put a C ring inside the nut and use set screw to lock it on place. So you can disassemble and change the combo. or just create a set of 30 nuts.

Too few combinations.

the idea of ​​this lock is smart and stupid at the same time. If we rotate the first gear until we reach the gear slot, the latch will slide forward until it stops in front of the second gear. Then, if we rotate the second gear until we reach the gear slot, the latch will also slide forward, leaving the last gear in front of it. So we do with it as We did with the first two gears. thus, the effort of making this lock was wasted by just thinking about the mechanism for opening it. Greetings my friend from 🇱🇾

Trop de boulot pour une economie de bout de chandelle Exercice utile dans un lycee pro toutefois

Відкрию за 6 секунд !

You should use countersunk bolts with recessed nuts and locking nuts on the other side of the door and frame, instead of screws.

Aare ye tu sab ek line me he Banya koi bhi ghumakar laga sakta haaaeee

The project is good. But how do you get rid of leftover liquid from cans during the collection and storage process until compaction? that cause a lot of dirt and bad smells?

A good idea may be to screw a solid metal plate on the wood and weld this lock over it. Then no screws are reachable. Even though, someone who has a good ear can detect the click, so…

A palavra que eu vou usar é incrível.

Eu gostei muito sobre mim daqui de Recife

This video is fantastic! The DIY door latch idea using bolts and nuts is both creative and practical. Thank you for sharing such innovative content. Keep up the great work!

So simple you need a welder and a pillar drill????

É mais fácil comprar uma pronta.

Ideia brilhante parabéns

Muito bom mas podia ter deixado um espaço maior pra amassar outras latas também não só de coca

Big and ugly hinges proper ones are cheap to buy anyway 😂

Construí um kzbin.infoZ5iU-gYy--I?si=CUlATss0FLAfwsBt

diy?? doit yourass??

Valeu da ideia ,salvou final do projeto aqui,grande abraço

great idea for keeping kids out of the pool area

Calls it DIY...makes it in a machine shop.

Top

Hopefully you'll make one where you can use key to lock it from the inside and outside. Sooner

Hopefully you'll make one where you can use key to lock it from the inside and outside. Sooner

Great, thanks for sharing

Iska piraj kitna hai

6-6-6, ça donne le chiffre de la bête d'où la nécessité de rajouter 1 écrou qui offrira davantage de combinaisons.👍

Facil y eficiente ,excelente

Столько нарушений ТБ. Люди все с пальцами? Качество - на "отвали", т.е. уровень ниже среднего...

Мастер 100% не профессионал в своем деле, хоть бы часы снял при проведении ударно-вибрационных работ. Они, часы, поломаться могут от частого сотрясания. Вот бы посмотреть на изобретателя при морозе -40 во время снегопада. Пусть откроет свой "замочек". Способ один, быстрый и надежный - обычная монтировка. Тем более на прилегающей стороне сточили края, так сказать для "эстетики", но скорее всего для более удобного зацепа.

szkoda roboty na 3 cyfry klodka jest dla idiotow otwarcie jej to gora pol godziny na 4 cyfry rob bo to juz kilka godzin

Quanto custa uma dessa

Anyone can open this combination , very primitive , Must be Russian 🤣🤣🤣🤣🤣🤣🤣

avec un tournevis, bye bye le verrou

You need a new battery in your clock

This is not safe, the screw can easily remove by the thief, i prefer enclosed the left side locking mechanism

Você faz pra vender eu quero comprar uma

घर तक पहुंच जाती है क्या

क्या प्राइज

하나설수 있는 지요 하나설수 있다면 가격은 얼마나 하는데요

지금 만들어진 것 가격 얼마나 하나요

가격은 얼마나 하는데 요

😅😅

jadi insfirasi

Deus o abençoe! 🎉🙏🏻🙌🏻

Hi thx for a very informative vid. ❤❤

I disagree here. You have more invested than the can crusher costs,poor man has poor ways,but poor ways make a poor man.

Lame

Very good just needs some hardening to be preventing it from bending and broken.