Might have to email Prinsu to ask, some older models of rack do fit newer trucks, but you gotta ask. Hope that helps.

Thank you, I am really proud of how it turned out. SpinalCell was correct, I had to contact Prinsu directly to find the correct mode, and It is the same model as the one for the Prior generation Ford. I would still call Prinsu to have them actually select and send the right one. When I talked to them about it they had not had access to a "21 F150 to do test fitting, thinking about it " if the shoe fits' situation.

The awning foes for about $750, and the walls sell for just about $300 USD

Yeah, I don’t think anybody really anticipated they’re being that much snow.

I’ve been using the SwitchPro 9100 and I’ve really enjoyed the switch panel. However when I do the give away build next year I’ll look into the Aux Beam panels.

It definitely was an experience for her. I think it left a lasting impression, and brought her into the off road rabbit hole

There's a little recovery action about halfway through, its life changing!

First off, Thank you. Secondly many of the products I've purchased over the years have had something to do with Chinese manufacturing at some point. However if I am referring to something as Chinese junk I didn't pay for it, and my wife most likely got it for free through the Amazon reviewer program. Instead of tossing the products I try to give them a fair shake, but most of the only last 3-7 uses before they crap out which is why I call them Chinese crap. I figure I can still use a products that were received for free with the premious that I would review those products and still refer to them as "crap", or "junk" because it is my honest review of the product. There are items that were received, reviewed and found to not be "crap". I do understand your point though, be the change you want to see.

It was a 2" level puck from Les Swab

It seems simple but they are really handy.

Would you be interested in a 45 min vid detailing all the equipment?

yeah I found it, thanks for the heads up

that is pretty bad when we have to look up something you should have had

Figured it out

Hey thx for the clarification, ill work on a retraction

F R S is half a watt 1 through 14 on F R S channels 15 through 22 are off repeater channels for THE G M R S and repeater channels are 15 through22 and require a licensee to use.

I hold a 2024 G M R S licensee and that is the way my radio is set up.

@@donalderickson-si8ww Very wrong

@@donalderickson-si8ww I've had my GMRS license since 2012. FRS is up to 2 watts on channels 1-7, 1/2 a watt on channels 8-14, and up to 2 watts on channels 15-22 in the U.S.

Its always in the truck, thing its crazy sharp

We enjoy it a lot. Had cinnamon rolls on our last trip, It does use a good amount of fuel to get to higher temps.

It’s not on their site, and is actually from a previous model year. It fits perfectly, If you reach out to Prinsu they’ll tell which on to get.

Thank you, I’ve been trying to find ways the keep a stock look, while still having long range overlander capabilities.

Didn’t think about that, thanks for the heads up. To be honest the bare metal look has grown on me.

The light is a clear white, not much a color to them.

@@OneMansAdventure08 it’s very important to know what kevlin the light is, the higher it goes above 4400-5,500k you loose luminance, many people believe that the higher numbers are better…so not true, the optimum number of kevlins is debatable and conflicting… I once had 6000k bulbs that were absolutely garbage in the rain, although blinding to everyone, except I couldn’t tell if the lights were even on in the rain at night.

@@OneMansAdventure08I can’t find any technical information about these lights, for this price I’d buy ridgid that are known to be great with solid technology and numbers stating the led colour and luminance.. I couldn’t find any info on their web page either.

I noticed that too when I was scrubbing through footage. I knew I recognized the rig

I Actually have a video already recorded edited and ready to post. However, I found on post and I’m waiting for the PAO to get back with me.

That is coming soon. Had one filmed, but wasnt given the go ahead to post.

I haven't had any experience with the Baja's, but I have been trying to find a way to show off both the light output, and beam

I actually really like the lights, the quality is solid, and I have yet to have any issues with the function of the lights. The only problem I encountered was with the anodizing wearing off. I talked to the reps and basically they said the company they used to do it were having issues with life span. Told me to send them in for replacement, never did though

Thanks, working on a Rig update video that will be dropping soon.

​@@OneMansAdventure08 cool man. What size tire u got on them rims?

@@mikes1292 It had 32's, but after the lift it now has 35's. The video for the lift should be up by next week.

Thank you, stay tuned for the build its going to get a whole lot better!

@@OneMansAdventure08 👍