Yes, it fits in my garage, the car wash and parking ramps. That was one of my concerns with the 6" lift but i went to the auto show and measured others with the 6" and they were under 7ft. I believe mine sits at 6'10" or so.

@el mando, you would need to talk to your specific dealer. I purchased an exteded warranty up to 150k and the dealership called the warranty company to see if they would cover it and they said as long as it 6" or less they would still cover it. Many dealerships sell the sca trucks that are built very similar to mine so i would suggest dealing with one of those. I had everything done through the dealership prior to taking delivery of the vehicle

Yes. You can do multiple different widths when it comes to tire/rim combos. It all depends on what you want the appearance of the side wall to look like but that set up is very common.

Thank you. It sits at just under 7' it's like 6' 11". I was concerned that it wouldn't fit in ramps or the car wash but it clears with ease

@@mrg.8823 cool I was thinking about a 8 inch lift but that 6 looks great and it still allow you to fit in places that 8 inch won't. Thanks bro

Thank you, I'll look into that. I appreciate the info

🤣🤣 happy guy. What's your ideal running board. Just curious? I could have put any running board on the truck that I wanted, the ones I chose matched the look I was going for so I'm more than happy with them.

@@mrg.8823 amp powersteps.I feel that

Hi, I ordered everything from the dealership. When the truck came in they had a shop they work with pick it up (tm autosports) and put everything on it. I purchased the 6" BDS Lift with fox shocks. My exhaust is the Borla S type which they installed as well. I also added a extended warranty through the dealership which I normally don't do but considering all that was done I wanted to. They checked with the warranty company and they said my 6" lift would NOT void the warranty. That warranty is 10 year, 150k mile bumper to bumper basically.

Sorry, I forgot to mention I have the standard bed. The standard bed, sun roof, 6.2 combo was non existent when I purchased therefore I had to do the special order.

100% no reason to lie. I had a 2019 duramax with a leveling kit that rode pretty rough. With the fox shocks my truck rides great. Believe me or not, doesn't matter to me.

@@mrg.8823 its all good. Just giving you shit.

I guess it's possible if you have the correct offset and a 10" wide tire. My tires are 12.5" and they definitely rub in reverse on 3/4-full turn. I don't get any rubbing in drive. I also have a 6" lift so I'm sitting 2" higher than what you are (2" trail boss lift+additional 2"). If I had to guess, you will need some trimming at the very least.

@@mrg.8823 Thank you for the info and happy holidays!

@@bryondrill9239 you as well!!

The winter rims and tires i have on it now have more side wall. I did 35in Falken At3s with gun metal fuel blitz 20" rims for the winter

Thank you. I get roughly 345 miles to the tank. To be honest I'm not 100% positive on the tank size. I think the 6.2L has more to do with the gas mileage than the tires.

I just ordered the gun metal 20" fuel blitz rims for the winter with 35" Falken wildpeak At3's. Hoping that setup looks nice. The ridge grapplers seem to slip in the rain so I can't imagine they're the best for the winter.

MrG. 88 Nice, make sure you post a video when you get them on. I think it will look awesome.

When I originally called custom offsets they told me a spacer was recommended but when I had everything installed at TM autosports they did not need one.

Yes message me your number and I can give you a call if you want

MrG. 88 740 516 2543

@@christianwelch2069 I'll call you now

@@christianwelch2069 did you ever do the build? I just bought a new one I want to do the same build scared about losing power in the rear end.

That's a 1st. I haven't seen a post from anyone other than you that has a 2020 with 35s that hasn't had to do trimming. I don't rub while in drive, only in reverse at full crank.

MrG. 88 mine came with fender flares idk its blowing my mind i need to figure this out

@@Blackocalypse yours might have rolled fenders

or 20" rims?

No. It is a 6' 5" standard box. The short box is 5'8" I believe.

true 6.5@@mrg.8823

Honestly, I'm not sure. I'll try to find out and note it on here.

BDS covers all parts of the lift as long as you register the lift with them after installation. Also, if there are parts the dealership will not cover as a result of the lift being installed then BDS will deal directly with the dealership from my understanding. I believe I paid right around 8-9k for the tires, rims and lift installed. I know custom offsets wanted 7k for the rims, rires and lift without install. The bed cover was 1k installed and the Borla s type exhaust was 2k installed.

All minor with free fixes

all have problem good friend lifetime fords buying fleet gmc cause ford problems

Borla has multiple options to order from. Black tips, chrome tips, no tips. I ordered the no tips because I liked the factory look a lot. It was also $150 cheaper or so.

@@mrg.8823 I have nearly the same truck as you...Summit White 2020 Silverado RST, 6.2L, Z71, All Star, Crew Cab, Standard Bed, leather, sunroof, etc...It's So Sick! How did you get the Borla S Type on your truck? Borla doesn't make it to fit the Standard Bed...I'm guessing they had to weld on like 8" of pipe??? I've not seen another one like ours...I'm sure they are out there but rare.

@Grhino TM Autosports in Burnsville MN put it on. When I picked it up they mentioned the exhaust was for a short bed but then they supposedly contacted borla and were able to get an attachment I believe. When I ordered mine there wasn't another standard box 6.2 fully loaded with sun roof anywhere in the U.S. I'd love to see yours!

@@mrg.8823 I just got it last week...It's all stock...nowhere near as nice as yours yet but I'm planning the build now. I did an exhausting search through Chevrolet's dealer inventory and finally found one in Whitefish, Montana, lol! I'm from IN. I had it shipped here. I'm gonna do the same BDS 6" lift...torn about doing new coilovers though...? Thinking of a custom white and black Forgiato wheel...I love the sound of your exhaust...probably gonna do the same thing you did. When I found your video, I was so stoked! It was Exactly what I was searching for... it's actually how I came to find you. I thought I was gonna have to build it like you did but they quit making the 2020 in Sept and there is a wait to build a 2021. I got lucky and found the only other one in the country. There was one in MD but it wasn't Z71 & no sunroof. Trust me...we are the only one's...pretty cool! I think I saw your number on here somewhere...I'll text you some pics of her.

Oh Snap...I just sent Christian (the guy on here who asked you to call him) a bunch of pics, etc... I thought it was your number, duh...lol... Anyway e-mail me @ [email protected] and I'll send you the pics you asked for.

Thank you!