Those old baja tires were actualy fine they are in abut the same conditon as mine and they take the abuse fine
@YodagaveАй бұрын
Keep going!!!
@speedsharkgarage1787Ай бұрын
Thanks!
@TooLoudBearАй бұрын
That sucks about losing the shop.
@speedsharkgarage1787Ай бұрын
We will rebuild!!! Ha
@damienarrazolo6764Ай бұрын
Good luck finding new place! 👊🏽✌🏽
@speedsharkgarage1787Ай бұрын
Thanks!!
@jerryhundley4111Ай бұрын
All that time figuring out how to lift it and you two could have picked it up and carried it onto the trailer.
@user-yt4ut4ff7uАй бұрын
I like the stock sound of pea shooter exhaust. It’s that VW chirp I love so much. It’s not a power set up for sure, but its own distinct sound.
@howdrums909Ай бұрын
I have the same bike (1999 TE610) Seems there are a lot of subtle changes over the years so finding someone with the exact same year is pretty cool. I'm currently trying to get mine running after a few years sitting do to health problems. I cleaned the carb up but haven't gotten it to start up yet. Fuel line routing is a nightmare but I think the diagram you showed helps to simplify things. Also, the inlet on my carb is facing straight down so I just run the piece of line from the bottom nipple on the petcock in a U shape and back up into the carb. My bike has a Baja light kit and is tagged for street in California. I'll probably sell it after I get it running.
@scottmorris2601Ай бұрын
I’m just posting here to help the algorithm.
@BncKennelsАй бұрын
Love the video. What parking brake cable did you use as I can not find one that works for my 60 Ranchero on Amazon.
@speedsharkgarage1787Ай бұрын
I looked through my Amazon and eBay account. I can’t find where I got the cable from. Maybe rockauto
@BncKennelsАй бұрын
@@speedsharkgarage1787 ok, thank you.
@RangnarProGamingАй бұрын
Great video and work on the bushings! At 5:30 ts made me pull my foot back also! 😂
@speedsharkgarage1787Ай бұрын
Thanks!! Yeah the one time I wasn’t wearing boots about took my toe off!
@YodagaveАй бұрын
Love the image of the duct tape wound cover on the man about to use a blowtorch
@speedsharkgarage1787Ай бұрын
Hahaha thanks. That one really hurt! Hand ended up swelling up that night
@narrowgaugegreg2 ай бұрын
soon.
@speedsharkgarage17872 ай бұрын
Trust me I am ready to work more on the 2002. Just wanting to get the rest of the cars at least street ready.
@narrowgaugegreg2 ай бұрын
@@speedsharkgarage1787 I dig the rx7 content. I've been watching a lot of atcc races from the early-mid 80's when the mazdas gave the v8's a run for their money.
@Johnny_OSG2 ай бұрын
It's such a shame you can't buy rubber bushings anywhere. Maybe someone knows from which other cars it is possible to fit
@Johnny_OSG2 ай бұрын
I will have to change mine soon but I don't want poly
@speedsharkgarage17872 ай бұрын
Yeah i looked but i didnt dig to deep as i needed to get the job done. But they seemed like very generic sizes. Definitely could find some from another car.
@Johnny_OSG2 ай бұрын
@@speedsharkgarage1787 There are suspension bushings that are half-bushings, half-ball joints, for BMWs or Vectras. I'm thinking if I could swap those instead of regular bushes to bypass the rear binding problem
@raymondharris91042 ай бұрын
Real projects with real issues. Love it. The time it takes is always longer than expected. Thanks for not cutting out the challenges.
@speedsharkgarage17872 ай бұрын
Thanks! I appreciate you saying that.
@SpeedSharkMotoDept-ml9lu2 ай бұрын
easy grease access!
@ridefastdieold54752 ай бұрын
honesty on youtube, what a concept
@narrowgaugegreg2 ай бұрын
it's not that you taped the boot that makes this great, it's that you did it, documented it and then shared it with the world. i'd only do the first part... and since you won't do it, i'll go work on a 2002 and will not document it, well maybe i'll make an Instagram post, but probably not.
@speedsharkgarage17872 ай бұрын
Haha thanks! I have been wanting to work on the 2002 but then I drive it and think, man I don’t want this off the road it’s to fun lol.
@tricountykustomz2 ай бұрын
I used the poly bushings in my rx7 build. Still havnt got it on the ground. Finishing up the front brakes right now which I'll have a video up on that. But I will say the poly bushings really stiffened the front end so far. Can't wait to get it back on the road.
@Yodagave2 ай бұрын
Keep at it! Great work and enjoy seeing the progress. And I appreciate that sometimes it makes sense to outsource a particular task or step to a specialist.
@same1eka2 ай бұрын
Match the paint and you’re done
@speedsharkgarage17872 ай бұрын
Might happen!
@zinoukhalil58102 ай бұрын
On 15:22 what name of this and 15:23 how I can buy it
@speedsharkgarage17872 ай бұрын
Rocker retainers I believe. You can get them from Ireland engineering
@tankiller96382 ай бұрын
So happy for you man, we all gonna get there, working out the details on a 09 Cobalt SS myself making 395
@speedsharkgarage17872 ай бұрын
Thanks! That’s awesome very underrated car!
@tankiller96382 ай бұрын
@@speedsharkgarage1787 honestly even I slept on them until I saw how cheap they are going for right now mines only 9.5K for a fully built car and everything checks its amazing everything else was easily 10K or more. Did consider a FC for awhile but then the pandemic hit now they are going for like 15-20 for decent examples now...oof
@landroverSV2 ай бұрын
Seriously 😅😊😂
@AceFlights2 ай бұрын
Awesome!
@zonoscopePictures3 ай бұрын
Where did you get those feeler gauges ??
@speedsharkgarage17873 ай бұрын
I have had them for long time. I believe blue point/snap-on. But I got them used so I don’t know where to find them new
@narrowgaugegreg3 ай бұрын
I found this video informative and full of useful information that nearly anyone can implement to improve their life, instantly. Also, we get a special treat when the contents of the upper "Workorder Residue" drawer is finally revealed. Quality You Tube entertainment.
@speedsharkgarage17873 ай бұрын
Hahahaha my favorite drawer
@rexfreelom43004 ай бұрын
Elvis Presley edition buggy with all terrain mud tires each 265mm width of tread and fiberglass is from 5051VW garage and vintage VW parts used parts storage in Pennsylvania. Too much work and so order from Western Wolfsburg for rear main seal and gasket kit for why kill the original where sand dune bug rode in California Arizona dunes is worth less than $5,000 dollars and original Kafer is worth almost $100,000.00 dollars worth of Beetle color replicas of Mother in Air Force that she drove her Army and white star on red bug on both side embalmed of the Army. Late Dad is retired second class Airman.
@rexfreelom43004 ай бұрын
The clutch line is snap off and it probably is broken cable and where to plasma cut the underside that in the bottom pan have the expose the cable and make clutch into disengage and engage able. Plus there is hole pipe for cable going thru under rear seat and I think it is for heat pull open heater and also for emergency brake strands/ wire go into the hole/tube as loose not tight on the movement of cable.
@rexfreelom43004 ай бұрын
You can have the engine but the title will be hard to come by unless you have a good lawyer that a giveaway the Beetle color red and all I'd perfectly in order as original and the engine looks old and it is not a swap engine. Qualified you to get a new pink slip because it is inside the service of my axe returned technician and get Brake job is the highest priority for 1961 Beetle 1500.
@rexfreelom43004 ай бұрын
Slot of oil leak from the engine. The transmission cannot leak compare to big leak. Only engine can do that leaking oil.This is not rebuild engine. There is research in the carburator and accelerator gas pump is very corrosion in most of the time but we'll check and see?
@rexfreelom43004 ай бұрын
Pull simple to have the valve cover comes right off. The color is black soot thinning gum to the cylinder head, is it?
@rexfreelom43004 ай бұрын
The electrons is weak differences of two posts force. The body metal of the Kafer is static but it will be grounded by touching the dirt outside with wire cable. Another way is use the magnet screwdriver and flick the point in distributor until it flick arc jump across. Then static is neutralized and not interfere with positive and negative charges.and
@rexfreelom43004 ай бұрын
Oil cooler have aged to the time of 1961 until 2023 ad tt hen the oil cooler seal hasn't leak yet. I think it is to see if the seal is soft like new. We don't know. Smelling gases and smoke from exhaust will tell that it is not rebuild. Cool flow of exhaust and very little hydrocarbon in tailpipe is great. Oil temperature gauge with copper tube from the sensor or ambient temperature sensor or laser thermometer will tell if the engine is not over heat.
@rexfreelom43004 ай бұрын
The older man dies is just a friend to a lady. The lady was named Herbie.
@rexfreelom43004 ай бұрын
Yes down in gullet. This one gully is gas line and another meaning for gullet is shock coil touching up there is the round gully.
@rexfreelom43004 ай бұрын
The wrench for oil strainer and bottom lid needs to have magnet install and oil is clean but check the oil and change oil for oil cooler needs 5W30 oil detergent. Wire brush get a loan of tools from a friend to check for trans axle and transmission look like it's leaking gear oil. The Channel heat flow in rocker panel will take some work on rebuild the press hard of the thick foil of steel gauge 27 - 28 atop the old pan buy the 6 foot x 8 foot sheet from professional garage building with where welder and California sent the USA steel of roll into wheel of tin sheet to Texas worker union at Volkswagen Camper with floor on wheels dealership of info by calling for a price of the new replacement.
@rexfreelom43004 ай бұрын
Drive it now but make sure the blinkers and head light works. Have Herbie belly fill with red tube and spray some oil Lubrican and tighten spark plug thread to the hole of the jug. number 53 racer had a collision and badly damaged front bumper and bonnet.
@rexfreelom43004 ай бұрын
The color red and pant in a 1961 Volkswagen 1500cc wagon bug that could it be compression of cylinders and rings go to very low PSI? yes, it usually does after wear it out and sound like very low volume of the 4 bangers. Why not add dual carburetors and EMPI Parts linkages.
@Yodagave4 ай бұрын
Great video. Have been wondering about trying LEDs. Might just be hard to tell from the video but it appears that on your garage door the new bulb pattern is a little higher. Will you have to adjust the headlights as a result?
@speedsharkgarage17874 ай бұрын
I have noticed with some cars that the LEDs make the pattern higher and I have had to adjust them down. To not be that guy at night.
@GentilsGarage4 ай бұрын
I am restoring a 1974 BMW 520 E12 with the M10 engine and Cylinder 1 is in terrible shape. cyl 3 has some pitting, but isnt too bad so that one, plus cylinders 2 and 4 just need some honing.
@Yodagave4 ай бұрын
Mike's left hand is now hella-smooth. Like Curley in Of Mice and Men LOL
@speedsharkgarage17874 ай бұрын
Haha!! I recommend disconnecting the sander before changing out the pad! Haha but yes smoothed it out nicely!
@secoff14 ай бұрын
It should be bent. Change the shift rod bushing and inspect the hanger first.
@speedsharkgarage17874 ай бұрын
Thanks. I looked it up that day and saw that it’s supposed to be like that. Definitely will replace the bushing
@thomaslindqvist17424 ай бұрын
that's right the shifter tube should be bent
@speedsharkgarage17874 ай бұрын
Thank you. I thought was supposed to bent but wasn’t sure
@narrowgaugegreg4 ай бұрын
the world needs more kids playing guitar.
@speedsharkgarage17874 ай бұрын
I agree
@jackmehoff29614 ай бұрын
One step closer. Looking good .
@speedsharkgarage17874 ай бұрын
Thank you!
@anomoly404 ай бұрын
Love the progress!
@speedsharkgarage17874 ай бұрын
Thank you!!
@JamesWilliams-qv6vc4 ай бұрын
Hello, I am looking to get an under glow kit for a 1972 Volkswagen super beetle and was wondering the Length on your under glow kit
@speedsharkgarage17874 ай бұрын
Oh man I just ordered a generic kit off Amazon. I can share the link to it
@JamesWilliams-qv6vc4 ай бұрын
@@speedsharkgarage1787 if you can, I’d appreciate it.
@speedsharkgarage17874 ай бұрын
a.co/d/art1HtD
@speedsharkgarage17874 ай бұрын
Here’s the link. Like said they are generic but it worked with the bug
@JamesWilliams-qv6vc4 ай бұрын
@@speedsharkgarage1787 thank you, appreciate it, love the content.
@jackmehoff29614 ай бұрын
Swap both those pans out while it`s split. Never have to worry about that again .
@speedsharkgarage17874 ай бұрын
Good call I got the sound padding stuff off and the drivers pan is in good shape
@jackmehoff29614 ай бұрын
I`ve had a 66, 70, 75, and a rail. I`ve been enjoying this series .
@speedsharkgarage17874 ай бұрын
Thanks. My first is the 71 super beetle we turned into a Baja. And now this one
@jackmehoff29614 ай бұрын
@@speedsharkgarage1787 Sweet. I`ll be watching your back videos .
@jackmehoff29614 ай бұрын
I Love old Bugs ! I subscribed, Love your channel .
@speedsharkgarage17874 ай бұрын
Thanks!!! I am starting to like them.
@narrowgaugegreg4 ай бұрын
are those just stock wheels painted black on the orange sqauretail? or something cooler that I need on mine?
@speedsharkgarage17874 ай бұрын
I will have to double check but I believe stock wheels or at least a e30 wheel