I am so happy to see another Medalist! I have one that is my baby and currently working on. Yours looks great!
@Toyotas_n__Tools17 күн бұрын
Hey Chris do you have a front skid plate for a 89-95 4x4?
@princeali255527 күн бұрын
sexy feet 🦶🏼 brah
@matthewkirkham8234Ай бұрын
Did you have to grind the glass or window seal to make it fit right?
@martykirkpatrick63472 ай бұрын
Is it necessary to bleed front AND back brakes when changing front brake calipers?
@chriscollison31362 ай бұрын
I got rid of fuel line from the tank to The rail by the dampener and put -6an braided line with a cleanable filter on the frame rail cause the factory fuel filter is a pain im the Aaa. But with that and some bigger Imjectors I picked up a crazy amount of power. Oh and a 340lfm racing pump.
@chriscollison31362 ай бұрын
I got rid of fuel line from the tank to The rail by the dampener and put -6an braided line with a cleanable filter on the frame rail cause the factory fuel filter is a pain im the Aaa. But with that and some bigger Imjectors I picked up a crazy amount of power. Oh and a 340lfm racing pump.
@Matthew.Christensen3 ай бұрын
How has the seal worked out for you over the last 3 years? Any leaks? I'm about to start the same project, debating on getting the same gasket you used
@TRyan-op2jo3 ай бұрын
Great video. Thanks!
@user-oc2jl3cp2d4 ай бұрын
weird that the torque converter leaking trans fluid when aimed in the pour position
@DeaFBRED3 ай бұрын
Haha
@Srulio4 ай бұрын
Yeah, I bought the Subaru Crosstrek new and I never wanted the sunroof because I expected it to be a trouble magnet. And in a big rainfall episode yesterday it started to stream water from the headboard all over the electric window switches. I hope a can of pressurized air will be enough to fix this problem.
@gordong.51545 ай бұрын
badass
@coltwinchester61245 ай бұрын
Did you ever make any update videos on your camper?
@ernestogarcia80145 ай бұрын
Looking to 3.4 (5vzfe) swap my 2nd Gen
@Johnfor35 ай бұрын
I just bought one last weekend just like for 300
@shadrichardson66275 ай бұрын
"I did not do a very good job." 😂 Subscribed. Good stuff, brother.
@baziljames94956 ай бұрын
Hey have you ever had to change your mass air flow sensor. Which type or brand did your replace it with if you did
@billieswiney40476 ай бұрын
Did the valve cover gasket replacement no oil leak now but my car is sputtering now what did i do wrong please help
@cdcorrigan6 ай бұрын
Do you need to put any sealant on before putting in the windshield?
@jamesdotson64926 ай бұрын
The two I have done I have to lift up driver side motor a little very greasy LOL
@philsil13046 ай бұрын
My car lives under trees and I get this annually. I have an old bicycle brake cable in my toolroll and use this to clear out the channels at the front of the sun roof.
@cdcorrigan7 ай бұрын
No sealant required ?
@victorrosario41097 ай бұрын
He has all these other older toyotas. 🤘🏻
@fransbernardo28197 ай бұрын
Did you had a hard time getting the motor back in to the transmission I just can't get the last inch to set.
@yabeguns1ezu23 күн бұрын
This 4runner will never run again.
@lensmanicfeleven18477 ай бұрын
...is that a long crack across the driver side bottom?...
@AbsolutePaintingLLC8 ай бұрын
Is this the same on 97’ Subaru outback?
@seeharvester8 ай бұрын
But-ton, not butt-in.
@trentorr8 ай бұрын
my factory sunroof is different looking but same size
@trentorr8 ай бұрын
pnw yota owner! my current sr5 2wd short bed has a factory sunroof its a mojave
@martinphilips60918 ай бұрын
I've never had a diff apart. I couldn't really tell what you were doing.
@boondocksoverlandandoutdoors9 ай бұрын
Dude what a deal!!!! And yooo you slapped it on a 80s Yota?! Mad respect! What a sweet combo man! Happy for y’all! Looking to get into one but for my first Gen Tundra
@jacobmcling27649 ай бұрын
u quit making videos? really been enjoying them
@kennethbigham99209 ай бұрын
Stupid question but do u have to pull the support and drop the trany? 😢
@dirtstravaga76262 ай бұрын
I didn't, just a lot of swivels and extensions. I also unbolted my crossover and tied it up and out of the way. Probably not any easier though.
@0780marco9 ай бұрын
Im having issues getting mine to fit, what did you end up doing to get them in? Just find the right angle?
@soldierpaige25549 ай бұрын
Whats the highways speed like and rpms
@user-ks2sx9kk7o10 ай бұрын
Your battery is not fully charged
@chrishorst699310 ай бұрын
I don’t like the three legged lift system. Just put four.
@soldierpaige255410 ай бұрын
Can still keep up on the highway?
@estebanpina253311 ай бұрын
Yo Tengo una Toyota 86.4 cilindros.es.tandar
@robertrichmond183111 ай бұрын
You do not need to remove the dash to get that lower plate off. Unbolt it and drill out the 5 spot welds and it lifts write off. My truck is a 86 if that makes any difference.
@mauriciogonzalez933711 ай бұрын
Hi, what brand of gear and pinion are you used, I'm goind to buy for my truck but I don't know what choose, which one can you recommend
@DanielAlvarez-xl4qy11 ай бұрын
Damn great job helping people like me thats learning as i go i have a 1995 4runner n im trying to fix as much as i can on my own do you know if the tranny has to come off to replace the oil pan gasket??? Im trying not to do unnecessary work🙏🙏
@legacynorthwest124911 ай бұрын
Transmission does not have to come off. But make sure to thoroughly clean all oily residue until you can eat off of it. And use a small bead of silicone. I use ultra black, as a gasket or on both sides of the gasket. As well as in between the windage tray and the block. You will have to remove your front differential, as it sounds like you'll be doing this job with the motor still in the truck. Again, any oil gets in there and mixes with the silicone, you'll still have a leak. Good luck!
@DanielAlvarez-xl4qy11 ай бұрын
@@legacynorthwest1249 nice thanks! Yeah im leaving the engine intact im tryinhtg to figure this out before i mess with it it has two nuts right where the tranny meets n im trying to seenif there special socket or wrench tha will fit in that tight space my 4runner is a 2wd so from the tranny it’s connected to the drive shaft thanks nee sub to your channel!👍
@mauriciogonzalez933711 ай бұрын
What brand of gear can you recommend I don't know which one choose. I'am using 35s in my toyota 1980. I'am thinking buy 4.88
@JammyCrackcorn Жыл бұрын
You got a good air condition compressor for sale?? Mines a 1992 Toyota 3.0/ 4 WD
@KWAHU939 ай бұрын
I do
@victormanuellguz-man3783 Жыл бұрын
I do have the exact truck in yellow if anyone interested I’m located in the bay are mine runs
@deceased.boness Жыл бұрын
thanks man helped heaps !! saved me from the mechanic 😭
@bobleo873 Жыл бұрын
Anyone know how to find a canvas? Or order one when you don’t have one?
@coltwinchester6124 Жыл бұрын
The 3 jack system is stupid. I added a jack and moved the one in the middle to the back corner.
@TopNorthGarage Жыл бұрын
Definitely helped with my drift car!! I appreciate you 🤘🏼