The New and Improved Stampede 4X4 BL-2S and VXL are out. Come and get yours today.
@joshuadavis8629 ай бұрын
❤🎉 Hey everyone I hope your having a great day Jesus saves repent and accept the Lord as your savior today if u haven’t he loves u and he died for us don’t get left.✝️✝️✝️✝️💙🧡🤍✝️✝️✝️😊😊😊
@PigglyWigglyDeluxe10 ай бұрын
Worst install video I’ve ever seen.
@cheesecake9336 Жыл бұрын
Pretty fast isn’t it
@cheesecake9336 Жыл бұрын
Speed
@CharlieViktor232 жыл бұрын
One of the most beautiful Summit i ever seen!
@bashingCZ2 жыл бұрын
To je ještě x-maxx 6S že?
@gallicak2 жыл бұрын
Kdyby se vyráběly a prodavali přijímače rovnou vodotěsné třeba i formou nějakého pouzdra tak nemusíme řešit přípravky jako je nanoprotech. Nevím pokud se mílím ale určitě existuje nějaké šikovné vodotěsné pouzdro na přijímače.
@danweiss49282 жыл бұрын
I know this is an older video where did you get that beautiful green desert racer body for the summet????
@renebeltran11092 жыл бұрын
Great review! I was wondering if you've tried the specific product for electrical insulation. This one you used on the video is better for moisture protection (corrosion) but as far as I know, it doesn't work fine if you want to prevent electronics short-circuits. Thanks in advanced!
@petrpetr93343 жыл бұрын
zdravim,. pekne a poučné. slo by udelat neco s NiCd bateriemi?? Hodne se jeste pouzivaji. jak se o ne starat,jak vybijet nabijet jak udelat baterie tvrdší atd na proudovy odber
@Ghostmaker363 жыл бұрын
Jesus hold the camera still and if you’re scared of it take it on grass
@GeorgeKushspecialisedvapers3 жыл бұрын
Dimensions please? I don't know how much is 1/10
@leechristie80573 жыл бұрын
How is that light kit fitted & where did you hide the wires ???😁😁😁
@kingkong2333 жыл бұрын
Very nice
@kingkong2333 жыл бұрын
Very very nice
@kingkong2333 жыл бұрын
very good idea, i tried the same
@Jbreon333 жыл бұрын
What is the rush? You aren’t explaining anything at all! The point is to explain how to do it. Wtf.
@crowsp973 жыл бұрын
You can't see anything. You need to zoom in or something
@HairBandDan3 жыл бұрын
I’d think a rock crawler would pull better but cool video anyhow
@hotracinghelpdesk72433 жыл бұрын
Nice work. A bit quick, but Hot Racings help desk approves.
@OllisRCCars3 жыл бұрын
Cool Video👍 I subscribed
@RadekLahoda3 жыл бұрын
Se divím,že něco nepraskne,takový nárazy..
@miroslavjezik84323 жыл бұрын
paradne vídeo
@uwerolliciao553 жыл бұрын
poor car :-(
@johnystage59513 жыл бұрын
jebat karantenu, pekne video :-)
@OllisRCCars3 жыл бұрын
Cool Video👍 I subscribed
@SpeedTherapy4073 жыл бұрын
Great video!!!! Love my X Maxx and love making videos of it in action!! I subscribed to your channel👍🏻👍🏻
@acrivation82393 жыл бұрын
DIY 100!
@peterhanic84763 жыл бұрын
Súper video
@skarebsuper4 жыл бұрын
so does it work well or not?
@RcstoreCzTraxxas4 жыл бұрын
No, not at all. Did not work for me.
@skarebsuper4 жыл бұрын
@@RcstoreCzTraxxas thanks!
@skarebsuper4 жыл бұрын
@@RcstoreCzTraxxas very strange, i see people coat this on their drone and it flies underwater..
@RC3DPrintAdventure4 жыл бұрын
Great place for a ride, snow looks brilliant! Good video.
@albertbohuslav45924 жыл бұрын
To je podle mně český švícarsko
@dynamiczna1114 жыл бұрын
👌
@happybirthdayyyy4 жыл бұрын
How did you get that low stance with the car??
@smashin_pikebc7444 жыл бұрын
I WANT ONE SOOO BADD!!!!!!! I might get one soon
@GosGosraider4 жыл бұрын
Yo, Nice video, j like UDR Rigid
@jcshobbiesandrecreation58734 жыл бұрын
Nice video but for those who are watching. I've done this to a pair of slashes. The first took me about 2 hrs to complete and the second was closer to 90 mins. It is totally worth the time and expense to do the LCG chassis.
@npc55694 жыл бұрын
Sorry guys but what does 13/54 mean?
@Valdemar-Perez-III3 жыл бұрын
13 tooth pinion gear to 54 tooth spur gear. That's the gear ratio being used on the truck.
@tominogte4 жыл бұрын
Děkuji za toto užitečné video....i já bych rád jako starší pard pořídil hračku na blbnuti (Traxxas UDR) a jako né úplně znalí ve vývoji RC baterií mi to velmi pomohlo. Takže děkuji!
@Jarhead13134 жыл бұрын
Is the body still available or did Proline discontinue it as well? I just got a Summit last week and have been wanting a jeep or bronco body.
@Inching.Islands4 жыл бұрын
BRILLIANT SHOW!!! Everyone can have a 1/24 mini track for their 1/24 mini truck 😀 Here's part of mine... kzbin.info/www/bejne/jaDUkJV_ftxmma8
@ChristianFarnellOfficial4 жыл бұрын
It's clearly sped up, that's why theres no sound....
@friktionrc4 жыл бұрын
actually its not speeded up...it really is that nippy/quick. As for sound...well I've had that problem where I've recorded with sound but when uploading to KZbin its mute 🤷♂️🤷♂️🤷♂️ Remember this is a 1/18th scale so its tiny compared to the bigger buggies from say Arrma/Traxxas/Losi etc....being small means its also v light making acceleration and change of direction a lot better than bigger models (and I own 1/10 scale Traxxas Rally 4x4, Rustler, Slash, a 1/12th GroundCrusher and a 5iveT. 😊🙏🤘
@faststongesdrc70754 жыл бұрын
What a nice location💪👌👍
@tomh76475 жыл бұрын
Is it easy to drift?
@jaroslavprochazka75375 жыл бұрын
Můžu se zeptat co je to za nabíječku? Popřípadě odkaz kde ji koupit.. děkuji
@RcstoreCzTraxxas5 жыл бұрын
Dden, na www.rc-store.cz www.rc-store.cz/nabijece/etronix-powerpal-touch-dual-100w-dualni-nabijec-liionlipolifenicd-a-nimh.html
@bencolley68835 жыл бұрын
What batteries are you running it on? Just bought one and it seems a whole lot slower than yours, can’t even get the wheels spinning on a corner in the wet on concrete and it seems really unresponsive
@oldskoolhunting3 жыл бұрын
Have you still got yours Ben? I’ve just bought two of these on eBay for my nephews and I’m kind of regretting not getting the bugsta’s instead as the carnage seems a bit slow in comparison when I’m looking at KZbin vids 🥴 I’ll see when they arrive I suppose 🙈
@bencolley68833 жыл бұрын
@@oldskoolhunting yeah I’ve still got mine but I’ve upgraded the life out of it 🤣 it’s got a 4000kv brushless hobbywing max 10 in it with alloy chassis and arms with carbon towers and it’s pretty damn quick, had to put a wheelie bar on it, also changed the wheels as the stock ones are crap, I’m running 2s lipo, also had to put in steel spur and pinion coz it just melted the plastic ones, the bugsta and carnage are basically the same with a different shell all the electronics in them are the same lol
@PajaSP025 жыл бұрын
Ahoj,díky za poučné videa.Chtěl bych se na ,,stará" kolena vrátit k modelařině a tak scháním info co je nového a tak se mi takováto videa hodí.Mám tři dotazy : 1) zatím jsem na zahraničních fórech našel info,že údajně ,,Rychlo-nabíjení" se používá ,,když není čas" (nechat odpočinout a vychladnout... články) a že ani nenabíjí do plna (prý Li-XX článkům nejvíc svědčí práce někde mezi 20-80 procenty vlastní kapacity).Je to tak ? 2) popisujete tu jak zacházet s Li-XX články,ale ani u Vás ani nikde jinde jsem nenašel informaci jaká je životnost při správném zacházení ? 3) Nabíječky pro Li-XX některé mají uvedený program ,,Uskladnění/Storage" ,ale některé ho v popisu nemají uveden.To znamená že ho neumí a nebo to umí všechny a jen to zapomněli prodejci uvést v popisu na svých stránkách ? Děkuji za radu.
@RcstoreCzTraxxas5 жыл бұрын
Zdarvim... no... Ad 1/ je to tak, rychlo nabijeni je proste rychlo nabijeni. Nejlepsi je balancni nabijeni, kdy se nabijec snazi vyrovnat napeti na clancich. 20-80% --- o tom jsem neslysel. Ad2/ to nelze vubc rict, Obecne ze zkusenosti cca rok az dva maximalne. Opotrebeni se pozna tak, ze uz baterie nedava vykon a ze lze hur vybalancovat. Ad 3/ nektere to neumi, ty jednodussi.