You just saved me such a mess. I was going to rub black mica in and clean out the white spaces after. Did not think of using colored resin. Thank you.
@johnoileroutdoorsman1534Ай бұрын
Nice demonstration
@jowaller69Ай бұрын
@@johnoileroutdoorsman1534 thank you
@ellencarlino49932 ай бұрын
how much do you sell your dominoes set for???
@jowaller692 ай бұрын
@@ellencarlino4993 I haven’t sold any in a while. Were you wanting a particular style?
@djimajen3 ай бұрын
I just completed my first letter mold and was horrified to see that a magnet I had placed in there had a giant air bubble right in the front, which of course, wasn't visible from the back when I pressed it in. How do you ensure there are no bubbles underneath the objects you're placing into the mold?
@jowaller693 ай бұрын
Pour even slower around the objects and I did everything in layers . Pouring slow is the best though .
@djimajen3 ай бұрын
@@jowaller69 Thank you so much! I have to do the whole project again not only for the big bubble in front but also because one of my objects was carved out of wood and floated to the top of the mold and wouldn't stay down! LOL I'll be doing this version in layers to keep it in place this time.
@jowaller693 ай бұрын
@@djimajen what I would do for objects that float is pour a really thin layer just enough to get sticky quick put in your object just enough to stick not cover and wait maybe 20 30 minutes then cover it
@debbralehrman59574 ай бұрын
Sweet!👍🏼 Very nice idea.🌻🌻
@foodpornchef64844 ай бұрын
Ill be making these soon thanks
@JanTheNan5 ай бұрын
Wholemeal bread, thick cut
@JanTheNan5 ай бұрын
Sprinkle of salt, yum
@JanTheNan5 ай бұрын
Thanks, awaiting some
@everydaythings72685 ай бұрын
What mold did you use? Absolutely stunning!
@jowaller695 ай бұрын
I bought the mold from Amazon. I typed in tarot card resin molds
@everydaythings72685 ай бұрын
@@jowaller69 I did. Not sure what these exact molds were. Put an affiliate link for the tarot and the runes molds in your description. I would buy both. Love 💕 New subscriber.
@jowaller695 ай бұрын
@@everydaythings7268 Thank you that you would purchase through an affiliate link. I do not have one but I looked up my past purchase and have a link to the runes. They no longer have my specific tarot card mold but I was able to find some by typing in tarot card resin mold. www.amazon.com/dp/B08HRRTL7K?ref=ppx_pop_mob_ap_share
@everydaythings72685 ай бұрын
@@jowaller69 thank you for your time!
@makefunnies52905 ай бұрын
Girl, you gotta get Amazon links. Camera, eyeshadow, everything in this video. I don't usually leave a comment, but I was astounded by this. 💚 I would assume others are. 😊
@funquitasmith36846 ай бұрын
I just got this checkered mold.... There must be an easier way!!! Yours came out great! I will let you know how mine goes.
@jowaller696 ай бұрын
You will love it I’m sure
@stephaniemoore31497 ай бұрын
Sooo pretty!!!
@ChristinaSutherland-pp2sk7 ай бұрын
Just what i needed...thank yoz!❤
@shadowhenge7118 Жыл бұрын
Sad everyone only has tge fortitude for the major arcana.
@jowaller69 Жыл бұрын
Sadly this was the mold I could find. I personally own several tarot decks.
@zoomy.gg123 Жыл бұрын
What size are the letter molds
@jowaller69 Жыл бұрын
Hello they are 6 inches tall
@southernbelle8596 Жыл бұрын
A sewing rip seamer or one of those burr tool’s work wonders. No sanding and buffing needed
@jowaller69 Жыл бұрын
Thank you so much!!
@meme9921 Жыл бұрын
Thank you for video!! Do you coat pics so they don’t smudge? And is picture on reg paper. ?
@jowaller69 Жыл бұрын
I had the pictures printed out at Walgreens on regular photo paper. I did not coat them first I had several pictures made and tasted them using smaller coaster molds which I then gave to the dads.
@katiedid92982 Жыл бұрын
Just so ya know...pretty much everything in this video is wrong 😬 Adhesive shelf liner is a no-no. It's toxic under heat. Also, you act like 40gal terrariums are big. That is WAYYYY too small. The MINIMUM for a Beardie is a 120gallon. You need a flat basking surface (slate, rock etc.) I see that this video is 3 years old...I'm hoping you've learned a lot since you made this video and made the appropriate changes.
@pauladuker6644 Жыл бұрын
Super cute idea. The music was awful! Think about your audience not just what you like. To fix the bug mistake,you should have sanded it down until gone then put resin back in. Also I would have painted the edges of the letters except for the bottom to give it more definition! Thanks for sharing just please kill the annoying music! 😊
@beverlyalexander5966 Жыл бұрын
Forgot to ask where did u get the light up base ?
@beverlyalexander5966 Жыл бұрын
I'm so glad I found ur page . Just found out yesterday that my granddaughter is due with my first great grandbaby Feb.1st 2004. I wanted to make something extra special. And I plan to do this as a nightlight . We'll know next month the sex of the baby and get the name. Thank you.
@jowaller69 Жыл бұрын
I bought both the mold and base together on Amazon. I’m not an affiliate…yet or I would share the link.
@jowaller69 Жыл бұрын
Congratulations on your granddaughter 💕
@sherekaharris1943 Жыл бұрын
@@jowaller69plzzz do
@wellnessworks777 Жыл бұрын
😂😂😂😂
@Todesengel13 Жыл бұрын
Thank you I was looking for a fun and easy way to make my runes.🙂
@jowaller69 Жыл бұрын
I’m going to be making some witches stone soon. I’m looking for the perfect element for them.
@Todesengel13 Жыл бұрын
@@jowaller69 I would go with wind for me. I like the idea of positive energy blowing off of me on to the world, and it blowing back from others when I think of the wind element.
@jowaller69 Жыл бұрын
@@Todesengel13 fun fact because I’m allergic to resin I have to be outside when I pour and above me are wind chimes
@nhalasyn Жыл бұрын
River is such a mood! Love her 😂
@pamrauhuff2375 Жыл бұрын
Great personalities, yes pineapple belongs on pizza (in my opininion) but you do you.
@pamrauhuff2375 Жыл бұрын
Great project, I enjoyed warching.
@tammyarmstrong6397 Жыл бұрын
Hello, can you make this set for me please?
@jowaller69 Жыл бұрын
Yes if you would like I can do that. Send me an email and let’s talk. [email protected]
@charden2037 Жыл бұрын
So cute 🙂
@lesliespiers8407 Жыл бұрын
very cute.....did you seal the pictures before adding resin, so they dont get damaged???? Suggestion on the stand when done add a baby item (nick knack) on each corner..(rocking horse, teddy bear etc.)
@jowaller69 Жыл бұрын
No I didn’t. I made a tester using a coaster mold first. When I saw that the photos were fine I made the letter molds. The babies have just turned 1 , the photos are still good. I still suggest testing a copy of your photo first.
@jowaller69 Жыл бұрын
I love your suggestion
@elizabethnichols6334 Жыл бұрын
Sounds delicious we’ll try that tonight
@jowaller69 Жыл бұрын
It is reallly good you’ll enjoy it!
@latoyanatasha6477 Жыл бұрын
Does the pictures have to be laminated? Was some dried resin in mold before you placed picture?
@jowaller69 Жыл бұрын
Only if you want to do that. I didn’t laminate these and they did very well. But I had copies and tested it first. These are black and whites I would definitely test it if it’s a color pic. Take a copy and make a small test mold.
@Gamma-V2 жыл бұрын
Thank you for the instructions and comparison. Thinking of starting resin work, and appreciate your advice and instructions! Easy to understand!
@jowaller692 жыл бұрын
Thank you so much for your comment. I truly appreciate it.
@Faith-With-God2 жыл бұрын
Hi what size are your molds please tell me 🙏🙏
@jowaller692 жыл бұрын
They are 14 inches .
@Faith-With-God2 жыл бұрын
@@jowaller69 Thanks, love. your work is beautiful God bless you
@jowaller692 жыл бұрын
@@Faith-With-God thank you. You are so sweet
@rosabedung15892 жыл бұрын
Hola, cuánto mide el molde?
@jowaller692 жыл бұрын
They cost me about $12 each plus another $12 for the light
@trippintr1psy2 жыл бұрын
Always use non adhesive liner, adhesive kind releases gases which are toxic from heat and uvb light….
@jowaller692 жыл бұрын
Thank you for the advice
@trippintr1psy2 жыл бұрын
You’re welcome. I was googling dollar tree reptile supplies and came across this. Everything else, good ideas.
@lilianarestrepo76042 жыл бұрын
OMG I love the final result
@jowaller692 жыл бұрын
Thank you so much. I’m planning on making more. Another set of tarot cards along with a rune set and witches stones.
@lucyshort29812 жыл бұрын
So nice to meet u and find u!
@jowaller692 жыл бұрын
Thank you 😊
@FiRsTlOvEyOuRsElF14332 жыл бұрын
OMG! Love love love this! 🏳️🌈🏳️🌈 ❤🧡💛💚💙💜🤎🖤🤍 #rainbow #lgbtqia #proudlesbian #tlm
@jowaller692 жыл бұрын
Thank you so much. As soon as I stop being busy doing other things it’s my plan to make more LGBTQIA items.
@nursingwitjay32442 жыл бұрын
What the name of the cleR stuff to make it
@pretty_aarii3372 жыл бұрын
So the pictures are suppose to be turned the opposite way?
@jowaller692 жыл бұрын
Right. I put them in upside down and since I let the first layer dry I was able to put the pic in and turn it over to make sure it sat the way I wanted it to.
@jowaller692 жыл бұрын
Don’t have them facing up at you
@pretty_aarii3372 жыл бұрын
@@jowaller69 Thank you so much for that information 💕💕one more thing which side would be the front ?
@jowaller692 жыл бұрын
@@pretty_aarii337 the front is the bottom of the mold. I’m glad I can help!
@pretty_aarii3372 жыл бұрын
@@jowaller69 tried & epic failure 😂😂💔how many layers we suppose to put? & what’s the wait time before adding more ? I have a 7inch letter b mold
@pretty_aarii3372 жыл бұрын
What are you mixing with the resin? & where can I I purchase the light?
@jowaller692 жыл бұрын
I only mixed resin but I did add some baking candies in it from dollar tree. I bought the light from Amazon along with the molds
@pretty_aarii3372 жыл бұрын
@@jowaller69 what brand resin? Want to make for my baby shower. Can the resin be bought off Amazon as well?
@jowaller692 жыл бұрын
@@pretty_aarii337 I used Amazing that’s the name of it and yes it can be bought off of Amazon. I can’t wait to see what you make!!!
@pretty_aarii3372 жыл бұрын
@@jowaller69 Thank you so much. Is there anything else I need to purchase to make it?
@jowaller692 жыл бұрын
@@pretty_aarii337 all the little things inside I bought from dollar tree. I bought more than I used and just went with what felt good.
@Sonjanorris592 жыл бұрын
I'm new to Epoxy resin, did you do a layer before placing your pictures/stickers into the mold?
@jowaller692 жыл бұрын
Yes I did . It was just a thin layer and I waited about an hour before I started adding anything then I added another layer and waited 24 hours before adding more things and a final layer.
@Sonjanorris592 жыл бұрын
@@jowaller69 Thank you so much
@diandrawilliams2572 жыл бұрын
Did you laminate the sonogram or did you just print it and put it in there?
@jowaller692 жыл бұрын
I just had Walgreens print them out and I put it in the mold. Honestly if I had laminate I probably would have used it. The sonograms are still good but the laminate would insure they stay that way over time.
@ks-cf9mn2 жыл бұрын
Love it !!!
@jowaller692 жыл бұрын
Thank you so much!!
@alangdon052 жыл бұрын
Have you put color in the letter as a back ground with the light? If so how did that turn out?
@jowaller692 жыл бұрын
No I haven’t but I like that idea and will definitely try it!
@alangdon052 жыл бұрын
I'm thinking of doing it but not 100 percent sure yet since the lights will be colored instead of white
@jowaller692 жыл бұрын
@@alangdon05 I would love to see that!!
@alangdon052 жыл бұрын
@jowancka kzbin.infoqjgy7iH-8Gk?feature=share
@alangdon052 жыл бұрын
I added colored light and also colored background. It didn't turn out too bad but it pretty cool.
@breemarshee54232 жыл бұрын
How long do the big letters take to dry?
@jowaller692 жыл бұрын
I let mine dry for 48 hours total but I layered everything and waited 24 between layers
Those are adorable. You might want to get rid of your torch and use 99% alcohol to spray in your resin to remove bubbles. You will ruin a lot of moulds with a torch. Everything turned out well.
@jowaller692 жыл бұрын
You are right. Those molds are too expensive to keep ruining them.
@asiacook27822 жыл бұрын
Where can I get the items to make these
@jowaller692 жыл бұрын
I got my molds from Amazon. It’s called Happy Resin Molds. I’m not an affiliate so I don’t have a link for you. But if you type large letter molds it will take you there. The items I placed inside the molds I bought from Dollar Tree and Michael’s.
@nursingwitjay32442 жыл бұрын
what the name of the clear Stuff
@jowaller692 жыл бұрын
@@nursingwitjay3244 the resin I used is called Amazing
@marialevett13312 жыл бұрын
what all do u use
@jowaller692 жыл бұрын
I went to the Dollar Tree store and bought most of the stuff from the baby shower isle. Also I used things that I found in Michael’s store. I asked the moms to email me a copy of their babies sonogram and I had a few printed out.