@@jrus1 oh OK. I'm. Getting told 30 amp for the green fan fuse. All v confusing this 😳
@al3ay311 ай бұрын
thats because disc brakes are cold, after a while it should go away. It´s common in some cars
@jrus111 ай бұрын
Nope happens all the time when slowing
@donaldgeterjr8180 Жыл бұрын
Your cmc rod is going in not aligned properly
@Luka-te8gk Жыл бұрын
Lower control arm.. Had the same issue.. Went to a dealer they changed it since it was under warranty and the noise is gone.
@farhanaseer893 Жыл бұрын
App link please
@jrus1 Жыл бұрын
just go onto your app store and type "YUNMAI" you'll see it..
@Davidityourself Жыл бұрын
where was the valve adjustment, misleading title but good video
@ffjohn7603 Жыл бұрын
What paint did you use for the calipers?
@jrus1 Жыл бұрын
they were powdercoated it was called SUN GOLD
@wattjob69 Жыл бұрын
Did you ever figure out the 660-720 rpm issue bro? Mine is still stuck there after new spark plugs however rpms aren’t bouncing as much. Still wish I could get it stable at 780-840 or something around there. Let me know if you found a fix plz
@wattjob69 Жыл бұрын
(2001 TT 180)
@jrus1 Жыл бұрын
@@wattjob69 no i haven't and i dont have the car anymore. have you posted a video to yours?
@NoStars286 Жыл бұрын
There is an o ring that sits ontop, im not sure if it is that connector specifically, but you can find more information and take the assembly off and check it out
@jrus1 Жыл бұрын
yep. i got it
@shawnstephens2532 Жыл бұрын
Thanks. Tried this and fans kicked on. I couldn’t pull the fuse. Another you tube poster said he replaced that fuse box. Found used on eBay.
@jrus1 Жыл бұрын
Ultimately that was the end goal to do, but for the simple fix meantime, do that
@dc5hnl110 Жыл бұрын
mine has it too.
@jrus1 Жыл бұрын
mine is gone now,, try CRANKSHAFT sensor relearn. but you need a good scanner to do it..
@gunner678 Жыл бұрын
Very useful, thanks!
@jrus1 Жыл бұрын
Glad it was helpful!
@jordiperez9035 Жыл бұрын
Master cylinder can be messed up as well as maybe your clutch switch sensor can be adjusted wrong sounds like a clicking but you’ll also notice a noise if you follow the clutch lines from the master cylinder to the slave cylinder which connects to the clutch fork Your clutch fork is what squeaks and it may just be time to switch out the system might be better to run cmc ep1 system
@jordiperez9035 Жыл бұрын
Me today
@suave6565 Жыл бұрын
Mine does the same on a 2005 vw touareg v8.
@prestonthongvilay2376 Жыл бұрын
Where can I find that bolt that actuates the parking brake? Looking to replace it and have had no luck in finding it. As shown at 6:45.
@jrus1 Жыл бұрын
they MIGHT sell it separately. or, try and find used junk calipers and steal it from them
@pieushnautiyal90622 жыл бұрын
Was this issue resolved for you ? I am facing the same issue with my 2022 Tiguan, which the service centre say is an operational noise. What was the resolution ?
@jrus12 жыл бұрын
still kinda does it. not as loud...i dunno..
@PlushkaAlisa Жыл бұрын
Mine does this too!
@antonymathew2 жыл бұрын
I have the exact same noise in my brand new VW Taigun ( India ) can i know what is a pass wheel bearing is ?
@Trekvlogs28412 жыл бұрын
I have also the same problem with my brand newVW Taigun
@antonymathew2 жыл бұрын
@@Trekvlogs2841 there is no solution from service center.. all they do is apply high temperature grease on the wheel bearings
@kevstersgt40002 жыл бұрын
Did you end up fixing it? What was the issue?
@jrus12 жыл бұрын
Well, not really. I just put in a new battery and, i think the crank time has lowered to about 1ms less or so . i also cleaned out my injectors. I also did a valve adjustment
@karlhaberl802 жыл бұрын
Did you find a permanent fix?
@jrus1 Жыл бұрын
You gotta replace the box itself
@eze80242 жыл бұрын
Just muffler or full catback?
@jrus12 жыл бұрын
Just Muffler, it's from TYPE-R :)
@thekeysman12 жыл бұрын
have basically the same noise, they tried to fix it a few times it went away for a while, now its back, replaced the rear brake shoes, etc rear hub assembly?? Did they ever figure out what it was? I have a 2011 VW Jetta
@huachenchen98172 жыл бұрын
My vw Tiguan (2017, 30k miles) had a same noise. In my case, Turns out it was one of the brake pedals inside that completely worn out, so the metal hit the rotor and made the sound. Very strange situation as all the other pedals were pretty new.
@paulzamora48642 жыл бұрын
The abs light comes on for a bit like yo-yours did. Would that be a problem?
@jrus12 жыл бұрын
Normal for you to see the light for a few seconds then shutoff. Sub to my channel guys
@Varshan1302 жыл бұрын
Is this the same procedure for an 06 Acura rsx type s as well?
@jrus12 жыл бұрын
yes sir! consider subscribing.
@martinbullla76542 жыл бұрын
My car has done the same thing it's more than likely the rim not being completely centered on the Hub I had the same problem with the same exact car and if you don't wire brush the hubs to get all the dirt corrosion rust whatever off before you put the wheel on you're going to have vibrations and those don't even look like factory wheels those are just steelies
@jp5547313 жыл бұрын
What is that pink lube you used for the parking brake rubber seal? Can you use this for the piston rubber or did you use something else?
@jrus13 жыл бұрын
this was the info: 3 types of grease: orange for the sliding pins pink for the dust boot silicone for the other boots.
@jp5547313 жыл бұрын
Link to where you bought those cir clip pliers?
@jrus13 жыл бұрын
here ya go: www.amazon.ca/gp/product/B00R7OS1E4/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
@t16incho3 жыл бұрын
Did you change anything else apart from wheel bearings? I change both wheel bearing and the noise still there =(
@jrus13 жыл бұрын
front control arm bushings. mine subdued a bit.not bad now.
@leroyalexander54343 жыл бұрын
Where'd you get the sub harness from?
@jrus13 жыл бұрын
local guy parting out RSX's . you;re best bet
@isaacibarra6803 жыл бұрын
Yes it’s going to be your CV axles it’ll feel like a really bad vibration and a loud noise as you’re driving randomly that happened to me on my Chevy 2500 4 x 4 people try to tell me it was my driveshaft but it ended up being both of my front axles. And if your car has bearings I suggested to change those out to because the vibration that the axles create inside the bearing also throws them out of whack and that will solve your problem👍🏻
@t16incho3 жыл бұрын
Any update on this? have the same problem.
@jrus13 жыл бұрын
We replaced the pass wheel bearing now noise has gone
@efrainguzman27243 жыл бұрын
What’s the part number to the rebuild kit and where did you order it from??
@jrus13 жыл бұрын
here ya go! 01473-SV4-010 Will also link it in the description for everyone else.
@efrainguzman27243 жыл бұрын
Where did you order it from and how much??
@jrus13 жыл бұрын
From Honda dealer. I’m in Canada so pricing will be different. I paid $30 each
@efrainguzman27243 жыл бұрын
You mean to tell me the OEM seals will work with the Brembo rears??
@jrus13 жыл бұрын
Yea they will. All the same
@DiaconescuAndrei3 жыл бұрын
Can you play music from your smartphone?
@jrus13 жыл бұрын
honestly.. not sure haven't tried
@encontrateaccesorios75023 жыл бұрын
Hi, i have the same problem in a 2019 vw tiguan you find what is the problem?
@jrus13 жыл бұрын
we replace the wheel bearing and the noise is gone believe it or not..
@Lorant3514 жыл бұрын
Mine does the same , have you managed to find what is the problem ?
@jrus14 жыл бұрын
not yet. we just replaced some front control arm bushings and i thought it was that, but nope.
@jrus13 жыл бұрын
update. so part of that noise was because our wheel bearing was bad
@pulidojorge364 жыл бұрын
I have the same key in my rsx bought of Ebay and it was just cut and programmed both key and fob work fine www.ebay.com/itm/Blade-NEW-Flip-Switch-Remote-Key-FOB-Keyless-For-02-06-Acura-RSX-03-05-NSX-KR/184348029862?pageci=faa9e8c1-9a14-4c0b-a4f7-c3ee52e180f9
@athaothao28804 жыл бұрын
rsx type-s exhaust revs
@jrus14 жыл бұрын
Type-R muffler too ;
@jordan_.zx10r4 жыл бұрын
My oil light stays on for a few seconds after cold start. Hope it’s nothing bad
@jrus14 жыл бұрын
weak oil pressure, pressure switch or low oil.. did you check your oil?
@jordan_.zx10r4 жыл бұрын
Gianni oil is good. Only does it when cold start like car sitting for 2 days
@jordan_.zx10r4 жыл бұрын
Gianni honestly it never comes on When Driving it’s prob fine
@SoJ1RoTV4 жыл бұрын
did this fix your SRS issue? currently having this problem on my 04 rsx
@jrus14 жыл бұрын
Well I have 2 codes with mine so it should have fixed the first code.
@SoJ1RoTV4 жыл бұрын
@@jrus1 what are the codes you have?
@jrus14 жыл бұрын
@@SoJ1RoTV 09-4 15-1
@urielortiz36674 жыл бұрын
I just got the same issue. My type s Is fully stock and the clutch was never changed. I just started to hear the noise do you recommend getting an OEM part?
@jrus14 жыл бұрын
it's the master cylinder.
@manutije63534 жыл бұрын
alguien que me ayude en conectar el bulto ami radio alpine ida x200
@yimulan83435 жыл бұрын
my honda civic hybrid slow rpm and wheel vibrations problem plz any idea?
@jrus15 жыл бұрын
could be anything really to cause vibrations, but actually witnessing something on the car which MAY cause it is a start.
@laurentiubanac62455 жыл бұрын
you need new tires
@tomnogaro5 жыл бұрын
did the new axles fix the problem?
@jgizzy5 жыл бұрын
Did you feel the front end/steering vibration only at certain times? My RSX will be smooth on the highway for a while then suddenly start to vibrate violently. AND when I apply brakes the vibration increases, almost the same feeling as warped brake rotors. Are these symptoms matching your own?
@jrus15 жыл бұрын
Mine happens steadily from 110km and gets more violent as the speed increases. Tires are new, been roadforced also, alignment i got done not long ago. i just changed the lower control arms and the rear motor mount. it's not as bad, but still there.. looks to me you have warped rotors , when i hit the brakes. nothing changes.
@jgizzy5 жыл бұрын
@@jrus1 thanks for reply. I would normally agree with warped rotor theory if the vibration only started when on the brakes but the vibration only starts suddenly when on the highway never even touching the brakes. Weirdly it tends to happen on the bridge itself which makes me wonder if a harmonic frequency sets it off. Once the vibration appears on front right it becomes more pronounced if I apply the brakes. Very odd and unsettling.
@mrbigbuds1745 Жыл бұрын
Hey I'm having the same problem it only happens out of the blue from 40-60 mph for a minute I can't figure it out tbh
@mrbigbuds1745 Жыл бұрын
@@jgizzy Hey I'm having the same problem it only happens out of the blue from 40-60 mph for a minute I can't figure it out tbh
@mrbigbuds1745 Жыл бұрын
?
@damnjay_youmadethat5725 жыл бұрын
Same noise in my car what’s the fix ?
@toysandcollectibles74-365 жыл бұрын
Nice Video. Please Sub to Sub + like # 51
@jrus15 жыл бұрын
done
@DC5RParts6 жыл бұрын
I've been looking for something like this! Thank you for the video! hope to see more videos in the near future.
@jrus14 жыл бұрын
subscribe my friend if you like RSX content. ;) i sub'd you
@gaboaaa236 жыл бұрын
ive read its some kind of a spring that winding and touches some metal part arond the spring. So the metal part around the spring should be covered up with some sorft material so the spring dosnt touches the metal anymore.
@jrus16 жыл бұрын
I changed out my pedal and the CMC , it doesn't make the noise anymore.