Пікірлер
@jolemaire6629
@jolemaire6629 9 сағат бұрын
i wish it had a short dart drum mag and a horizontal front grip.
@Nerfapprentice
@Nerfapprentice 15 сағат бұрын
If the clip that holds the scar barrel isn't holding on to it as best as you want it to then I suggest switching it out for the Nexus Pro X clip for the scar barrel.
@jerryrush892
@jerryrush892 16 сағат бұрын
I’m sorry dude but you’re way off the mark on this one. It’s definitely as high quality as the Nexus Pro X. You can feel it when you pick it up. Not only that, it’s way more accurate. First 10 shots I took I hit all 10 cans I was shooting at from 50ft away. I’m seriously puzzled by most of your comments here. Did you try using the Dart Zone BCAR on it? You have problems with the design yet if you hold it side by side with the Nexus Pro the differences are small but actually improve the design. Better barrel placement and it’s longer…
@foamquest
@foamquest 16 сағат бұрын
@jerryrush892 I totally appreciate your opinion and perspective! However, for now, I stand with the opinions discussed in the video. For me, accuracy seems to be about identical when compared to my NPX. With BCAR, SCAR, and without anything up front. It's PHENOMENAL out of the box accuracy, but no better than the NPX. I really do feel like the plastic is thinner in some places. (Though I don't have any exact measurements beyond "feel") You didn't experience the loose SCAR holder or sights? There could very well be some modal discrepancy. I do appreciate the design. And I do think the blaster is great! It's just that it doesn't click with me like the NPX did, and I happen to feel that it has some shortcomings. I would love to hear more of your thoughts! If you'd like to continue :)
@kurtiskeys483
@kurtiskeys483 20 сағат бұрын
Im skipping this like i am the venom. I think nerf might have better offerings this time around. I prefer the torrent over this one. Plus with a metal barrel and a spring upgrade im sure you can get the torrent to this ones levels. Im in no way a nerf lover. I haven't bought a nerf product in years but with the venom which to me is a cut down omina done right and this being a rush job from what all the creators are saying nerf might have it this round. Now when that xshot comes back in stock on Amazon it will blow all of them out of the water.
@grantponciano9386
@grantponciano9386 21 сағат бұрын
Im curious if firing from the cylinder or the magazine makes any difference in fps or accuracy?
@foamquest
@foamquest 15 сағат бұрын
Not that I've noticed. Once the dart is in place, there shouldn't be a difference. I guess I should test to make sure! :)
@grantponciano9386
@grantponciano9386 15 сағат бұрын
@@foamquest thanks for replying! I'm a huge fan of your content! :)
@foamquest
@foamquest 14 сағат бұрын
@@grantponciano9386 ;)
@taylorharris6637
@taylorharris6637 21 сағат бұрын
I think it's an *okay* blaster. The performance price and included accessories are great. However visually speaking it's a very ugly blaster and the SciFi theme does not work for dart zone. Plus I feel that the drum was an unnecessary inclusion that made it difficult for them to sell at $49.99 and makes the blaster fall flat in certain areas like plastic quality as a result.
@CallofDutyMobile_pro
@CallofDutyMobile_pro 22 сағат бұрын
I wish I’d could buy it (I have some cool paint Idea’s)
@dankcircle1878
@dankcircle1878 22 сағат бұрын
Drum rotates fine, you just need to push it until it gets a soft click
@spideravengermiller3920
@spideravengermiller3920 Күн бұрын
Great review man this blaster was definitely a surprise
@foamquest
@foamquest 22 сағат бұрын
@spideravengermiller3920 Thanks! Absolutely! This blaster was definitely a surprise!
@WannabeNerfOperator
@WannabeNerfOperator Күн бұрын
Honestly, I’m personally not super interested in this blaster. But I do appreciate that it isn’t just the Nexus X but green, it does few unique things like the drum to mag compatibility! But overall I think I’d rather have the Nexus X. Great video 👍
@foamquest
@foamquest 22 сағат бұрын
@WannabeNerfOperator Totally, I also prefer the Nexus Pro X, but I am definitely glad that this wasn't just a repaint!
@QuietWyatt2005
@QuietWyatt2005 Күн бұрын
Link is available now lol
@foamquest
@foamquest 22 сағат бұрын
@@QuietWyatt2005 It's updated now!
@vegative7493
@vegative7493 Күн бұрын
Hi! How long you wait from purchase to delivery saber
@foamquest
@foamquest 22 сағат бұрын
I think it depends, I wouldn't think anymore than 2 weeks
@nicholasmazzarella2720
@nicholasmazzarella2720 Күн бұрын
FQ Great review as always. Thanks for all the info. We will probably pick one up but also stick with my Nexus Pro X for game play.
@CRNerf
@CRNerf Күн бұрын
This does not fill a new role for me so it will probably be a pass. I have a tomcat and a NPX so this feels unnecessary for me. Thank you for the video and your thoughts.
@foamquest
@foamquest 22 сағат бұрын
@@CRNerf Valid points!
@EricSlater-pj7rc
@EricSlater-pj7rc Күн бұрын
The Stryker 2.0 good blaster
@foamquest
@foamquest 22 сағат бұрын
@@EricSlater-pj7rc It is a very compelling blaster
@brickosaurus2276
@brickosaurus2276 Күн бұрын
Great review! I haven't gotten one in hand yet. However there seems to be something off with it, almost like it's a prototype? It's kinda odd to me. However still a cool option, and I may get it to review
@foamquest
@foamquest 22 сағат бұрын
@@brickosaurus2276 I do think the blaster is great overall, but some elements definitely screem unfinished....I also wish it wasn't an open face box, I think that makes the Pro line feel a little less special
@ToxicAtom
@ToxicAtom Күн бұрын
Solvent welded is an instant no-buy from me. If I can't get in, even if just to service or repair the blaster, I have no interest.
@foamquest
@foamquest 22 сағат бұрын
@ToxicAtom I hope I didn't cause confusion. The blaster isn't solvent welded, just the optics!
@ToxicAtom
@ToxicAtom 22 сағат бұрын
@@foamquest Oh, yeah that changes things a lot for me. Optics are whatever, as long as I can get in the blaster itself, then I'm a lot more accepting of this thing's flaws. Thanks for clarifying!
@nerftalk1163
@nerftalk1163 Күн бұрын
It seems more like a Tomcat, than a Stryker. The prime seems a little easier though. So are the drums cross compatible?
@foamquest
@foamquest 22 сағат бұрын
@nerftalk1163 I'm not sure if it's compatible, I didn't check the compatibility, I'll let you know once I've tried
@nerftalk1163
@nerftalk1163 22 сағат бұрын
@@foamquest Thanks, you’re the first review I watched on it,, so I was just wondering. Be really cool if they were!
@michaciemniewski9791
@michaciemniewski9791 Күн бұрын
Previous muzzle attachment (1.0) was for... Mega darts. Many this one also works with those darts? Could anyone check?
@foamquest
@foamquest 22 сағат бұрын
@@michaciemniewski9791 It's an odd size, I'll have to test it.
@michaciemniewski9791
@michaciemniewski9791 10 сағат бұрын
@@foamquest i know previous one was launching mega darts...
@foamquest
@foamquest 4 сағат бұрын
@michaciemniewski9791 Ok, so it doesn't have a great fit with anything. Too big for Elite, N1, darts, but too small for Mega or Rival. The only thing I could fire somewhat effectively was a Mega XL dart. Stuffing it awkwardly down the muzzle. But, the included SCAR is actually much better at firing these
@michaciemniewski9791
@michaciemniewski9791 3 сағат бұрын
@@foamquest interesting. It looks bigger that the previous one for sure.
@mr.wublin
@mr.wublin Күн бұрын
I think it’s awesome that they decided to go with something unique for this blaster rather than being a copy of the Nexus X, and being able to switch between feeding mechanisms out of the box is really cool! Tolerance issues are a little annoying, and I’ll be sticking with the Nexus X for now
@michaciemniewski9791
@michaciemniewski9791 Күн бұрын
Do they matter? Who would keep their PCAR in a Holder instead of a barrel anyway?
@foamquest
@foamquest 22 сағат бұрын
@michaciemniewski9791 Good point, but I think it's just the idea that it doesn't work well (if) someone wants to use it
@michaciemniewski9791
@michaciemniewski9791 7 сағат бұрын
@@foamquestmaby for storage? I will not use it anyway. Has no practical usage.
@roseminijrcias8875
@roseminijrcias8875 Күн бұрын
The king uploaded🗣️🗣️🗣️🔥🔥🔥🔥
@foamquest
@foamquest Күн бұрын
I appreciate the enthusiasm! 😅
@foamquest
@foamquest Күн бұрын
A couple things: first, when I filmed this video it was so hot that my Ember, Bamboo 2.0, and new Nitroshot Bamboos were melting. The glue to fix the head on that is. Anyway, because I tested in extreme conditions, take my numbers with a grain of salt. Some high numbers could have been caused by dart heads flying off. Secondly, thanks to @jackboulter4901 I now know that this blaster is not cross compatible with full-length Nexus Pro X springs.
@jackboulter4901
@jackboulter4901 Күн бұрын
@@foamquest Thanks for including me in the pinned comment ☺️
@c146w
@c146w Күн бұрын
@Foam Quest Heads up for the title, it's "dual" when meaning two, "duel" is like a fight where one guy slaps the other with a lace glove before they try to shoot each other with flintlock pistols.
@foamquest
@foamquest Күн бұрын
OMG, thanks! I didn't even notice!
@jemeljordan-butler4510
@jemeljordan-butler4510 21 сағат бұрын
Getting Charlie Murphy flashbacks..
@foamquest
@foamquest 20 сағат бұрын
@@jemeljordan-butler4510 I get that reference! 😅
@jackboulter4901
@jackboulter4901 Күн бұрын
So just quickly, The nexus pro X springs aren't compatible with the stryker 2.0 as it's stock spring is shorter in length and wider diameter, you can't swap the end caps over either to use the nexus pro x springs in this. Hope you don't mind me saying 😊, Also the new nitro shot+ bamboo darts are 1 gram.
@foamquest
@foamquest Күн бұрын
I really appreciate this info! I just included it in the pinned comment! Thanks!
@jackboulter4901
@jackboulter4901 Күн бұрын
@@foamquest No problem 😊
@niksitera6504
@niksitera6504 Күн бұрын
I honestly like drums more than magazines so the stryker 2.0 is prob the best for me.(also my ragefire is just about to arrive).
@foamquest
@foamquest Күн бұрын
I haven't tried the Rage Fire, but it looks cool!
@user-bf5yu6ru5s
@user-bf5yu6ru5s 2 күн бұрын
I have echo and a phoenix which I bought it today I have 2 guns now
@CRNerf
@CRNerf 2 күн бұрын
Yeah, I am focusing more on Dart zone half length options right now and looking forward to the blasters that Xfoxgames is releasing soon. I do appreciate the info here and your thoughts and opinions. Take care.
@ushankaboy7357
@ushankaboy7357 Күн бұрын
If dart zone is so great, why had not i have seen it outside of USofA?
@elpeorcanaldeyoutube9438
@elpeorcanaldeyoutube9438 2 күн бұрын
Que vas a hacer con tantas nerf que tienes?
@stevensun342
@stevensun342 2 күн бұрын
Yo bro’s got some tricks
@OutOfIdeas9977
@OutOfIdeas9977 2 күн бұрын
I’m a little disappointed that they don’t have the gear up color scheme despite it having the name “Gear Up”.
@foamquest
@foamquest 2 күн бұрын
@@OutOfIdeas9977 That would've been SOOO cool!
@ToxicAtom
@ToxicAtom 3 күн бұрын
this actually isn't the fist instance of a stock designed to attach upside-down, there's a lever action Zombie Strike blaster with the same gimmick. Very neat stuff.
@CuberBeats
@CuberBeats 3 күн бұрын
It's called the Scravenger. Basically a successor to the Slingfire. I absolutely love how it looks, but it is kind of an acquired taste.
@foamquest
@foamquest 3 күн бұрын
You're right! I forgot about that one! I love the slamfire feature!
@nicholasmazzarella2720
@nicholasmazzarella2720 3 күн бұрын
FQ Awesome review. These we will pick up for the collection. Probably take them out and give them a try but most likely they will just end up on the wall with the other blasters we don't use often. Thanks for the awesome review. Keep up the great work.
@ericslater-vk6wb
@ericslater-vk6wb 3 күн бұрын
n series gear up pack ok for me
@DOUBLEPUNCHPRONERFER
@DOUBLEPUNCHPRONERFER 3 күн бұрын
I'm getitng bored with NSeries so my last 2 NSeries blasters to review will be the Sprinter and The StrikeBack At least for now
@foamquest
@foamquest 3 күн бұрын
The Sprinter is ever elusive
@trinatyfofana7515
@trinatyfofana7515 3 күн бұрын
Can you make a video on how to fix it if it doesn’t roatted
@spideravengermiller3920
@spideravengermiller3920 3 күн бұрын
Great review man this is definitely a unique set
@foamquest
@foamquest 3 күн бұрын
For sure, it definitely could have been better, but it might be a great fit for some!
@foamquest
@foamquest 3 күн бұрын
I think this will be the last of the N-Series reviews for a bit. We'll be diving into some more highly anticipated entries next! Stay tuned! :)
@guscarraro3361
@guscarraro3361 3 күн бұрын
Hi
@foamquest
@foamquest 3 күн бұрын
Hello!! ;)
@xeno4415
@xeno4415 6 күн бұрын
I do the same thing testing my modded blasters lol
@JediJunkie247
@JediJunkie247 7 күн бұрын
Of all the special ignition effects, I love what you referred to as the Godzille-effect.
@Zetson2952
@Zetson2952 7 күн бұрын
For 31 bucks? Is it good?
@sonicx254shere3
@sonicx254shere3 8 күн бұрын
im so excited for npx vs stryker 2.0 vs maulr!!
@sonicx254shere3
@sonicx254shere3 8 күн бұрын
yo wdym by the international release of the npx?
@foamquest
@foamquest 8 күн бұрын
@@sonicx254shere3 I'm referring to the model sold outside of the United States. The one that is branded as Dart Zone Max, and not Adventure Force.
@sonicx254shere3
@sonicx254shere3 8 күн бұрын
@@foamquest tysm for the quick reply! i had no idea they were releasing the npx outside of the us! fantastic news ✨
@cheesevlogz
@cheesevlogz 8 күн бұрын
pls someone are these as strong as srb 400s?
@foamquest
@foamquest 8 күн бұрын
@cheesevlogz Yes, this blaster matches the power of the SRB-400
@OrangeGorilla516
@OrangeGorilla516 9 күн бұрын
Super helpful, thanks!
@aristotlebenjamingamiao0331
@aristotlebenjamingamiao0331 10 күн бұрын
2024 maverick!
@mashavia247
@mashavia247 10 күн бұрын
If water gets in the drum will that trigger it to stop working
@HugoPlayer-mn1qu
@HugoPlayer-mn1qu 10 күн бұрын
Is it a blaster that is god in Performance or more for fun?
@dir463
@dir463 11 күн бұрын
how much does it cost
@billy_vr
@billy_vr 11 күн бұрын
I had a WEN rotary tool (dremal) with a broken Flex Shaft so I twisted one of the long springs on the outside of the flex shaft off and combined it with the original spring on my nexus pro X and added a pvc pipe cut to about 1 or 2 inches and sanded down to fit inside the buffer tube and also work as a spacer, I also used the same dremal to sand down that pvc pipe so now it is so so hard to prime that I almost need two hands to prime it it’s about as hard as priming a “Bug-A-Salt 3.0” with one hand and it also worries me about whether or not it is going to have a rapid unscheduled disassembly (explode) while priming it 😂😂