i can guarantee your likes and subscriber will explode after😂

I'm not 100% sure. The cameras are married to the motherboard, meaning you can replace them at will. Though I do have a software that can replace DJI camera with the same model of drone. DJI Mavic 2 Pro can switch between the Standard and Zoom. It might be possible to swap the actual lens inside but I haven't really looked into that but I doubt it is possible.

Did you ever end up cleaning it out?!

I think your right, the dust bunnies is undeniable lol

I have two different services, just the blow out of the vent and PSU is $70, full internal and external as well as thermal, and liquid metals $120

Just $70 for this model.

I planned on making one but I got lost in the sauce lol

@ChattFix I'm subbed so I'll be seeing it. Keep it up dog and take it easy.

@@ajcollins5914 thanks for that! I'm planning on rearranging my setup to make it easier to work and record. One I have that I think I'll be making a lot more content!

@ChattFix just know you are making a difference and helping out. Make yourself comfy. No reason to be stressed out. My advice is for you to enjoy yourself while making the content, your environment really matters. So don't ever think you're doing to much.

@@ajcollins5914 thanks for that it means a lot. The only stress I get is when I get being on my repairs and have to play catch up! So hopefully I have a better workflow to help me do more videos.

I would check out ifixit.com and look at the instructions. If you feel comfortable go with it, just take your time and get the proper tools like the security torx drivers.

Likes your comment but doesn’t reply

If you want hands on, I would find something already broken and take it apart learning where to grab cable and see how to dissemble and then reassemble. Then I would go to ifixit.com and look at their step by step process and you should be more comfortable by then.

@@elverrodriguez2510 Haha thanks for pointing this out. Not sure what happen to my comment but I added it back!

I would purchase and air in a can from walmart, typically come in a 3 pack, and spray it out 2-3 times a month. Set a reminder on your phone, easiest way for me to remember.

They are all over amazon, depends on what size you need though. www.amazon.com/s?k=silicone+work+mat&crid=394KXSKPOY0RB&sprefix=silicone+work+ma%2Caps%2C129&ref=nb_sb_noss_2

It always makes me nervous when the Xbox does this. If the SSD fries, its a death sentence!

Why?

Vacuum?

Me too I wanna know

Sorry I aparently had notifications turned off for comments. I charge only $70 for this model.

$70 for this model!

going to do more of these when I have the time.

Always have to with these older models. It just dry and nasty.

@@ChattFixXbox 360 s uper nasty To Xbox 360 s uper sleek

@nateplummer938 I got a few more that I need to do and I'll be hacking them to run off the hard drive. As well as the 360 E's

Just now seeing this! Gad I was able to take care of it!

I think I had it lower than it should have been if I recall. I have since upped the temp and it come faster haha

Where? To the back deck or here to get your console repaired 😂

@@ChattFixhere to get my console repaired

Nevermind I turned it on its side i think it's just pressure

Haha sorry I think my notifications were turned off I missed a lot of comments. Does it work better now that its on the side? You could try and get some rubbing alcohol and see if that works.

Right?!

Thanks ✌

Sure can! The port typically is damaged on the board as well so I more often than not replace the entire board. Email me at [email protected] and I can take care of you!

Sorry for missing your question. Basic solder repair is $70 before taxes. Send me an email at [email protected] for any questions.

@@ChattFix Thank you very much for the reply, this really helped me out

Sorry there was a typo on the email address. [email protected] is the correct one!

I thought I uploaded it!

How did it go? I think I have one with the same issue. Looking to replace the motors.

@@ChattFix will sound crazy. But it crashed one more time. And falled from a tree. Not suffered so much damage but the black base moved from its position. So I put it in with the tab holding it. And the shaking is gone xD Suspect before the base wasnt holded by the tab so even when it was landed shaked because armonics vibrations haha

I’ll post it!

You can always tell!

@@ChattFix just imagine putting that into your body...

I remember in school when they had those lungs that were from a smoker and a non smoker. Always stuck with me haha

@@ChattFix I've cleaned some nasty pcs in my life one smoker had a grease like tar slick in the bottom of their pc. They must have been smoking a tar pit. Their pc fan was destroyed. It permeated everything. Had to put Vicks in my nose to finish it.

@@nwheatcraft I have actually cleaned a PS4 with exactly what you are describing, Crystallized and everything. I cleaned it and it still worked, I was amazed.

Haha your not wrong!

Yeah let me check. If I can’t find I can just send you one. I bought a bunch for that very reason

Here is the link. If you will only do one, you can just buy the entire board from Amazon for like $15 if you just want to swap the entire thing. Just found this amazing item on AliExpress. Check it out! US $6.60 | 10pcs/lot new Original New for Xbox One S/ X Power / Eject / Sync Tact Button Switch a.aliexpress.com/_mNSXfve

www.ifixit.com/products/xbox-one-s-rf-board-and-ir-blaster?pk_campaign=%7BPMax:US%7CShopping%7CSSC%7CParts%7CtROAS390%7D&pk_source=google&pk_medium=cpc&pk_kwd=&gclid=CjwKCAjwyqWkBhBMEiwAp2yUFr9kd_tm7mjecS_hZIIffAInW-387ElBvYR_UEwW7i8FE_wu8ZAN-BoCTJwQAvD_BwE

Haha that would have actually helped! Covid has got me all tore up haha

That’s what I want to do for the customer but everyone I reached out to couldn’t help. So this is a temporary fix.

That’s exactly it. My wife has to keep pulling me to leave because I really enjoy it! Sometimes to much haha

Haha that’s a pricey screw driver just for having the ratchet feature! Have you used it?

What that tells me is they didn’t get down to the vents. You have to remove the motherboard and the metal plate underneath in order to get to the vents! It’s a few more screws but if they aren’t aware, what they did won’t help!

@@ChattFix thanks for the help! Think i can do that myself?

@@3MinutesD what I would do is go to ifixit.com and look up your model PS4. Look over the steps to get down to the Fan. Typically the fan is the lowest part on the console. You are looking to get to the lower EMI shield and heatsink. If it looks like something your comfortable with give it shot. What I would recommend is also watching a video as it helps as well. The biggest issues is making sure your cable and screws are put in the correct place and going slow. Since you have new thermal paste, simply get the excess either with a tooth pick or something plastic and rub it back over the APU gently and you should be fine. Let me know if your not comfortable and I can do it for you cheap since you already had it done.

​@ChattFix What a Chad

How much they charge you?

Haha I’m working on an Xbox 360 Slim that will probably be close to yours! Just waiting on the parts to come in and I’ll get it posted 😂

Ong,☠️

Opened mine up after 14 years and it was spotless. Just depends on the environment.

For that only haha

It does, I always recommend to either have an air in can or use a vacuum. Always use these when the console is off but regular maintenance helps.

Yes, we are in an era where KZbin makes everything seems easy. Then you have someone fix your issues and it costs more just like this one haha.

Were all underdogs in our Mom's eyes 😂

Sorry I didn't see your comment! No I have not had an issue either way.