Thanks

Assalam alaikkum. Which type of data require Response surface methodology and why? Could you please explain?

Kindly upload your lathe machine simulator part 2,3 and 4. Thanks

Hi Sir, can you help me clarify this? Using CDD i imput three factors for temperature , time and inculum concentration for B. Infantis.. Hence my minimum for inoculum concentation was 2.5 cfu/mL and Max 7.5 /mL, then for Tenperature: 35, and 44 then fortime, 0 and18 and I seem to be recording some outliers outside my selected range. What do I do please. Am sad and confused please help me

Thank you amazing

thank you so much 😺

Thank sirrr

Thanks. I've been looking on how to input severel levels of data instead of just low & high.

thank brother

Thank you! Quick question, how do you change the name on the "analyst" section on the pdf itself?

can u share file link pls?

Mr, im very new to RSM. What is the difference between stdorder & runorder?

Thankyou so Much Sir.

Thank you so much 🙏🏿

Question : In your process you are ranging the pressure range from 220 up to 732 PSI and temperature from 32 to 68 oC, but minitab is proposing pressure of 114 PSI and 838 PSI as well as temperature as low as 24.5 and as high as 75.5 oC. In the real life this might be unsafe to test. What would you propose doing?

Very Smart Man

Thanks for sharing Sir. Very much useful

Amazing video, my professor gave us an assignment to do just this and he didn't give us any notes on how to do it. Thank you so much!

Instead of getting only high and low values, how can we get the values with multiple levels? One reference had levels at -1.682, -1, 0, +1, +1.682 for the time, temperature and pressure. Also, if you have any video regarding this, please share the link as well.

Thank 🔥

Please the link of download of ansys cfd

Thank you.

You didn't explain how you correct it

Very useful and easy to learn. Thanks

Great Minitab explanation thank you for the insights, I really need this for my experiments studies

how to change plot title?

I have run the experiment and have my own factorial design.. can i just analyze the data using my own factorial design.. How should I do?

hi, I'm working on laser-assisted turning and currently experimenting with five parameters: depth of cut, feed rate, spindle speed, laser power, and laser angle (the distance between the laser spot and cutting edge). Initially, I opted for a face-centered central composite design. However, I've noticed that when the laser power is set to 0 (indicating the laser is off), the laser angle becomes irrelevant. I'm uncertain about the appropriate experimental design in this situation. Could you please suggest a method or name for this scenario, considering the disregard for laser angle when laser power is zero? Thank you for your insights!

that was realy a good video,i'm from INDIA working on taguchi method. it was really a helpful video

how about chapter number is roman, but the caption is numerical. EX: Chapter II, the image caption is 2.1

by using this software, can we adjust the roughness of the wall pipe? i need to compare the flow difference between any materials of pipe for my study.

Ya just can't paste in Max Load values as you did. The values need to line up w/ the factors at the particular levels.

Well done; thank you. One question though: your variables have 3 levels (Categories I assume). Why did you select theme as "Continous". Thank you :)

Thank you so much .

When to select block and when to select unblock? Could you please clarify

poor articulation. but thanks

Thank you 👍👍

In my case, my heading is CHAPTER 1 INTRODUCTION. So I set heading 1 for "Introduction" also which turned out the root cause making the 0 error. I suggest you set chapter name e.g. intro, research method... to normal wording and just remain "Chapter 1"....as heading 1. Hopefully this helps!

Thanks for video big like 🌹🌹🌹🌹

This is so good. I would like to learn more about this in the future for my PhD topic. Thank you.

I found that in my case, i accident addeded empty heading slot after 1st heading i erased it then problem solved.

It seems that the Rsq is too small indicating that the range of x factors are not adding value to the model.

Thanks, helped a lot

what is factor of safety

Thanks a lot 😊🙏🏻

Thanks for giving a detailed, step by step explanation of using fluent for ploting contures, vectors & graphs for venturimeter. My best wishes for your upcoming creative venture

Sir Im not getting simulation report....which version are you using? and is it crack or genuine ?

If the box in the initial step at min 2.11 for example 10 continuous factor, and it is blank. What does it mean?

thank you! how do you interpret p-values there?

Thank you ...this video was very helful