Пікірлер
@paul41to45 8 күн бұрын
Looks good
@parsonsenergy 7 күн бұрын
Tanks..
@Fritz-pu1ng 17 күн бұрын
Don't forget the Teflon tape between threads, Frank! You been busy I see.
@parsonsenergy 10 күн бұрын
Tanks for the friendly reminder Fritz..
@rotorguru9702 Ай бұрын
Love to see it. All of these kids with zero attention spans sucked dry from TikTok expecting polished results and no inventive creativity. Not many your age putting out youtube videos, so I applaud you!
@parsonsenergy Ай бұрын
Rotorguru9702 . Thank you brother. I believe 90% of hyperactivity is diet related and 100% sugar/carbohydrate overload... much like our diet since the fifties.. anyway, if you think like a kid and act like a kid then you're 66.6% kid. Being that much kid, intrinsically, makes you optimistic. So I don't harbor your degree of skepticism when it comes to youth. Our job is to fill their empty heads with a methodology of teaching themselves and how to go about creating a need for information to solve problems of their own making. Tanks for your support..
@mnshp7548 Ай бұрын
please post a vid of this working next, id love to see this in action. Not sure if you mentioned this in the video but you could use Arduino and some relays to accurately control and change the timing of the fuel, it could operate the injectors on a certain time sequence and then doesn't rely on needing anyone pressing buttons. Do these work on vacuum from the hot combustion gases ?
@parsonsenergy Ай бұрын
mnshp7548 That was, is and will be the result of this year long effort. Getting the shop ready (what Elon calls stage zero, infrastructure) to even do this rudimentary research has been an arduous task. Just getting a H2 REG and H2 has been demanding on a SS budget as well. Regarding the use of Arduino's has always been the goal, however, not having any experience with micro controllers and programming has been an impediment to some degree. As I have said before, some of these mundane videos are for the edification of a few of my younger subscribers. My goal has been to show these kids how to massage their inventive needs needs around the use of junkyard parts and cheap off the shelf parts. Please be patient, I cherish people like you for taking the time to comment and give me feedback. Tanks
@enzofitzhume7320 Ай бұрын
Please remove this video!
@parsonsenergy Ай бұрын
Why? It's just depicting a step in a process. There is no other technology like this. This is the research part of R&D.
@PaulPassarelli Ай бұрын
WTF? I feel stupid for even watching this.
@parsonsenergy Ай бұрын
Paul... The purpose of these videos is to elucidate a creative process. In this case (a water well pump powered by hydrogen) I had postulated that I wanted to make a photovoltaic powered water pump that has no moving parts. This video's relevance to the overall project was to create a learning experience on how a detonation can be created and managed. I thought starting with acetylene and air would be a viable 1st step in that direction. In the ensuing videos we will see how a 'proof of concept' is approached and ultimately brought into existence. As far as being stupid ? Far from it! You were attracted to this video because of the word 'detonation' ... which makes you smart! Give me enough time to prove the 'processes' efficacy and the development of something that has never existed both conceptually and physically...
@fascistpedant758 Ай бұрын
"Stupid is what stupid does". I'm not as stupid as you cuz I skipped through 95% of it.
@paul41to45 Ай бұрын
nice, my Skype replies are not getting to you, but I see yours
@snicks50 Ай бұрын
Not many care to see your shitter problems
@paul41to45 Ай бұрын
Great looking engine
@parsonsenergy Ай бұрын
Tanks Paul.. it’ll be even better when it’s set up to produce electricity without using any pulleys..
@chowchowtales Ай бұрын
Super nice shop you have set up
@parsonsenergy Ай бұрын
Thank you.
@RustyInventions-wz6ir Ай бұрын
Very nice work sir
@nickking8317 Ай бұрын
Should be in steel cap boots not slides
@paul41to45 Ай бұрын
Is this good for old expiring inventors also?
@parsonsenergy Ай бұрын
Lol Yes. It takes one to know one, though,,,
@tjs_welding_and_fabrication Ай бұрын
Subed. Yes. Shops get messy quick. Amazing how many tools we take out to perform a sub task of a whole project. Sometimes I have to stop, clean up and put tools where they belong. Start clean and fresh, then repeat soon enough later on.
@parsonsenergy Ай бұрын
Yes TJS .. you must have been in business for some time. It seems like we make a decision to finally stop expending our time looking for shit rather than knowing where our shit is.. Thank you for your comment and support.
@MannyVanOss 2 ай бұрын
Why are you not just using a cutting tool on the lathe to clean the tank up?
@parsonsenergy 2 ай бұрын
For that big bottle we had already cut off the bottom which weakened it and when tightening it up in the chuck it was so deformed the runout was unacceptable… since this was our first use of the clausing for doing these Bells.. the next bottle will be ‘chucked up’ complete (with the bottom intact.. after polishing we’ll then cut the bottle to the lengths we want.. which is another process … ‘Tuning’
@MannyVanOss 2 ай бұрын
@@parsonsenergy I have made these bells from old expired, retired oxy/ace bottles that haven’t passed inspection “purged of course” and they make a nice tone, I usually will plasma cut designs in them for customers. What will you use for the ringer weight?
@MannyVanOss 2 ай бұрын
I use old cast iron window weights
@parsonsenergy Ай бұрын
@@MannyVanOss Thank you Manny for your comments. We have gradually been bringing our Clausing lathe back to life after it sat in the elements for 25 years in our desert.. This bottle was started after the end was cut off making it weak and unable to true it up... When we get another bottle we will chuck it up with its' ass end intact. I'll do another vid when we get time. As far as a clapper I am pretty sure it will be an Oak branch about 6' long and 12" to 18" in diameter. A really dead weight that produces a low pitch when struck from about a 75* angle.
@gjones002charter 2 ай бұрын
YOUR FLAG IS BACKWARDS !!!
@parsonsenergy 2 ай бұрын
Thank you for the observation. i'll be correcting in the morning.. Totally negligent . .When hanging the Flag against a wall, vertically or horizontally, the Flag’s union (stars) should be at the top, to the Flag’s own right and the observer’s left.
@mauricioescobedo3354 2 ай бұрын
Looks like Ray Charles laid those welds down with his feet. Looking good man 👍
@parsonsenergy 2 ай бұрын
Tanks but eye don't see the joke..
@mauricioescobedo3354 2 ай бұрын
@@parsonsenergy Was a reference to a Roadkill episode when Finnegan welded his first set of headers for the 55 and they stopped at Big Chief’s garage from street outlaws.
@parsonsenergy 2 ай бұрын
@@mauricioescobedo3354 I thought my response was funny considering not being aware of your reference. Tanks for your support Mauricio..
@zmscott2507 2 ай бұрын
The title of this video is increadibly deceiving!!!
@mikeoltmans9401 2 ай бұрын
u lost me at gender specific robot good luck with your channel lol your worse than the people wanting gender fluidity lol
@parsonsenergy 2 ай бұрын
It's a statement that reflects the state of dysphoria that's occurring across our country and a poor attempt at levity. Even though I was referencing one aspect of what the word 'dysphoria means I was also referencing its' general meaning: Dysphoria State of feeling unwell or unhappy; a feeling of emotional and mental discomfort as a symptom of discontentment, restlessness, dissatisfaction, malaise, depression, anxiety or indifference dysphoric is a word which, I believe, is a good descriptor of where our society is at this moment. Thank you for taking the time to comment. If you like dialog please subscribe.
@paul41to45 3 ай бұрын
watch out for inductive loads, they can be sneaky
@parsonsenergy 3 ай бұрын
Tanks for the heads up Paul41… this is a full (smooth) sine wave so there should be little hysteresis…
@stayoffthischannel 3 ай бұрын
SALTINE-SPLOSION
@parsonsenergy 3 ай бұрын
And garlic aftermath... Yeah, the package wouldn't open.... tanks for noticing...
@paul41to45 3 ай бұрын
Looks scrumptious
@parsonsenergy 3 ай бұрын
Tanks
@Timeline916 3 ай бұрын
What injun she gut?
@parsonsenergy 3 ай бұрын
It's got a 350 with a 350TH...
@MrTomjolly 4 ай бұрын
I had a 69 Chevy Panel Van. I loved not having windows in the back. Even the back doors. Just a little six but I love that van. So fun to drive.
@parsonsenergy 4 ай бұрын
In 68' i was an AT&T messenger using 68' chevy vans.. the way I drove them put em' to the test.
@chrislopez349 4 ай бұрын
7:55 That is Hexion wildfire wrap
@paul41to45 4 ай бұрын
good job
@parsonsenergy 4 ай бұрын
Tanks Paul 41
@brianpittman9460 4 ай бұрын
It makes me hungry when I’m trying to fast. It looks mighty tasty and I know that if I could smell it My fast would be over! Keep up the good work Frank! Cheers from El Monte! BP
@Fritz-pu1ng 4 ай бұрын
Good job Frank!
@Fritz-pu1ng 4 ай бұрын
Just add street taco shells ,(flour/corn)to complete 🌮.
@parsonsenergy 4 ай бұрын
Yes , i woulda had beans and rice and flour tortilla in the old days. Tanks Fritz..
@paul41to45 4 ай бұрын
BTW, humans are omnivorous, what species are you?
@parsonsenergy 4 ай бұрын
I guess I am a carnivore since I eat beavers...
@paul41to45 4 ай бұрын
@@parsonsenergy I tried beaver, prefer pussies instead
@paul41to45 4 ай бұрын
sweet, looks good
@paul41to45 5 ай бұрын
that is awesome, how about a load cell to see what kind of thrust its giving
@parsonsenergy 5 ай бұрын
Back in 93’ I used a digital scale to measure the thrust of the mini jet.. it weighed 24 ounces and produced 12 pounds of thrust 1/2 pound of thrust per ounce of engine weight… That’s pretty impressive..
@rdbchase 5 ай бұрын
"excetylene"?
@parsonsenergy 5 ай бұрын
It's spelled acetylene. Acetylene (systematic name: ethyne) is the chemical compound with the formula C 2H 2 and structure H−C≡C−H. It is a hydrocarbon and the simplest alkyne. This colorless gas is widely used as a fuel and a chemical building block. It is unstable in its pure form and thus is usually handled as a solution. I use this for its' ability to detonate.
@rdbchase 5 ай бұрын
@@parsonsenergy You say "excetylene" -- there's no "k" sound in "acetylene".
@parsonsenergy 5 ай бұрын
@@rdbchase Yeah Chase, you got me there,however, asking for ethyne at the supply shop doesn't get me my refill. Saying Accetylene works every thyme. I appreciate your penchant for detail though, the purpose of this series of tests and rudimentary setup was to validate i could actually create a detonation. I did two things ,namely, I created detonations of varying intensity and I can vary the frequency of operation. Tanks for your support Chase.
@parsonsenergy 5 ай бұрын
Tanks 41 4 your support..
@paul41to45 5 ай бұрын
nice setup
@skysurferuk 5 ай бұрын
Audio that works would help a lot. Interesting. 👍
@parsonsenergy 5 ай бұрын
Tanks Sky.. I just noticed that when I hold the camera in my left hand it gets muted.. I hope you enjoy development of this pump.. today didn’t go as i anticipated.. lol that’s why it’s called experimenting…
@christopherleubner6633 5 ай бұрын
Years ago i built a travelling wave pulsed detonation rocket motor. It had the internal baffles designed so the shockwave was collimated into an exhasust stream of hypersonic speed a few feet from the nozzle but was cool nonetheless. It sounded like a very angry bee and a machine gun had a very ugly baby. Acetylene was too prone to detonation in the wrong places but a mix of oxygen, nitrious oxide, Methyl propylene, and ethyl ether worked well. You want it to create a bunch of smaller shocks to confine and compress the fuel mix in the center a few cm from the nozzle exit. You want a highly explosive but lower power mix on the edhe but a less explosive but far more powerful mix in the middle. Slightly curved bits of metal on the housing gave it the needed spin. Needless to say it didnt live very long being made of literal scrap metal. 😂
@parsonsenergy 5 ай бұрын
Tanks Chris… utilizing the TWD approach to PD (pulsed detonation) is an avenue to pursue, however, this pump application is more of a paradigm shift in what the concept of PD technology conventionally has been thought of.
@armpitdew 5 ай бұрын
Is the video mirrored? The flag looks like it’s hung incorrectly.
@paul41to45 5 ай бұрын
awesome, you are on the way
@parsonsenergy 5 ай бұрын
Tanks Paul … Yes it’s taken considerable effort to get to this pivotal moment..
@joyceseaver9350 5 ай бұрын
Great Video ! Love the ride part and the follow @ the end ! ❤ Had a 66 Chevy in the 70’s and ‘85 in the 80’s then a 92 traded for a 95 GMC Tiara Factory Conversion ( real comfortable, like a Caddie ) sold it and in 2005 found a 65 trophy winning show van in Connecticut . Like being 18 again ! Was a Rock Star every time I went to gas up ! What a life !
@parsonsenergy 5 ай бұрын
Tanks Joyce.. here in Cali we have to get 76’ on down to beat the communist regime’s ‘smog’ b.s. I’m looking forward to getting a Holly port injection ,data acquisition controller…
@chowchowtales 6 ай бұрын
It's your turn now. They put in new poles in our neighborhood in the last year and a half. Huge project. They told me the poles we had were the originals from 1930's !!
@parsonsenergy 6 ай бұрын
Yes they have been in our neighborhood since before snowmageddon as well.. tanks 4 your support
@mauricioescobedo3354 6 ай бұрын
Thanks for the safety note, usually when I rip one I tend to leave skid marks no mater where I do it.
@parsonsenergy 6 ай бұрын
I knew I shoulda posted this on the ‘shorts’.. I hardly use this feature so if you need any there’s plenty for you to work through.. Try the carnivore diet less likely to do a Biden…
@chowchowtales 6 ай бұрын
It's always fascinated me how windows are installed.
@parsonsenergy 6 ай бұрын
Tanks Chowchow..
@rdubinda239 6 ай бұрын
I certainly hope you don't plan on putting hydrogen AND the oxidizer down that plastic tube already mixed together. The flame will propagate backwards down that pipe and blow it up. Ya might want to consider having them mix in the "detonation chamber"
@parsonsenergy 6 ай бұрын
Tanks Rob for paying attention! The truth is that both H2,, Acetylene , Methane and O2 will require a series of isolating techniques (checks) before being introduced into the detonation chamber .
@RustyInventions-wz6ir 6 ай бұрын
Very nice work mr
@parsonsenergy 6 ай бұрын
tanks Rusty.
@BENGLASBERKAHCHANNEL 7 ай бұрын
Have a good activity my good friend 6:24
@nickking8317 7 ай бұрын
What's the little lathe a Rockwell?
@parsonsenergy 7 ай бұрын
No, it’s a Logan..10”x48”…
@BENGLASBERKAHCHANNEL 7 ай бұрын
Membuat seperti itu..membutuhkan berapa hari 9:22
@mauricioescobedo3354 7 ай бұрын
How much is a building like that cost, concrete and all ??
@parsonsenergy 7 ай бұрын
As awesome as Ken is doing it probably 100k maybe more by the time it's finished..
@mickaelwarren9073 7 ай бұрын
I wish I had an old truck
@parsonsenergy 7 ай бұрын
Yes they are fun and sometimes frustrating, too.