It that your expert opinion about an advanced tool from a multi-billion dollar world-wide company?

@@JorgTheElder 40 years. What is your answer to a shitty expensive tool?

Doesn't seem very complicated to me.

@@TNH91 Well, try to replace the inserts after a few hours of work. And pay for it. :)

@@atvheads As opposed to paying for someone to sharpen a fully carbide drill at that size? The cost of easily replaceable carbide inserts is almost negligible compared to the time cost of having to change a full drill and getting it sharpened. Not to mention how the cost of a fully carbide drill of that size would cost a lot too. Now, if you live somewhere where the labour costs aren't that high then spending more time on it instead of paying more for the tool may make more sense.

It will last longer. With feed milling all the cutting forces go directly upward into the spindle which is a GOOD thing, unlike traditional side cutting/milling which puts a lot of radial force on the spindle (not good). Feed milling also gives EXTREMELY predictable and reliable tool life with very high metal removal rates.

​@@CNCMatrixcompared to the very smooth cutting from more traditional side-loaded tooling, high feed shakes and vibrates machines significantly. The impulse from this is the root of my concern. Chatter can kill a spindle. What many high feed tools exhibit seems to be low frequency, high amplitude chatter. I haven't seen independent studies done.

I am really confused by our comment, it looks like the video is shot with cameras setup outside of the machine and focused in on the tool body. the machine is a vertical milling center where the table moves in the X and Y axis and the Z axis (spindle) moves up and down, the spindle does not move in the X or Y

Ingersoll or Taegutec :)

+ @evgenarifov8846 That is correct. Thank you for your interest. -Ingersoll Cutting Tools

Thank you for your comment and excitement regarding this new insert size! Please reach out to your local ICTC sales engineer or distributor, they would be happy to arrange a test for the CERASFEED.

+@trilliondollarman2514 Thank you for your comment. At Ingersoll Cutting Tools, we have never monetized our videos, because we wanted to allow users to watch them without ads. Unfortunately, in May of 2021, KZbin changed its terms of service, and now "KZbin has the right to monetize all content on the platform and ads may appear on videos from channels not in the KZbin Partner Program." We apologize on behalf of KZbin, and we hope that viewers will understand. -Ingersoll Cutting Tools

@@IngersollCuttingTool I didn't know that. Thanks for the reply. What a bunch of greedy crooks they are.

+Lele Armi - The DiPosFeed line of high feed tools are capable of Z-level roughing, profiling, contouring, channeling, helical/corkscrew milling, ramping, and plunge milling. At the following link there is a brochure with detailed information, including operating guidelines in various steels and stainless steel, and there are also several videos showing the tools in action: www.ingersoll-imc.com/product-lines/sfeedup-dipos-feed For additional information, please call our Customer Support Team at 800-380-0852, or email [email protected]. Thank you for your interest. -Ingersoll Cutting Tools

+Slovnoslon The specs are in the video description. Thanks for your interest. -Ingersoll Cutting Tools

+Vova Putin - This design is not the same as other tools in the industry. The insert seating area on the Ingersoll tools is larger to prevent deformation. For additional information, please call our Customer Support Team at 800-380-0852, or email [email protected]. Thank you for your interest. -Ingersoll Cutting Tools

Curious what sounds horrible, I am new to this type of milling

To me that sounds like a face mill going through alloy steel. i don't see whats wrong with it

+leatherneck Precision Machine - Seat Track Cutters are form tools with different angles, radii and tolerances. Ingersoll quotes them based on the form provided by the end user. For additional information, please call our Customer Support Team at 800-380-0852, or email [email protected]. Thank you for your interest. -Ingersoll Cutting Tools

+Kuei 12 The product manager for these end mills confirms that you are correct. It should be extension from gauge line, and the video description has been corrected. Thank you for the good catch and for keeping us honest. -Ingersoll Cutting Tools

+Kuei 12 On page 28 of the brochure at this link: ssl.ingersoll-imc.com/resources/pdf/new-343-1_gold-sfeed.pdf, there are recommended cutting parameters and insert grade recommendations for Titanium. For additonal information, please call our Customer Support Team at 800-380-0852, or email [email protected]. Thank you again for your interest. -Ingersoll Cutting Tools

@@IngersollCuttingTool Thanks again!

+Kuei 12 Good idea. Specs have now been added. Thank you for your interest. -Ingersoll Cutting Tools

@@IngersollCuttingTool Thank you! Now, I am impressed.

+shawnhuk Hello and thanks for your interest. We apologize for any delay you have experienced in receiving support for an Ingersoll tool. We invite you to either email our technical support team at [email protected], or for immediate help, call them at 800-380-0852, Monday through Friday, 8:00am to 5:00pm Central Time. If necessary, the tech support team will also be able to connect you to the national product manager for the MultiSurfer line. We look forward to hearing from you. -Ingersoll Cutting Tools

+Mangesh Borkar Thank you for your question. Please see our website: www.ingersoll-imc.com/product-family/516776. In the Product Bulletins tab there is a PDF file with information about the inserts and holder used in the video: ssl.ingersoll-imc.com/resources/pdf/NEW-141-1_T-Force-50mm.pdf. Feed and depth-of-cut recommendations are also in that document. -Ingersoll Cutting Tools

+Kuei 12 Thanks for your question. The .03” step is deliberate. The program was written for a very shallow ramp along the outside wall. See this image: ssl.ingersoll-imc.com/resources/images/multisurfer-shallow-ramp-and-step-1000w.jpg -Ingersoll Cutting Tools