I have one and it a flat shooting pistol. I put an Acro P2 on mine.
@cheesebvrgers19 күн бұрын
Cool gun but what’s also cool are those little carts. Great tool.
@tylertruitt37720 күн бұрын
im looking to get a sp5k or mpx k. im a disabled shooter who shoots one handed. is the mpx k with regular rail any heaver the sp5k?
@Misc.munitions19 күн бұрын
@@tylertruitt377 both are not too heavy but the Mpx is bigger with more metal. The sp5k is lighter slimmer and more manageable but the manual of arms would possibly be easier to use for you in the Mpx due to the ar designs and ambi controls.
@tylertruitt37719 күн бұрын
@Misc.munitions well if I get a sp5k I'll get a lee sporting lower that takes AR triggers, safeties and grips
@thesig30121 күн бұрын
New ones have the Timney trigger
@totenfurwotan447821 күн бұрын
Idn what they do to get those MD devices on but my 16” muzzle device was on there so solidly that it was MARRING WRECHES and not budging and inch
@Misc.munitions21 күн бұрын
@@totenfurwotan4478 I boiled mine in water. Had an action wrench in the vice. Nothing would work 😂 angle grinder go brrrrrrr
@totenfurwotan447821 күн бұрын
@@Misc.munitions i boiled mine, blow torched it, soaked for 3 full days. Sent it to a gunsmith and finally they did it
@LAWLESSXX8823 күн бұрын
I love the cmc triggers
@BrothaGoodReps24 күн бұрын
Barrel length on that suppressed boi with the eotech?
@andrewjuriansz2056Ай бұрын
I must say your a humble guy, usually when people show off their SR15's there's an air of entailment to them. But not you. 👍
@tbdantasАй бұрын
What was the chest gear and links for it
@Misc.munitionsАй бұрын
@@tbdantas unobtanium gear chest rig sleds k. With a Haley flatpack. Roll 1 pouch on the bottom
@armedandbrokenАй бұрын
Nice setup. Mine has been solid. Really digging that handguard. Subbed.
@JadeXNightАй бұрын
What rail length did you go with im doing a mpx similar to that.
@Misc.munitionsАй бұрын
@@JadeXNight pretty sure it’s the 8 inch handguard from Midwest industries. Pretty solid!
Thanks for letting me pew pew that sig down at the farm man. Sick vid keep on coming
@jabsubabahavh4243Ай бұрын
Pretty sure that dude closed his eyes when shooting lol
@jsprague19882 ай бұрын
such a clean setup. nice work bud.
@jsprague19882 ай бұрын
What flatpack do you have hooked up to that DRIP-9 from Unobtanium Gear? I have the DRIP-9 and would love to figure out how to attach that flatpack like you did.
@jsprague19882 ай бұрын
Looks like Hailey Strategic?
@Misc.munitions2 ай бұрын
@@jsprague1988 yup Haley flat pack with the unobtanium gear. Both work fantastic. It was weird finding stuff that had the right buckles etc on stuff plus a roll 1 under the front. I’ll be doing a review on it sometime.
@DaddyWarbucks7132 ай бұрын
Nice patch wall I was 1/2 Bull Troop🤙🏼
@Misc.munitions2 ай бұрын
@@DaddyWarbucks713 🤘 hell yeah!
@RedEarthRider2 ай бұрын
Love my Gen 1 mpx. I recently broke the firing pin spring not sure on round count.
@Bretts_Builds2 ай бұрын
🔥🔥🔥
@Misc.munitions2 ай бұрын
@@Bretts_Builds 🫡🫡 thanks dude!
@coleworld182 ай бұрын
Is that the Dual-Lock Flashcomp from griffin? I’m interested in getting a griffin Mk 2 with that muzzle device and want to know how the flash suppression is compared to a standard flash hider. Sick build 👍
@Misc.munitions2 ай бұрын
@@coleworld18 this one is the gate lok option. With that muzzle device flash suppression isn’t bad at all but it does have a brake style design so at night it flashes a bit especially 1-2nd shot
@Sidewiner942 ай бұрын
Nice rifle man some of my family are looking at the Credo for their optics. I'm an acog guy personally but that seems to be one of the better LVPO optics out there.
@Misc.munitions2 ай бұрын
@@Sidewiner94 honestly for the price it’s great. I broke a pst gen 2 so I wanted something I felt was better. And honestly it’s been fantastic. Clear glass decent reticle. For the price it’s my go to
@mikereimus88792 ай бұрын
Looks like a great gun nice video
@greybeard2772 ай бұрын
Good job. I would tone down the background track a notch or two, but good job.
@markrobison25492 ай бұрын
Solid video sir, you have earned a subscriber. Rifle setup is nice, I plan to do a similar build except I’ve got an LMT ambi lower stashed away.
@RandomWrongDeletion2 ай бұрын
Niiice build brother, love the video
@Misc.munitions2 ай бұрын
@@RandomWrongDeletion 🤘🤘 appreciate it!
@jaydubs63542 ай бұрын
Love my 14.5” mod 2. Really soft and smooth shooting gun. I had an rc2 on it for years. Just swapped to a cat wb flow through. It’s pretty tits. Tried the new kac cans as well and have the 762 can. I wanted to get away from propriety mounts on my ar’s. I prefer rearden at the moment
@Misc.munitions2 ай бұрын
@@jaydubs6354 everyone seems to rave about rearden mounts and such. I’ve been itching to try to them out see what they offer. Thats going to be my choice when I move forward with an ar10 option on my next purchase.
@jaydubs63542 ай бұрын
@@Misc.munitions it’s honestly such a simple solution I looked at it and said “huh. I really spend hundreds of dollars on surefire, dead air, and kac muzzle devices/mounts, when these are pretty cheap by comparison and so much easier” I’ll hand it to Q they made a bangin suppressor mount that is simple and very effective. But their own ego or whatever prevented them from listening to the community and adding wrench flats on the muzzle device. Really any negative I’ve heard about the rearden/q mount is that the Q mounts if not properly installed have been known to come off with the silencer and without wrench flats it’s a bitch to get them out haha. Rearden corrects that issue and they collaborate with other companies like fcd make muzzles that could suit your needs better and still retain the excellent mounting system. My big likes for the rearden system is price and weight. A rearden atlas hub mount for the suppressor and rearden muzzle device may set you back $200. Compare that to dead air where a keymo adapter and muzzle device will be $300+. Of course they now have xeno mounts which is much closer to rearden pricing albeit still a bit higher. Or surefire. You’re gonna be out $150 on a 3 prong and $350 for the b&t surefire adapter if you’re trying to use a non SF can with a SF muzzle device
@TheFix5562 ай бұрын
Great vid dude!!
@Misc.munitions2 ай бұрын
Thanks homie 🤘🤘
@ChrisMaher-g5l2 ай бұрын
Where does it stop. There are so many ARs I want just watch another video and yep I want that one too.
@Jerm2182 ай бұрын
Awsome build im currently waiting for my knights 3 prong to be pinned and welded and waiting for my knights can to come in so i can start my form 4
@Misc.munitions2 ай бұрын
@@Jerm218 sounds like you got a nice setup! Hopefully these wait times stay pretty short
@Jerm2182 ай бұрын
@Misc.munitions if you're looking for kac items without paying scalper prices, there are groups with a tight community
@Jerm2182 ай бұрын
@Misc.munitions I have a 14.5 sr15, sand cutter, 3.2 bolt, raid xe, ta02 with rmr, surefire scout light pro and soon to be kacs prt
@Misc.munitions2 ай бұрын
@@Jerm218 😳😳 damn that sounds sweet. Heard the same cutters are pretty smooth too. Eventually I’ll upgrade 😂
@Jerm2182 ай бұрын
@@Misc.munitions sand cutters give your upper premature wear
@ryansidders81762 ай бұрын
That's a flash comp, not hammer comp. Still diggin the simple set up though
@sheepdog9162 ай бұрын
Locals (businesses) are more often than not, d¡kheads. No more customer oriented than chains, and atleast chains care about affordability. All the local gn shops and hardware stores markup 50%+. Want a $100 benchmade? …$150. Want an $8 box of 193?…$15. $13 batteries?…$20. Ontop of that, they know nothing about the products under their roof. The excuse brown-nosers give is “they have a business to run and mouths to feed” ya, that’s great, but I’m a customer, not your benevolent benefactor…the homeless are in the same boat, but atleast they’re greatful of your donation, and not entitled (unlike many small business owners). If you can’t find a way to add value to your economy without robbing me, expect me to do business with Big Retail - atleast they’ve got a working formula. My dollars reward value, and corporations unfortunately seem to provide it more often than unsavvy, intellectually lazy, small businesses.
@Maine3072 ай бұрын
i am doing an inspired like build. Grfn Mk2 lower, love this! all concepts each makes sense. definatly agree with your concept. do u have a long barrel big brother for it? i have a LaRue 20 inch 556 big brother.. i am going with a long barrel short barrel set.. my local FFL i buy local as much as i can too. down to earth, you are totally down to earth! i can relate
@Misc.munitions2 ай бұрын
@@Maine307 I have a 14.5 and the 10.5 setup for night vision as well. Still working on a longer range option yet. Been through some bolt guns ar10s. 6.5 - .308. Always ended up selling them and going back to this gun. Though Larue is a hell of a nice gun 🤘 bet she’s sweet
@bmeng81952 ай бұрын
How's the griffin comp like when shooting unsuppressed? Is there a lot of flash? Have you ever done any nighttime shooting unsuppressed? Sweet setup btw!
@Misc.munitions2 ай бұрын
@@bmeng8195 last night shoot I did I ran one run unsupressed and I got some flash. It does have a small brake feature in it that doesn’t quell all the flash like a flash hider would. But it’s no flamethrower. Flash is minimal if at all. Most shots no flash. Thanks for the comments!! Appreciate it!
@TheRealAGTactical2 ай бұрын
We got USURPED…
@RedEarthRider2 ай бұрын
Nice rifle sir. You might want to ditch the electrical tape. when it gets hot it will melt, slide around, and get very sticky (that's what she said). Just speaking from experience my bro! Love your set up though!
@Misc.munitions2 ай бұрын
You got that right. I actually just ordered some amazon black bands to replace that lol
@HeywoodthepeckerwoodАй бұрын
@@Misc.munitionsget a few different size bike tire inner tubes cut them into different widths.
@30Cal-Cam2 ай бұрын
What shirt are you wearing? really nice
@Misc.munitions2 ай бұрын
Toyotas of war t shirt and a Costco flannel lol 😂
@SPR_ACTUAL2 ай бұрын
That range looks familiar 👀 I had that same credo 1-6 for a little while... great LPVO
@Misc.munitions2 ай бұрын
Maybe I’ll see you out there sometime 👍. Credo is solid for the price!
@armorers_wrench2 ай бұрын
How many rounds you got on the Griffin can? I've been considering one of their suppressors for my next one. I was considering the one you have or maybe the HRT 5.56 or even the normal Duel Lok 5 or Duel Lok 7 cuz I don't have a .30cal can yet so figured my next one may as well be a .30cal can. Edit: Also why'd you have to cut off the KAC 3 prong? Did you try a cheater bar? You can remove stuff with a torque wrench. There is a myth that it will damage it but that's nonsense. They have a reverse setting on the wrench because you may have to torque something with left hand threads. It's OK to remove stuff every now and then. The FCD muzzle device wrench is a good tool to own also.
@Misc.munitions2 ай бұрын
Griffin can is great. I have probably 1.5k thru it. I’ve gotten it really hot only blemish on the finish is because I left it sit against a rifle stand at a class that was painted 😂 so it’s got some burnt latex paint on it but it’s solid. 1st baffle is in perfect condition after some abuse. Not tooo heavy but it’s a solid can. I wanted a dedicated 5.56 can and it was a deal at a lgs so that’s what I ended up with I borrowed a KAC action bar or whatever and once I soaked the muzzle device in boiling water for an hour and putting my body weight behind it trying to get it off and it wouldn’t move, it was the only option.
@armorers_wrench2 ай бұрын
@@Misc.munitions I have an OCL Polonium K myself and I like it. Does the m4sd II that you have utilize Griffin's "eco flow" baffle design? I'm curious how effective that is as far as back pressure goes. My Polonium K is a gassy little bitch no doubt about it. Its a good suppressor as far as sound and flash reduction go but its high back pressure. Like the M4SD from griffin the OCL Polonium K is all 17-4 stainless which I'm sure is plenty durable for semi auto fire but I'd sure love to have a little inconel in the blast baffle for peace of mind, ya know?
@Misc.munitions2 ай бұрын
@@armorers_wrench oh yeah if it has any eco flow tech in it I couldn’t tell. It gets pretty gassy lol. But the gun doesn’t seem over gassed with the can. Ejection both suppressed and un suppressed seems just fine and it’s not slamming the bolt so I’m happy with it. Good 3 o’ clock pattern. Materials seem good in my opinion. I’ve ran it pretty hard and it’s holding up, unlike some silencerco products I have
@armorers_wrench2 ай бұрын
@@Misc.munitions What year did you get that SR15 upper in? I hear KAC is drilling the gas port a bit larger in their newer uppers to accommodate their new flow through suppressors. The older ones always had a reputation for being very well gassed with a traditional high flow suppressor. In fact, they had a reputation for being unable to cycle steel case(which is fine with me, I'd rather have a small gas port if I'm shooting an old school suppressor). I'd love to get my hands on an SR15 upper with the smaller gas port or the newer one if I had a KAC suppressor.
@Misc.munitions2 ай бұрын
@@armorers_wrench it’s been a few years. I didn’t know they changed up the port size. I knew they had different bolt options but that’s about it! I’d probably say this is the older generation. I think lol
@DirectThread2 ай бұрын
May the algorithm be nice to you. Great video and presentation
@Misc.munitions2 ай бұрын
@@DirectThread 🫡🫡
@Pacificplinker5562 ай бұрын
Check out the Defense Distributors Gl4pro edition for laser / ilum. Its FP, holds zero and is aggressively prices less than $500
@Misc.munitions2 ай бұрын
Just watched a review on this and it’s very interesting. Looking into that
@thewarrantedopinion2 ай бұрын
Awesome video! Looking forward to more content. Love the 14.5 general purpose setups
@LinearTactics3 ай бұрын
Can't lose with knights
@jaybee28123 ай бұрын
You still like it dude ? You think if you flip it around you’ll be able to run back up rear sight ? Thanks
@Misc.munitions3 ай бұрын
Oh yeah I love it. Puts it at a good height for NV for a diving board option yeah flip it I run it on my eotech with a qd. So you can take it off if it fails for the irons.