if the switch fails will it fail in the on position (fail safe)

Awesome video very informative. Question...planning on using two Jeti R3/RSW receivers into the Smoothflite 16 ports. Should I be plugging into Port 3 (Control output) or Port 4 (Ext) on the R3/RSW receivers?

Can you setup a Jeti remote switch with the SmoothFlite system?

Great work! Please don't refer to mA when it should be mAh... The 'battery used' unit is mAh...

Thanks for this

This is great. Thank for posting this, it answer a lot of Jeti questions. Any chance you could post a setup with the Jeti using the ARXL in place of the Central Box?

You said that it is fully compatible with Jeti. Will it recognize and accept the Jeti Central Box 100 input? I want a one wire output from a multi servo part on the airplane (using the central box) to plug into one port on the AR Smoothflite.

Thanks, Rick. When I set my Smotthflite 16, I'm getting many drops in the receiver signal. I use Futaba. How many drops are bad? My receiver antennas are not touching carbon fiber. I even have them on top of the model to see if the drops go away, but they don't.

Awesome 🙌

Good video but please change or mark the servo arms WHITE as you cannot really see what happens...thanks guys.

Would be nice to see the SF10 pro using elrs protocol

What about exponentials ??

How about spectrum

Now Futaba 😃 Greetings from Switzerland

I wonder how this compares and performs against the Demon Cortex with 3D and XA flying

Will this work with older JR/Spektrum DSM 2 Radio?

You didn’t mention anything about servo voltage. When are you going to design a system with adjustable voltage output for each channel?

Interested, but any chance you could do a tutorial for Spektrum RX? Thanks

Hi, will heading hold and "normal" more be tx switchable in flight?

Fantastic I will get a couple. When will a FW update happen to the ARXL SF 28 output pins to support Futaba and FrSky 24 channel Rxs?

You should also start working towards new group of RC pilots that uses CRSF receiver protocol. If you would incorporate CRSF receiver protocol in your redundancy smooth flight systems, you would be the first company to do that from those major brands that are usually associated with big scale models.

These looked amazing at Nall I definitely want to try one! When do you anticipate availability on website?

I also like to know whether it is switchable between 6.4 and 7.4 volts? Is it all the V2 or how can it be recognized?

I'm in love with the exo blackhawk 3pro. But I'm listening to this because it's indeed refreshing to hear someone talk about drones without mentioning "dji". Nice drone, i may add it to my collection.

why flaps when hovering ??

How's the roll rate?

Why don't they come with the little mount for the led bulb.

Question, does it come for HV from the factory? Thanks.

Can you please do a video on how to set up hover mode???

Does smoothflite with latest Jeti Duplex EX R3/RSW 2.4GHz Receiver & RC Switch w/Telemetry?

I noticed your flight log shows over 54,000 holds which is what I am getting on my turbine with my ix20SE and Smooth Flight 16. Is this normal?

How do you know it's version 2? Is it different from version 1?

I use Electron gear system GS200 . I want to keep using the electron system to control my gear control and brakes. How do I bypass the AR system for gears to use the Electron system instead? Thanks

Is the AR EXTREME RRS shell made of metal or plastic?

Hello Can you extend the receiver leads with servo extensions or do they have to connect directly to receiver thanks

One of the aileron going down and the other one going up, how change that on crow or flaperon only?

Hi all I hope I will find an answer to my problem here. I received a Smooth Flite 16 RRS and Ignition T-Switch, the Smooth Flite 16 RRS did receive the latest update. I plugged it all in with 2 Duplex Rex3 A20, from Jéti and I drive with a DS16 G2. All material is up to date. As far as the telemetry of the Smooth Flite 16 RRS is concerned, no problem, I have the feedback regarding the batteries and the 2 receivers. On the other hand, as far as the Ignition T-Switch is concerned, no telemetry feedback on my transmitter, the Kill switch works well, the LED turns on and off depending on the position of the switch on my radio. For your information, I wanted to mount this on a UMS 150cc 5 cylinder engine. Thank you for your answers.

I fly futaba in giant scale aircraft with 8ch recever&6volt battery,and that is all that is needed!.. .

How can an SPM9745 be connected to a current receiver (e.g. AR6610T)? Which port or which pins should I use on the receiver? XBUS?

Great product.

I think what people need to see too is how and what you assign to those elevon channels. It seems obvious but I know people think it just works without doing anything else.

Id love something like this for heli but where it didn't need matched batter. Being able to use the main flight pack primarily and have a small back up receiver pack would be pretty cool and useful on a lot of smaller scale vehicles.

Could you guys do a video on using express lrs with the smooth flite 16?

Which chemistry and voltage?

Looked great Rick

Can you use the a 8020t and then hook two more satellite receivers to that so you can end up with three satellite receivers instead of only having two that come out of smoothflight

How do we update please?

Hi, Now spektrum released a new nx 20 shouldn't have any problems with the protocols on the ARXl smoothflite

if using 2x jeti receivers in "clone" mode, are there any different settings needed on the SM 16 to support this vs "dual path" ?

Just recently purchased I wish the had a Starr to finish set up...this seems very complicated to get started...but I heard so many great things about this product