ASSolarinc

Пікірлер

@brendonshave7776 Жыл бұрын

Anyone know where to get the joiners?

@kberryboy 2 жыл бұрын

What up randy from trailer park boys. Lost some weight good for you

@bestgreenhomestead 2 жыл бұрын

Find us on Instagram, Facebook, and KZbin to find pictures and videos on how to do it properly. We are currently installing one right now and posting on it, located near Ottawa, ON, Canada. I am a Construction Engineering & Civil Engineering Technologist. My good friend is a long time roofer with his own company now as well as mason. He helped me instal while shingling the roof, and shingles are cut around. The way they should be. Please don’t do it this way. And please reshuffle your roof when installing a solar system. It’s a lot of work and expensive to remove a system, shingle and re-install.

@bestgreenhomestead 2 жыл бұрын

Great product, but if you want to see how to do it properly follow our Chanel. This method will probably not leak, but we are currently installing this system while doing our roof, it will be sure not to leak by shingling around the flashing and cutting shingles to go around flashing.

@Drewsroofingandhomerepair 2 жыл бұрын

Can you make a video showing the whole process without turning off the camera

@pierluigicolotto9570 3 жыл бұрын

I love use Avasva Solutions for that issue.

@YuriyKhovansky 3 жыл бұрын

Discover how to do it with Avasva.

@marioalbertoguerra5743 5 жыл бұрын

i appreciated this video, i need the name for each part used for installation please...

@dylanstuckless5669 5 жыл бұрын

Where can i buy this system?????

@terrydennis6669 6 жыл бұрын

Very informative! I feel empowered! Thanks!

@bradynparisian7100 6 жыл бұрын

Your pilot holes for the lag bolts are TOO LARGE. As per engineered specs for Kinetic Solar K-Rack, you should be making a 7/32" pilot hole. The pull strength of your lag bolts has now been compromised and vastly reduced as a result of the larger pilot hole.

@johnhelton457 6 жыл бұрын

I think you can see how to make it on Avasva . This is just an advice ;)

@carmelinarosinski8953 6 жыл бұрын

With Avasva plans doing something like that was easy.

@shantelguetgen4157 6 жыл бұрын

I took great plans from Avasva . It help me a lot with my own solars.

@shantahsieh335 6 жыл бұрын

Great to see that Avasva has new instructions to save my money and energy to build it.

@shantellamend8986 6 жыл бұрын

Great to see that Avasva has new instructions to save my money and energy to build it.

@carmelinakatzman1863 6 жыл бұрын

If you like to make your own energy you should go to Avasva

@luongmaihunggia 6 жыл бұрын

0:49 There is no such thing as a "kinetic Kay rack system" believe me, I tried searching for "kinetic Kay rack system" on google and none of the result look like what you have in the video.

@shantahsieh4833 6 жыл бұрын

Im using Avasva instructions to make it and I do it already :)

@shantahsieh432 6 жыл бұрын

If you like to make your own energy you should go to Avasva

@shantellamend8986 6 жыл бұрын

The best thing I've found on the net was plans from Avasva .

@shannaheckler1933 6 жыл бұрын

The project like this step by step is described on the Avasva website and many more plans you can find on that website.

@Starfox-zg4tk 6 жыл бұрын

Measure twice drill once “. However, failed to drill straight cause the flashing is crooked. 😂

@coreymcniel3390 6 жыл бұрын

You can find perfect idea for that on Avasva Solutions website.

@pernellkatchp66 6 жыл бұрын

if you want to know how to make it yourself , just go to Avasva webpage. There you'll find your answers :)

@pegdimarco5316 6 жыл бұрын

Great place to learn how to make it yourself much much cheaper. Just google for 'Avasva' website:)

@egorbiletskiy2950 6 жыл бұрын

I did it with the help of Avasva solutions.

@starrstewart7083 6 жыл бұрын

With plans from Avasva you can make it really easy.

@jaydenbrumous2582 6 жыл бұрын

With plans from Avasva you can make it really easy.

@bowermanwinburn6723 6 жыл бұрын

I found a detailed and accurate project on the Avasva website.

@creektilghman9187 6 жыл бұрын

work goes much faster with Avasva plans.

@rileyhoskins1399 7 жыл бұрын

Shame though their site went under...

@shannonamend 7 жыл бұрын

Nice movie. However you can make it yourself. Just google INPLIX and learn how to do it easily.

@michaeldoherty2289 7 жыл бұрын

Straighten the plate for Gods sake. Don't you care how it looks? Its got to be in line with the shingle line. Anything otherwise is just sloppy, poor workmanship.

@eramirezda 7 жыл бұрын

i heard that it is a fine if you install solor yourself. is that true?

@luongmaihunggia 6 жыл бұрын

"Solor" is not a real word

@vivianguo5786 7 жыл бұрын

good !

@borysfomichev9100 7 жыл бұрын

You should go to Inplix if you'd like to make it by yourselfs guys.

@SkashTheKitsune 7 жыл бұрын

ok, so weebs are like crush washers?

@SkashTheKitsune 7 жыл бұрын

remember kids, lock washer, flat washer, or flat washer, lock washer if you are putting nuts on.

@weebandit 8 жыл бұрын

As has been pointed out in other comments, that flashing is either not long enough or it's being installed incorrectly. A roof is a mechanical water shedding system not a sealed solution -- each successive course overlapping the other. As such, unless that bracket flashing goes all the way up underneath past the three-tab slit you're effectively shortening the roof by years and possibly damaging the truss system via moisture over the long term. A perfectly put together roof should not require one dollop of "sealant". It is the unbroken overlapping of the shedding surface pieces which maintains the integrity of the roof. As a matter of fact, depending on sealant is a guarantee to future problems. Sealants weather and fail. Roofer's tar is mainly to glue the three tab system back down after maintenance so high wind doesn't flip back the tabs. I realize this is a video series to expose people to the ease with which a rail system can be installed. However, performing this work without a thorough understanding of how a roof should function or be repaired is asking for the slow, steady, and extremely expensive structural rot repair of the compromised roof at some point in the future.

@ZPaulCenti 6 жыл бұрын

Hello. I am a home owner in FL about to install a 30 panel array on my roof so I have been doing relentless research and checking out many videos. This whole flashing thing is where I am stumped. After seeing this comment it almost sounds like you are saying all solar roof installs with this standard practice will kill a roof in a much shorter time. In this video they are using a standardized flashing system that is 12x12 in which you tuck about half of it underneath the above shingle. He is using a "Snaprack" system found on ebay at about $15 each, which is a lot of money! Now, I'm saying to myself this is not a good idea to have to break apart shingles at all. I don't really get why it's standard to do it in this manner. As it has taken me now 4 months to finally get the permit to do this I had purchased 5x7 steel flashings on Amazon at about $50 for 100pack. My purchased system included the L-foot with rails and attachments but no flashing parts. So as a way to cut costs and perhaps perform a safer method I noticed my flashings fit nicely horizontally between my shingles and that I could firmly tuck the top of the flashing into the above shingle without tearing it apart and putting it directly underneath it. My proposed plan is to use a generous amount of sealant on the flashing, fill the hole with sealant, then tighten down the bolt through. Also the flashing would not overlap shingle below as it does in this video. Sound crazy? See my photo at this link s26.postimg.cc/4hc1x7hi1/20180410_173143.jpg

@rhaebus9785 6 жыл бұрын

He is right they did a pretty sloppy job, the flashing should be up higher to promote water shed. I don't like that particular mounting system at all and am currently working on a DIY install / research phase right now. I decided to go with an IronRidge rackmount system as they have great reviews and look to be a solidly built product. Look up their Flash Foot two install videos on here and you'll see what I mean. Hoping I do not have the same permit trouble in Florida as you did, 4 months seems like a long time! Hoping to start building in the spring time when it's a bit cooler out.