane. But yeah. It will work. There's always more than one "right" way. Thanks for giving everyone options.
@oregonhomebuild94506 жыл бұрын
I dont understand why your not using vynil paint mask. It bonds better and wont be effected by the paint.
@laserup94266 жыл бұрын
Abram Heard laser Engraving or cutting vinyl is harmful to the laser and humans
hej! where do you buy that wide masking tape. need it:) thanks
@gallahant6 жыл бұрын
I was wondering if you could use frisket film instead of masking tape.
@andreejmarbbf526 жыл бұрын
The project like this step by step is described on the Stodoys website and many more plans you can find on that website.
@jessicasommy17416 жыл бұрын
work has never been as easy as with Stodoys instructions.
@МарияСергеевнаКуликова6 жыл бұрын
Endurance have create a new 8.5W+ laser... Infinite power: can engrave on a stainless steel, aluminum, copper, etc. kzbin.info/www/bejne/nqeXYoWNmM1kpZo
@Peeremoghan6 жыл бұрын
Sir, You could have sprayed this with a normal spray can. It gives the same result but the spray of course works faster.
@MentallFloss7 жыл бұрын
the outdoor oil you apply is a kind of varnish, right ? and you apply it before engraving, correct ? I'm trying to do the same on pine wood with no finish with acrylic paint or oil paint and the bleed goes quite deep I have to scrape quite deep in the wood and it ruins the piece I'm guessing the oil or varnish makes the difference, have to try it later Thank you nice video
@laserup94267 жыл бұрын
Applying to exterior grade oil creates a smooth finish that allows the mask to adhere to -- then you can engrave and color fill--- easy peasy.
@raynikkel15017 жыл бұрын
Thats the way I did it 15 years ago, now I put a good 3 coats of finish on the wood first. then engrave, paint entire wood and wipe off the paint from the un-engraved area and go over everything with a light sanding after to get the paint that didn't wipe off, I also give the entire sign another coat of finish so the painted design also has protection. Good video, it's great that people share their techniques
@mia91181903 жыл бұрын
Sorry, what do you use on the first 3 coats?.thank you
@raynikkel15013 жыл бұрын
@@mia9118190 water base Varathane
@dapoopta7 жыл бұрын
At what point do you seal it?
@markconde6947 жыл бұрын
dapoopta I do not seal it with anything. At this point it's already sealed. You are good to go
@dapoopta7 жыл бұрын
mark conde thanks!
@lawrencekelley5067 жыл бұрын
Hello, New to all of this, where do you get the "MasK" and what is it's name for me to order some ?? Love your video, keep it up :-)
@markconde6947 жыл бұрын
Lawrence Kelley I get mine from JDS Industries. But you can also get it from Amazon. www.amazon.com/gp/aw/d/B017URUT92/ref=mp_s_a_1_4?ie=UTF8&qid=1505065369&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=paper+transfer+tape&dpPl=1&dpID=31gtwDMQHpL&ref=plSrch
@Kkyak116 жыл бұрын
Thanks so much for the link~! Just bought a laser and was searching for this.