Yo primo how did you do the remote and gound n power cable I been looking on how you did it I went to your channel and couldn’t find 1:39

Bro were your power wire for dsp coming from??

How is the chime box hooked up I can’t find anyone that has a procedure for hooking it up

Can anyone help me i took my truck to get these exact shackles and block removed came back sagging from the passenger side and the leaf spring on that side is squished together like the bottom part of the leaf spring is squished with the rest and on my driver side it has a gap

Bet

Power accoustik is gas! I hit 144.5 on 2 gothics.

Installation was super clean.

Bro what length rca’s did you use?

Do i use both remotes, the amp and the one to the epicenter?

I just bought a 2017 Silverado and I don't like the rear sitting so high. My plan is to lower the rear as you did instead of front lift. I don't want to buy bigger rims and tires to make it like they fill the space. I will never do any off roading so there is no reason to have a lifted truck.

Bro I’m trying to buy one but what setting did you adjust your epicenter ?

Serious question and I hope you respond. Back in 97 when I was finishing up high school, I did a few installs and not just my vehicle. I was good at it but over time real life hit me and wasn’t doing it anymore. Last vehicle I had was a 2005 impala and I was told because it had the compustar addition and the vehicle security was tied into the factory radio, I’d have to have my aftermarket radio/cd player professionally installed because there was some “box” they had to install for the security/compustar that was tied into the radio. Sorry for the long comment but I’d like you to hear me out. I wanna install a system in my 2013 Silverado. I can do everything as long as the radio/head unit doesn’t require any additional equipment…. So my question is, is there any additional equipment/hardware I would need to install or is it just as easy as 90’s vehicles where all you do is add the wire harness?? Thanks

Where the video for the fuse that u created

Is there a difference on why mine dont work i have a epicenter micro and i see u have the regular one

One video says don't spray everything this video spray everything 🤣🤣🤣 who's right

Where is the acc wire from the truck? What wire is it? I can't find mine for the truck.

👍👍👍

Did you use stock shocks? How does it ride?

Did u have to run a 12v power wire to the battery for it to power on with the harness?

Is the little 3amp fuse connected only to the power wire?

Can i pull this year of grille on my 2015 Denali without any cutting?

I have a 07 Silverado new body and put in a jvc double din and doesn’t work. Any chance you have wiring info. I thought I hooked it all up right, was a factory sat nav system before and didn’t wire in to keep steering wheel controls

I hope you ain’t got the wide and the sweep turnt open 🤦‍♂️for Banda you should want the wide at 3-6 o clock position and the sweep at 11-12 o clock depending on the tuning of your box and hint hint if you really wanna do something extra mess with the voltage or the chip in the epecenter

What spray did you use ?

How much better was the audio control epicenter from the other cheap one you had on your tahoe?

Good video bro learned something new

Yea it looks good! I just got a 2018 Silverado and I’m going to have the same thing done

Not a bad idea to refill the filter.

Did you have to tune your epicenter

Did you have a factory amplifier?

Thanks a lot

Thanks for the video! It was helpful!

very helpful

Perfect stance!

What brand tint did you use want to learn to tint myself

Hell yeah , good video bro 🙏

Ey pa what’s the setup what amp and subs you bought I just bought my 2013 Silverado and trying to add a system

Where did you mount the black box to

Is removing the block dangerous or will it cause any damage?

Looks nice !! Wonder if you just have a solid white ? I seen all the colors looks nice.

Can you use speaker wire for the wire power and ground

How did you make the wireing for the epi center

Where does the red wire go from aftermarket harness not radios

I got a question is the 5% of the lexen film easier to see out of at night then a cheap brand i did my truck with some auto 5% and i cant see anything at night and i hate it

why did you even add a fuse im so lost because of this im in the process of hooking up a soundxtreme st-ap6 and im doing all types of research and im finding other videos that say u dont even need a fuse so im a little lost in all this especially what size fuse i need bc i have kicker compc 12s daul box so idk what size fuse to get can some one help me

The radio is pioneer avh-1500nex correct? And will it come with the conectors to connect to the radio bolting area?

Did you splice you remote turn on off from your amp in the epicenter

So to add a 4channel amp you hook up rcas to the output on the amp then run rcas to the input on the 4 channel amp ?

Thank you. There's thousands of videos that explain but don't show the process very well. 5/5

What wiring harness did you use ive been looking for a harness for my 07 Silverado for FOREVERRRRRR