I've got two BMW's, and ordered my GS-911 a few days ago; should be delivered any day now!! This is a must have tool....

This is a great video. My K1600 shocks are there from MN. Really helps me understand the process.

I have a 2005 R1200RT and can’t figure out how to adjust the ESA, my manual show how to adjust it only how to manually adjust it by hand in other words its not a ESA system that it’s showing, do you have a video on how to set up the ESA on this bike?

Whoa. But if you’re riding in the desert… secret water supply.

Very nice. What I don't understand is WHY does a replacement shock, a Cartridge cost almost $700 ?

PERFECT!

I'm 157 lbs of weight Do you guys have or make an up grade kit for 2023 Honda NC750X ? If Yes how can I get it? thanks

props for representing Az across the world!

Hello, what about rear shocks? I noticed there are two types of spring, at least when looking at the color and the coil. Some are grey and some are white and seem thicker.

Ted I sure appreciate your quick reply VIA email to guild me to the correct GS911 for my 2022 BMW S1000RR. Now the only dealer visits will be by choice! As in not interested or willing to check valve clearances. Not those pesky ‘Check control message’ that says yearly service due! Miles until required? 6K! Date and time due despite needing nothing. I personally don’t flush brake system every 12 months. But also don’t use recommended oil change per BMW. 2-3K max between oil changes. If run hard might even be under 1k before draining that worn out lifeblood. Even with full synthetic oil

Hallo Ted, thank you for these video,s. I like and learn from them a lot. I have a 2006 bmw k1200 gt with esa 1 suspension. The strange thing is that since a few weeks there are no esa signals anymore on my dash. No helmets, no luggage and no soft ,comfort or sport. Whatever I try it is not coming back. I have deactived esa with motoscan and then reactivated it. That does not work also. Do you have any suggestions. I would-be very gratefull. Best regards from the netherlands.

Very usefull I believe my esa 1!are done what is the part number for the shock at 9:00 thats for the rear and whats recommended for cheapest front shock ? Thx

Glad I watched this. just bought a UK 2012 GS ADV with full wilbers. I had no idea they were part old and new conversion.

if you replace the esa shocks do you need to pair it to bike? great video🖐

Awesome video. Just recalibrated my RT ESA shocks! Thanks Ted 👍🏻

Awesome video share! Thank you Ted 😃👍

Can a Macbook or iPhone wireless be used in the same way??

Just put in a Tractive rear shop to go along with Andreani Misano Fork Cartridges for my 2017 F700GS Bike feels completely different now. Far less squat and dive during accelerating and braking. Can't wait to take it off road.

2022 , still available?

I'm looking for 1" lowered height shock for 1200GS but I don't want to use the ESA system. can you refer any?

If it was me I would've pulled / inserted the fuse and check connections to and on the fuel pump. A bit of healthy paranoia or just paranoia?

If you happen to be in Istanbul, stop by MOTOSENKRON and have all the shock absorbers of BMW motorcycles repaired with a one-year warranty, very cheap 250 euros.

If you happen to be in Istanbul, stop by MOTOSENKRON and have all the shock absorbers of BMW motorcycles repaired with a one-year warranty, very cheap 250 euros.

If you happen to be in Istanbul, stop by MOTOSENKRON and have all the shock absorbers of BMW motorcycles repaired with a one-year warranty, very cheap 250 euros.

If you happen to be in Istanbul, stop by MOTOSENKRON and have all the shock absorbers of BMW motorcycles repaired with a one-year warranty, very cheap 250 euros.

If you happen to be in Istanbul, stop by MOTOSENKRON and have all the shock absorbers of BMW motorcycles repaired with a one-year warranty, very cheap 250 euros.

i should have ordered from you guys , ordered Tractive Extreme shock and fork drop in units for husky 901 from Konflict 5 weeks ago , original ETA was 3-4 weeks and as of last week it sounded like they didnt even have the parts yet but email responses only and generic group seeming at that with no specifics nobody answering phone , did business with them before about 5 years ago and had a good experience this time im not sure what the hell is going on , took the payment of course then almost zero correspondence since , they just disappeared apparently

is the GS-911 made for the 2014 r1200 gsa?

hi ted . have you got any pics of pin removals from original connector socket. im getting the runaround atm. wanted to see if green or brown goesto the left side as bmw wiring diagram only shows colours on the loom

Great! Mine is “92! So...no circlip :) It’s only 45 000km and so far only transmission output seal failed.

Hello, Good video. My bike is 2017 R1200GS Rallye with Dynamic ESA. I will replace my stock absorbers with rebuilt ones by Wilbers soon, I have HEX GS-911 and going to calibrate suspension by myself. But BMW Mottorad manual says that before calibrating, you must raise the motorcycle in the center so that the wheels are suspended in the air and use the recommended charger, which guarantees a 13 Volt mains supply. What do you think on this, is it necessary? Thank you in advance.

Is your website still a thing?

I bought your gs911. I have gsa 2018 and I have some issue with ESA suspension. Do you think I need to do calibration. I'm from Canada and now I 'm in Mexico and after Guetemala. There no BMW dealer's close to me . Thanks

Hello Mr. Porter, great videos thanks for sharing! Do you got a specific video for a spring replacement rear shock F800 GSA 2015 ESA ??>

Muito bom! grato

I've k1600gtl exclusive l also have the gs 11 tool how can I change the tyre sensors to psi from bar can't find it anywhere

Not a heat shield, but I bet it does do a great job in shielding cool air from cooling the shock... so I suppose you said it right, or ever better, you knew exactly what you were saying!

Those lovely guys at BMW also changed the wiring harness colours and reversed the male and female plug ends between the ESA I and ESA II shocks. I mean, why wouldn't they if it makes fitting ESA II to an ESA I bike more difficult. So now I have to hunt down a wiring diagram so I can swap out the block connector! Well done BMW for making a simple job more complicated!

Certainly I am of the view ESA is an unnecessary evil what about a none ESA arrangement ?

Awesome

Was going to buy a 2007 R1200RT with only 4,700 miles on it for $5,400. After watching this video.. NOT. Typical BMW CRAP! Bullet proof engine with over engineered shit surrounding it. Thanks for the heads up to pass on a BMW.

Thanks for the explanation. I been looking to see how preload is adjusted on these things.

great video

Is it possible to use this to dial in a certain amount of pre-load based on the specific rider? I may was 1 rider to be closer to the stock 1 rider + bags setting or something along those lines.

Supply BMW GS911 moto scanner with good price Skype: shun2008

So the big question is do you need a laptop along with the GS911 to clear the codes? Or will an app on an iPhone be able to work at clearing codes? Don't recall want to ride with a laptop. Thanks.

Hi does the Hexcode gs 911 work the same on a BMW r1200rt 2013 to calibrate the ESA ?

great explanation.

Thank You for this video. Very useful for me.

What's my best option for a K1300GT?