marblekit FPV

Пікірлер

@mssippijim 7 күн бұрын

Should this also work with a Runcam Link module?

@marblekitfpv 7 күн бұрын

No, only for O3system.

@richdabarber 8 күн бұрын

I think im going to buy one

@eddie3045 13 күн бұрын

can i use this motors with meteor75 betafpv??

@marblekitfpv 13 күн бұрын

I wouldn't use it for that.

@pivot_fpv 27 күн бұрын

It does come with 2 pid tunes.

@marblekitfpv 22 күн бұрын

Yeah, they added that AFTER I made this video.

@D3lta1918 28 күн бұрын

I’m looking into the Pavo20 right now, do you think that it would work with a 750mah 3s battery even though it is recommended a 650mah battery?

@im_gldn Ай бұрын

Have anyone actually built this frame out. My frame is on the way

@TavoFourSeven Ай бұрын

How is it tho I think mine comes tomorrow

@marblekitfpv Ай бұрын

I talked about it in the review which is linked in the description.

@dario_3D Ай бұрын

Instead as far as the configuration on the radio is concerned, is it practically the same as how I would have binded a normal expresslrs receiver?

@marblekitfpv Ай бұрын

Binding is the same, but you have to select SBUS as the protocol instead of CRSF.

@TheCatFather01 Ай бұрын

Cool tip, thanks!

@pandrews01 Ай бұрын

Thank-you. Helpful for those who have purchased this radio and find themselves lost.

@MCsCreations Ай бұрын

Thanks for all the info, Albert! 😃 Stay safe there with your family! 🖖😊

@jaechoe Ай бұрын

Nice how they have both language FW on the memory card. A win!!! Thanks Albert!!!

@he214abc Ай бұрын

teardown

@ElChingonFPV Ай бұрын

Not too difficult.

@fluoxethine Ай бұрын

I wish it had HDMI in for Walksnail and HDZero VRXs.

@jlarson42 Ай бұрын

Oops, easy fix for people who have experience or watch your videos. I feel for the new pilots just getting into the hobby and see Chinese menus on their brand new radio. 😬

@hello81642 Ай бұрын

Since props are not screwed to the motor shaft but pushed in, don't they have higher tendency to come off in a pusher configuration?

@marblekitfpv Ай бұрын

No, it's the opposite. The thrust generated pushes the props into the motor so it's less likely to pop off compared to the regular puller setup.

@nektariosntikmpasanis1657 2 ай бұрын

are lq and rssidbm still available for osd?or we set up through telemetry a channel for rssi only so can see it in goggles osd?

@marblekitfpv 2 ай бұрын

No, since this is running SBUS protocol, the ELRS protocol features you mentioned do not work.

@mateuszpachulski6211 2 ай бұрын

Hey what is your opinion on recording quaility with post processing on both systems ?

@marblekitfpv 2 ай бұрын

Since Moonlight does not have the flat recording option or 10-bit recording, you have more flexibility with O3 over Moonlight.

@mateuszpachulski6211 2 ай бұрын

@@marblekitfpv so would you recommend it over moonlight ? I am considering switching to dji o3 having walksnail, I consider also buying moonlight or just a gopro naked but I am afraid of how not durable it is

@mateuszpachulski6211 2 ай бұрын

I endes up buying.gopro 9 naked.and stick to walksnail for now

@xavierprimeto1752 2 ай бұрын

Nice decorations if you have the O3 vtx. I guess people like the extra weight these days?

@marblekitfpv Ай бұрын

Some people just like more weight.

@JoshFPV24 2 ай бұрын

Too bad the parts are only for the O3 air unit

@marblekitfpv Ай бұрын

Yeah

@mrmoon_fpv 2 ай бұрын

nice video. I have this frame with the moonlight and I bought that extra kit and realized yeah I had no use for it. I haven't tried to fit it around the moonlight but when I realized I cant put the side plates without having that additional metal piece to screw the plastic part on it was a no go for me. Good stuff though. Wish I saw this before I bought it but it was cheap so not a huge deal. Thank you for your content!

@marblekitfpv Ай бұрын

Thanks for watching!

@runpuppyfpv5744 2 ай бұрын

If you could do blue tpu instead of the yellow that frame would match those motors perfectly imo ! Nice build ak .

@marblekitfpv Ай бұрын

I think they provide STLs on their support page

@TheCatFather01 2 ай бұрын

Sb makes awesome stuff, affordable😅

@marblekitfpv Ай бұрын

Yes, true

@MCsCreations 2 ай бұрын

Thanks for all the info, Albert! 😊 Stay safe there with your family! 🖖😊

@marblekitfpv Ай бұрын

Thank you! Will do!

@tazgrif11 2 ай бұрын

Cool frame

@jlarson42 2 ай бұрын

Nice looking frame with lopts of options. Very reasonable prices. The lite version is in the ballpark of the source one price wise. 👍😎

@jaechoe 2 ай бұрын

They sure do have a lot of versions, the O3 kits seems sort of cool ( metal heat sinks - to keep things cool ) Thanks for the update on the Mario!!!

@shadowofchaos8932 2 ай бұрын

Peanut butter and jelly props!

@StealthFlightFPV 2 ай бұрын

This was very helpful, thanks for putting this video together.

@Mya-2022 3 ай бұрын

Thank you for this video!! Super helpful!! You explain things the way I learn!!

@marblekitfpv 2 ай бұрын

Glad it was helpful!

@JordanLewisFamily 3 ай бұрын

maybe it's not common, but if you need to replace a motor is it game over? (ie, you need to do surgical micro soldering).

@marblekitfpv 3 ай бұрын

The soldering isn't that bad unless you've never soldered before.

@chickengeof 3 ай бұрын

I have that unit with avatar and seemed to fix the jello

@nugrostv4600 3 ай бұрын

Nice whoop ... greeting from indonesia

@awsom82 3 ай бұрын

Sad it’s above 150gr limit

@marblekitfpv 3 ай бұрын

This one is way under 150g... kzbin.info/www/bejne/r5_bqX6qeZdgj5Y

@awsom82 3 ай бұрын

@@marblekitfpv wow, cool, it’s what I need

@rookiefpv421 3 ай бұрын

i just started using aliexpress and happy with keep content coming 👍

@carterdavis5176 3 ай бұрын

This is by far one of the coolest drone builds I've seen. Id love to see more on this

@Crusader4633 4 ай бұрын

Did you ever get around to testing these?

@marblekitfpv 4 ай бұрын

I use them everyday now. Seems to work just fine. I don't fly long range so can't say if it's any better or worse for that.

@albertoyape2976 4 ай бұрын

Next is tutorials. ty ✌️

@user-oy6bi6gr8t 4 ай бұрын

Just wondering how you are recording the goggle view and if it is because of a certain type of goggles, what kind? Want to show everyone how cool it actually looks 🤔

@marblekitfpv 4 ай бұрын

You can see all the details in this video... kzbin.info/www/bejne/oZ3GXmaYZqqUgrM

@Blue-FPV 4 ай бұрын

Nice video! What are your camera settings for O3 and Moonlight? Frame rate, resolution,....

@marblekitfpv 4 ай бұрын

Stock, standard settings, auto shutter, 60fps, 4K for both.

@Blue-FPV 4 ай бұрын

@@marblekitfpvokay when you switch to 4k 30 or 25fps, the picture will be brighter, especially with the O3 but still darker than the Moonlight. I would say at daytime the O3 is better and at night the Moonlight. At dawn quite similar.

@ALEFA-ID 4 ай бұрын

Awesome mate. Are you using 5" quad in this video?

@marblekitfpv 4 ай бұрын

It's a cinewhoop that I showed in the main review here... kzbin.info/www/bejne/q6Gbl3yMnaecras

@divingfalconfpv4602 4 ай бұрын

This what i wanted to build except the betafpv pro frame with 35mm props. I prob could buy this just switch the frame 🤔

@marblekitfpv 4 ай бұрын

Should be possible but not sure how the 0702 motors will react to the larger 35mm prop.

@alberto2974 4 ай бұрын

Thanks. Great tutorial. I followed your instructions and Great!

@marblekitfpv 4 ай бұрын

Glad it helped!

@gabrielnunes159 4 ай бұрын

I bought brand new dji o3 air unit and worked for like 2 or 3 times. Then, after a little crash, appears this message of calibration error and when I tried to calibrate appear this error on assistant 2. Now I have black box and dont know what to do. Any idea? Tks a lot

@marblekitfpv 4 ай бұрын

Check that the cable isn't damaged and that the connections on both sides are fully secure.

@flyfpvfish4962 4 ай бұрын

Nice flight time 5 + is good I get that on my freestyle 2 analog camera looks better than that does..

@marblekitfpv 4 ай бұрын

analog looks better than hdzero?

@OdysseusVrakas 4 ай бұрын

I dont see a version with side panels like in some photos on the product page. Aka pro version

@Airbenderfpv 4 ай бұрын

How did you get out 4 minutes? I have a 550 mah battery and could get just 3

@marblekitfpv 4 ай бұрын

Naked O3 weighs a lot less so you get more flight time.

@runpuppyfpv5744 4 ай бұрын

Solid looking frame !

@JoshFPV24 4 ай бұрын

Frame looks really nice. The price is surprisingly good. Why would anyone spend $100 on a frame in 2024?

Ең жақсы KZbin

Пікірлер