Valve stem is tight enough man

They are mainly geese aren't they

Excellent instructions, exactly what I needed. Thank you Boss! 👍

Thank you, I found this video useful.

There upside down, the dished out goes on the bar end.

Thank you

Man!!!! From the bottom of my heart I want to say thank you sir. We had an accident this past weekend on our Jeep Renegade 2020 and that gas shut-off message freaks me out. Just did what you say and "voilà"… the most beautiful sound of the motor running perfectly!!!

Just a heads up anybody who buys this. It's not gonna do what you think. It's gonna do except for drain your accounfortunately, I bought one. There's no difference in power whatsoever. You're better leaving it. I'm going with the Power Commander and have Having a dinosaur putting too many different power controllers is gonna cause problems and throw away money

I had to tow one today. Thanks for the help!

Thanks 🩷🩷🩷

Hi! I know it’s an old video, but I do have exactly the same bike as you had! Same pipes, same filter! Have you found any better tuner settings than 4% 1.2ms or that’s the best? I am installing the tuner in the weekend

I have aftermarket pipes on my shadow Aero they sound great under acceleration but at idle they to quiet picking up cobra exhaust for my bike today

reusing tubes u get a flat eventually because of the friction and damages

My cables all bundled together in a sleeve. 1999 1100 Shadow

Thanks for the video. Ordering my front tire this week.

Did you have to adjust anything else like chain?

Boy oh boy. That is slooooowwwwwwwwww

Where did u buy the tires from? Since have that brand how are the tires?

Beautiful bike. Great couple of videos. I love the white wall tires. I am ordering my tires today. Your bike went to the next level with them on there

Don't you have a tire machine at that shop

Worked on my 2018 Jeep Renegade after being rear ended on the highway!! (Posted on 08/09/2024)

The wheel removal would be pretty much the same on an 1100 right?

What length clutch cables ?

Thank you very much!!!!

I can´t turn off the warn lights =(

You never did the following video with the aftermarket k&N air filter I have the same tuner

Thanks dude. Big help. 👍 keep it up.

Put Cobra pipes On my VT 750 Areo now I'm told I have to put in a fuel mixture device oy my bike Will run lean and foul plugs! The device is $300 more. If anyone knows is this necessary? You'll notice how fast his bike's idling in this video. necessary

What about the fuel mixture device that you're supposed to install because it runs lean and fouls your plugs

I did the procedure but when i go to shut power button off the dang vehicle trys to start

Do you have a video or a website of the installation of the headlight and where you purchased at?

i love that this guy just films himself trying to figure stuff out. Much more realistic to what my experience is about to be.

Can i just use just linkages with stock shocks for a drop? or would I need adjustable/short struts as well?

Can this be done on the 2019 Jeep renegade

The Jeep Grand Cherokee became blocked after the accident. The inertia switch is open. Maybe someone knows how to solve this problem?

Ok thanks

Top🤟

Will this work on my 2014 overland.?

Well done my man, helped me a lot , keep posting 🙏

P r o m o S M 🙄

If you had to do this all over again...would you rather take the exaust off first?

Where did you order these from

Thanks so much! Saved my day!

Few tips for you since you're 'not a motorcycle mechanic': When doing mechanical service on any motorcycle, always use a rubber shoe on the lift claw to insure it does not damage the frame paint on the bottom as this will cause future rust for the biker, you used that floor jack with out a protective cover on the claw/cup and it most definitely damaged the black paint. When removing the rear wheel, there is a simple method that doesn't require you to drop the suspension, to clear the tire after removing the needed parts, e.g drive shaft spacer, drive shaft, brake drum connectors, simply remove the bolts from the rear portion of the exhaust, then loosen the bolts at the rear cylinder bucket's exhaust port where the exhaust pipe connects, then raise the exhaust pipe up enough to allow shaft clearance, this allows you to clear the shaft and pull it out and then remove the wheel easily. Also before lifting up wheel and sliding it away from the drift shaft (Give it gentle wiggles to work loose), make sure you use blue painters tape to mask part of housing that is closest to the trailing arm's drive shaft and/or tape on a piece of cardboard onto the trailing arm so when the wheel's splines brake free it won't hit the brake drum housing against the trailing arm and dent/damage the paint. I hope this advice helps you advance as anyone man (or woman) with 2 wheels loves that bike like it's their baby and don't want accidental damage done to it during service, this also will help you improve the speed of servicing the rear brakes or tire/tyre. Use this video for an example (please note I also informed the KZbin uploader to use cardboard to protect the brake drum housing.) kzbin.info/www/bejne/eGHHaXZ7pr-HrsU Good luck.

Thanks for your good video, it made me confident enough to change my own oil. 🙌🏽👍🏽🙏🏽🏍️🛵

That graphic designer has some skill, just not skill in the right areas…

Pauvre BMW elle a rien demandé

So was the hellcat part just for the algorithms?

Okay I found them my biggest question is how did you get to fit a 21

Hi what size tires are the white wall