7 ай бұрын
Пікірлер
@roxydejaneiro5640 2 күн бұрын
good rust going for a 2 year old vehicle
@eastcoastroadrunner 5 күн бұрын
This is simple and lots of videos but I can't find a video for my 2018 Honda Pilot elite with the 9-speed transmission which is drastically different to install the transport
@Rosythorns2000 7 күн бұрын
Great video! Do you have the torque specs for the top and bottom bolts?
@joewest2560 10 күн бұрын
Great video! Wow that cooler doesn't seem very significant in terms of cooling capacity, have you seen two of there ever installed in series!
@TheBruhaba 10 күн бұрын
Thanks for the very nice and clear video. I have an 08 escalade esv, I don't see continuity between the two ground pins L and M. Pin L appears to be a dead pin or go elsewhere on the board I can't identify. I do see continuity between E and F so doubling the power inputs definitely works. But I suspect doubling the ground through L and M does nothing which is why Ford did not do it either? Did you have continuity between L and M?
@Dixonyass-g8v 12 күн бұрын
I’m getting oil fouling on my cylinder 1 spark plug which caused a misfire rough idle check engine light and stabilatrak light on replace spark plug and and lights went away but I’m sure they’ll come back and I’m going through oil like crazy but no smoke
@emajinkiti 16 күн бұрын
Thank you for being so thorough!
@mrnonpc9885 18 күн бұрын
Looked at the connector link. Do GM and Ford use the same connector? Thanks for your help.
@justinwilloughby8837 24 күн бұрын
Great video! Thanks for the help. The heated and cooling had stopped working in both seats. I followed the video and now the drivers works but still nothing on the passenger side. I’m not sure where I went wrong. Do you have any feedback on that situation?
@ZackValdez Ай бұрын
DEMOVIDEOPLZZ
@joegrammatico171 Ай бұрын
I'm in the process of installing Pop outs, just bought a pair but needed the hardware I did some research on install parts. What I found out was Wolfsburg West and West Coast metrics were the places to buy this stuff from. Wolfsburg West Strives to purchase the best parts and even makes there own. I watched just about every KZbin video on installing Pop Outs. One Video brought to my attention that the seal goes in anyway but mentioned to look at the way it sets in the channel because it has a curve when installed. He showed that installed one way the seal curves to the outside but when flipped over and installed it curves toward the body which gives a tighter seal. Just installed the seals on mine, he was correct? I installed one what I would call backwards, it curved toward outward which I corrected, you want them to curve inward so the seal sucks up to the body of the vehicle. Mine are ready to install with the seal curving toward the body. If you bought cheap seals that could be the problem, by looking at the video they look like they could be installed incorrectly? I could be totally wrong about all of this but what I learned form the video made perfect sense. Is there a right or wrong wan to install them, I would like to know!
@AntoineFinch Ай бұрын
$1,478 just for rear and front shocks on amazon?
@streetriderscustoms Ай бұрын
There is a big difference between OEM quality and aftermarket
@RubinGasoline Ай бұрын
Thank you for your help
@streetriderscustoms Ай бұрын
Glad I could help!
@ruthabera7717 Ай бұрын
How about shelf life? Do you have an estimate when you will be able to get back your money.
@ruthabera7717 Ай бұрын
I was planning to start doing if but this kept me on pause any tips..?
@streetriderscustoms Ай бұрын
Some things sell fast, some things sell slow. There is no rhyme or reason. You need to have the space for things to sit around. I've had stuff for 2 years and I have sold stuff the same week.
@chaccaron4321 Ай бұрын
Good work bro
@streetriderscustoms Ай бұрын
Thank you
@vettrious Ай бұрын
change the compressor dryer every 6 to 8 years prolongs compressor life
@spelunkerd Ай бұрын
Localized heat damage at a connector is always secondary to a bad connection, producing localized power in direct proportion to the product of that local resistance and the square of current. So always start by cleaning oxidation from the connector on both sides, to reduce that resistance to as close to zero as you can. You're absolutely right to replace the connector, but if you can't get one then check later to feel for ongoing heat. Junk yards might have what you need without breaking the bank. Good video!
@FallenbirdTheSkywing-Studios Ай бұрын
Hey Street Riders, do you still have this installed in the Tahoe? If so, still functioning properly? Give a current review if you don't mind.
@streetriderscustoms Ай бұрын
Yes it still functions great but they are not available on Amazon anymore
@tpit617 Ай бұрын
Would love to see your videos show the finished job and drive it around... But I appreciate the content. Thanks!
@streetriderscustoms Ай бұрын
I will try to make one of those! thanks for the idea
@tpit617 Ай бұрын
@ Thanks for making the videos! Replaced my front shocks on my 2013 EXT thanks to you! 🤜🏻💥🤛🏻
@gregbrooks6318 Ай бұрын
Man I just paid $90 to ship a damn headlights that I sold for $130 with free shipping. I expected $40-$50
@streetriderscustoms Ай бұрын
$90 sounds way too high. It must have been a huge box or shipped somewhere crazy
@gregbrooks6318 Ай бұрын
@ thanks for the reply man I just started selling, I work in a body shop. Yeah way too high, I shipped usps and used the original box Honda shipped it in, it was definitely a big box. I did a Google and see that we have an ups location located within a local store, I’ll have to get quotes next time.
@streetriderscustoms Ай бұрын
@gregbrooks6318 USPS is never the way to go! They are the most expensive ever. I have found FedEx to be the least expensive
@tbear68- Ай бұрын
Great video, thank you. Im kinda late to this party, but it is best to just convert all for corners with new and chuck all the OEM shite. Ive found Arnott Industries. 👍 and readylift parts kit 69-3015. Its gonna be my overlander on 33's. Lets go...
@bobavon6048 Ай бұрын
Good video. Very informative on the removal and installation. Hope it still rides good.
@streetriderscustoms Ай бұрын
Rides awesome and back to OEM quality now
@05AcuraRSXtypeS 2 ай бұрын
Thank you, found a fix from LSXmatt, saw the number one comment, then found your video... Seats work now, who knows how long they had not been working... Thank you!
@streetriderscustoms 2 ай бұрын
I'm glad that I could help!
@thomasmeagher4801 2 ай бұрын
Looks really nice, but those stairs sure do seem to have gotten pretty narrow with finishing of the outside wall
@streetriderscustoms 2 ай бұрын
They might be a tiny bit small but really are not bad in person
@Hassan_tv 2 ай бұрын
Did it fixed your problem my Chevy Tahoe 2013 60k miles only and it started to lose oils I even do regular service no delay also there is no leak at all
@streetriderscustoms 2 ай бұрын
Yes, no more smoke at startup or drinking oil. I should have done it a lot sooner
@Hassan_tv 2 ай бұрын
@@streetriderscustoms Thank you for your reply! What do you recommend: should I change both sides or just the driver's side? Also, you didn’t show if you made extra holes in your valve cover.
@jeremyfinton9864 2 ай бұрын
14 dollars each brand new on Amazon right to my door
@FaisalHamid-h7x 2 ай бұрын
Many of BEETLEs have beams installed in them…. Would it make any difference Beam or No Beam?
@streetriderscustoms 2 ай бұрын
This is a super beetle, so it has the struts in the front and no beam
@FaisalHamid-h7x 2 ай бұрын
Does this Model have a ‘BEAM’ ?
@streetriderscustoms 2 ай бұрын
No, super beetle so it has struts
@spankymagee 2 ай бұрын
How does it work when you have freight on your listing? When they buy, do you have to then figure out who to use and get a quote? Does ebay give you a list of vendors to pick? How do you charge them for the freight after they already purchased the item. Ive been looking for information in a lot of plac3s but nobody really talks about the entire process, not even ebays FaQs answer any of that. And i heard you say you were going to make a video about it, but couldnt locate them
@streetriderscustoms 2 ай бұрын
What I do is find the company first, put in my package dimensions, and that way I can get a good idea about the shipping costs. I then put freight shipping on the listing with the price. I always list to contact me about the shipping price before hand to get an exact quote.
@spankymagee 2 ай бұрын
@@streetriderscustoms thanks for that info. So how do you charge them even when you do know the price? Update the total of the listing price for them before they purchase, or ebay has has a spot for you to put the freight costs before they pay? It seems way more confusing than necessary.
@mrs.whatley5596 2 ай бұрын
Bea
@richdelgzz 2 ай бұрын
My drivers seat bottom is the only part not working? Could it be the same connector? Or would all seats not heat if that connector goes?
@streetriderscustoms 2 ай бұрын
I would assume they all wouldn't work. That issue may be the connector or wires that go to the individual seat
@kingdj2178 2 ай бұрын
What did you use to break the melted plastic
@streetriderscustoms 2 ай бұрын
Basically just pried it apart with a small screwdriver. If its the first time breaking the plastic it can be a little tough if it is melted a lot
@tkong35 2 ай бұрын
How do u trick the computer to get rid of the check suspension message does anyone know ?
@streetriderscustoms 2 ай бұрын
Doing what I did is keeping it factory so there are no issues with the suspension light. If you were getting rid of the OEM shocks there are wiring kits with resistors that you can buy to trick the light
@androidphone6972 2 ай бұрын
Wow so cool You’re a great guy with tools I can’t change a lightbulb, let alone ship an entire engine. Cool
@streetriderscustoms 2 ай бұрын
I appreciate it!
@kathryndreghorn8151 2 ай бұрын
How are the pop out windows now? Fitting some and are having the same issues
@streetriderscustoms 2 ай бұрын
After doing all of the things that I talk about in the video they are fitting good. I worked on them quite a lot to make them fit
@kathryndreghorn8151 2 ай бұрын
@@streetriderscustoms thanks. I’ve bought a second set of hinges to re-drill to see if that works.
@Jonb72 2 ай бұрын
"this is the issue" " " " " "
@bobavon6048 2 ай бұрын
You also have new nuts and bolts to go with it. Too bad we couldn't see you trying a spring compressor to take out the original springs as that would have been informative.
@streetriderscustoms 2 ай бұрын
That process is something that most people shouldn't attempt unless you have the proper equipment so I don't want anyone to try and do something sketchy and then blame me
@The_FantasyForge 2 ай бұрын
As of 10-5-24 You can no longer access the website without a pre existing account and you can not make one.
@streetriderscustoms 2 ай бұрын
YRC is out of business unfortunately
@breannahoveiler9658 2 ай бұрын
How do you get It to play after that? Mine is hooked up but can’t figure out how to connect my car to my phone.
@streetriderscustoms 2 ай бұрын
You need to have your phone in pair and then you switch between XM and the bluetooth with the 'back' button
@anthonyosorio2613 2 ай бұрын
Who are you using now that yrc closed down
@streetriderscustoms 2 ай бұрын
Right now I have no freight items to ship and I have not found a new company
@Mikedean-i3d 2 ай бұрын
i understand this alot man i sell car parts myself , on ebay and i find your videos very good , i own a repair shop with my dad and i sell car parts from my garage its getting hard myself doing this with its crazy at times but it helps!
@streetriderscustoms 2 ай бұрын
It does get overwhelming, I have taken a break recently
@wmsterritt8391 2 ай бұрын
Potential "thermal event." What is the root cause?!!!
@streetriderscustoms 2 ай бұрын
Check out my other video on this to see
@hotrod0013 2 ай бұрын
Two screws are longer to account for the cover.
@tomcl.9732 3 ай бұрын
Pilot atf cooler
@edriley3240 3 ай бұрын
Do you have a best selling word document
@streetriderscustoms 2 ай бұрын
I do not, but I have some videos talking about the parts I like to sell the most
@chrstiano2497 3 ай бұрын
Iam attempting this hopeful it fixes my issues on my 08 escalade esv
@streetriderscustoms 3 ай бұрын
Should be good. Mine is still working great after doing this
@chrstiano2497 3 ай бұрын
@streetriderscustoms sweet man iam looking forward to it and having cooled and heated cheeks lol
@chrstiano2497 3 ай бұрын
So I have 2 red with white wires do they go together for power?
@Mash333 3 ай бұрын
My god,.that rust... :+(
@streetriderscustoms 2 ай бұрын
Its not really bad at all and any car that has spent time in New England looks like this
@Flaco43 3 ай бұрын
I have a few headlights I’m trying to list but don’t remember the model or year they belong to how do you go about that situation I’m really struggling on that
@Flaco43 3 ай бұрын
I tried searching part number on some but couldn’t find anything
@streetriderscustoms 3 ай бұрын
Usually searching a part number is the easiest way and at least gets you close. If you can find out the make, then you can search that and look through the models. Headlights have such a unique shape and styling most of the time its easy to remember what car they came from
@marketbuy 3 ай бұрын
Hi. Help. My rear driver side glass window slid to the bottom of the door frame. From inside the door frame, i can manually pull the glass upward to close the glass window. What is causing this to happen?
@streetriderscustoms 3 ай бұрын
The window fell out of the regulator and the tracks. With these Volvos its usually the clip that holds the window to the regulator that is broken. If you bring the window all the way up and then slide it down into the regulator you should be able to put a new clip in
@marketbuy 3 ай бұрын
@@streetriderscustoms Ok. Thank you. I took the car to the body shop. I told him to fix it the cheapest way. He manually lifted the window all the way up. He then drilled a hole into the door frame AND the window bracket holding the glass. He screwed a bolt into it. Although I will never be able to roll down the rear window, my fix cost me just $20. 😂
@kenburkham5483 3 ай бұрын
All these contributions refer to mastubating.