Hi, I know this is an old video and i probably won't get a reply but i figured i'd try anyway.. I'm having a no crank no start after trying to hook-up an aftermarket radio. (i don't know if the radio is related or not) All the dash lights light up but when i turn the key all i get is a small click from the steering wheel area (like a relay type click) but nothing from the starter. I replaced the battery with a brand new one, so i know it's not that. I was thinking it would have been a starter issue but i'm getting zero sound from the starter, and i keep finding vids and threads about the immobilizer that sound very slimier to my issue. Will this trick work on my 2005 mini cooper s r53 to tell me if my starter is at fault? And if i do this, and it does work, will the car actually run and drive, or will it just crank the starter? i really don't want to just throw a starter at it and find out it still won't start after doing all that work >.< And taking it to a dealer is really not an option for me ($), so at this point i'm kinda praying it's just a bad starter. Do you think trying this trick is my best option? Any help is appreciated!
@caralarmandradio9 күн бұрын
Hi yes this will work for your car try it and see if it is the starter. If you need the full testing procedure email me at [email protected]
@jaystheone112 күн бұрын
Is there no cheaper way? Upgraded to the mk 2.5 cluster on my mk2 Focus and did not know you cant lower the mileage just increase it with Forscan.
@caralarmandradio12 күн бұрын
Send it to me and i will change it for you£45 plus postage
@caralarmandradio12 күн бұрын
Email us at [email protected] to arrange it to be whatever mileage you want ok
@وليدخالد-ب4د7لКүн бұрын
please help me @@caralarmandradio
@milosblagojevic119613 күн бұрын
You need working key or put in service mode
@caralarmandradio13 күн бұрын
I will check that out i have programmed a key for it just waiting on a reader coil
@caralarmandradio10 күн бұрын
Its not that i just tried it on a lowline cluster and it worked a treat so i would say it is because its an immo 4c
@10malabdullah1014 күн бұрын
Great
@caralarmandradio5 күн бұрын
You’re welcome
@DerviceDongmo14 күн бұрын
please how to proceed when it is automatic at start button?
@caralarmandradio14 күн бұрын
Try foot on brake hold and turn on ignition
@bharatbisht849816 күн бұрын
I'm so thankful for this very helpful video. It honestly helped me and saved $. I replaced the battery and it had sufficient power but won't start and I followed the same steps as said it worked 🎉 amazing. My 2017 Honda was exactly had the same issue as mentioned and been resolved without even getting my car to a mechanic. Thanks Bud..👌
@caralarmandradio16 күн бұрын
Glad it helped 👍
@autodiagnosis477317 күн бұрын
Hi , can I get any software to adpat immo of vag group while cloning ecu ?
@caralarmandradio17 күн бұрын
Not sure what you mean as a properly cloned ecu will not need adaptation
@autodiagnosis477317 күн бұрын
@@caralarmandradio when you're cloning EDC17c46 from KTM bench you need to adapt the file , for other ECU no need adaptation
@caralarmandradio17 күн бұрын
Yes you are right foxflash does it for you with a cloning tool built in
@autodiagnosis477315 күн бұрын
@@caralarmandradio can I get this software ?
@caralarmandradio15 күн бұрын
Yes just order it from anywhere i got mine on ebay
@animatevideo746119 күн бұрын
Ten 🍺🍻🍺 for you. Thanks🍾
@caralarmandradio5 күн бұрын
Thanks
@johnnysoffe24 күн бұрын
where can i get an evo2 key programmer
@caralarmandradio24 күн бұрын
Hi no longer available but you can buy the truecode system which is much better value for money at £400 for lots of cars and vans halkyardtech.com/?srsltid=AfmBOoqX05SJZjqILdfZl1rFSzWUPsxaWiU8GruNxlLknpd9KIFCgfpB
@azharkhan-q1w24 күн бұрын
I have exactly same with my 2020 corsa 1.2 turbo 40k . Engine oil pressure too low and goes into limp mode.. My local garage have done a flush to try and clear the blockage but no luck abd said oil pick up pipe is probably blocked due to the wet belt breaking down Any body know how much it will cost to rectify...
@caralarmandradio5 күн бұрын
Thanks for sharing
@dannybryant68735 күн бұрын
@@azharkhan-q1w . $500 to $2500? I would guess 2000 on the Chevy Trax.
@harrybilla124 күн бұрын
Respect, 🫡 saved my dollars sir.
@caralarmandradio5 күн бұрын
No problem
@jasonhorseman304127 күн бұрын
hi, I have a berlingo 08 plate my heater also only works on num 4, is this exactly the same as this berlingo
@caralarmandradio27 күн бұрын
Yes more than likely
@jasonhorseman304127 күн бұрын
@@caralarmandradio mine is the mk2 shape
@caralarmandradio27 күн бұрын
You’re best bet is to get it all tested before you buy any parts
@jasonhorseman304126 күн бұрын
@caralarmandradio hi again, I've just had a look at my car and I've found the heater resistor which goes into the fan housing but I can't seem to find the relay component that you show, also for the fan to work the engine got to be on it don't work with just the ignition on is that correct
@caralarmandradio26 күн бұрын
@jasonhorseman3041 yes that’s correct you probably just need a heater resistor
@Someone-p2x27 күн бұрын
How much do you charge to do this service ?
@caralarmandradio27 күн бұрын
This month only £85 including postage uk addresses only
@10malabdullah1028 күн бұрын
Great thanks.
@caralarmandradio5 күн бұрын
You're welcome!
@MySkyrangerАй бұрын
Just keep the second key for the lock. No problem
@caralarmandradio29 күн бұрын
And what if you don’t have any keys ?
@catonphilАй бұрын
The cheap junk says it will read VDO dash. Yours is a VDD dash!!!!!!
@caralarmandradioАй бұрын
The cluster says vdo and vdd 🤔
@catonphilАй бұрын
@@caralarmandradio your video shows vag tacho saying its KOMBIINSTRUMENT VDD!
@catonphilАй бұрын
@@caralarmandradio have you tried to press "Connect Any Tacho" and see what that brings up???
@caralarmandradioАй бұрын
I will try that and let you know
@nusratshaheen4913Ай бұрын
Hi , I have a vw polo 1.2 2013 , all of a sudden the immobiliser is no longer going off even with the original key. I get no key messsage appear on dash board. Can you help remove the immobiliser ?
@caralarmandradioАй бұрын
Hi yes i will need the ecu and can remove it electronically what reg is it please email it to [email protected]
@nusratshaheen4913Ай бұрын
@@caralarmandradio Thanks
@dannybryant6873Ай бұрын
It is neat that you can inspect the belt. Not neat that it wasn't a chain.
@caralarmandradio5 күн бұрын
I agree
@stephanadelwolmarans7533Ай бұрын
What is PATS 23? I AM STRUGLING FOR ABOUT 9 MONTHS NOW, JUST TO GET THE CAR STARTED. What must I do? It is on a Mark 5, 2006 Ford fiesta 1.6 tdci.
@caralarmandradioАй бұрын
It needs a pats alignment
@stephanadelwolmarans7533Ай бұрын
Thanks, how is the alignment done?
@caralarmandradioАй бұрын
@stephanadelwolmarans7533 forscan should do it
@stephanadelwolmarans7533Ай бұрын
@@caralarmandradio Thanks a lot. I've joined your channel also. So much informative videos. Thanks for it.
@caralarmandradioАй бұрын
@stephanadelwolmarans7533 thank you next time i will do a video of pats alignment
@djraphaellourenco8321Ай бұрын
Still available
@caralarmandradioАй бұрын
Special order at £499
@dicksienormasАй бұрын
Hi, will this software do Ford transit mk7??
@istvanhuni7794Ай бұрын
May I ask what the problem was with him?
@caralarmandradioАй бұрын
Bad soldering
@istvanhuni7794Ай бұрын
Thanks
@BotsisAnargyrosАй бұрын
Pls clarify. Disconnect positive and negative cake from battery and then touching possitive and negative cables together on the car? There is a Mopar module balancer etc on the negative pole. What did you do with that?
@caralarmandradioАй бұрын
Yes disconnect the live and the earth hold them together for a couple of minutes the connect the live first then the earth ok
@michaelstenli7123Ай бұрын
What is this exactly called I would like the ability to do this for what I do interior swap. I type in Ford OBD and it only brings up forscan.
@caralarmandradioАй бұрын
Hi its called ford obd and very hard to get hold of now i can make you up a lead and software for £250 email me at [email protected] to purchase
@pokeman72Ай бұрын
i went to docotor with my austic son and he was playing with my key, when i came back out, my range rover 2008 tdv8 would unlock doors, but not start it, i had diagnostic plugged in and no faults came up, could this be the key n immobiliser ?
@caralarmandradioАй бұрын
Unless the key fell apart and the chip fell out i don’t think so as a scan would say immobiliser active
@pokeman72Ай бұрын
all its says on scan is b1b01 key transponder ? any ideas ? many thanks
@caralarmandradioАй бұрын
@pokeman72 that sounds like the key has issues use your spare
@pokeman72Ай бұрын
@@caralarmandradio i dont have another key, thats the problem , would an automotive locksmith be able to sort it ? many thanks.
@caralarmandradioАй бұрын
Yes
@БлогКолхозникаАй бұрын
Same problem
@caralarmandradioАй бұрын
Find out what circuit it is on then go to the relay
@glenlee1610Ай бұрын
Tried disconnecting the siren but now car won’t even start. I assume it’s something to do with the immobiliser beeing tied into the siren?
@caralarmandradioАй бұрын
No the immobiliser has nothing to do with the siren did you cut the through all the wires in one go if so you may have blown a fuse
@bernieraoАй бұрын
Good tip. What was your thought process to get to the main relay? Thanks in advance!
@caralarmandradioАй бұрын
Hi using wiring diagrams and testing
@jackroadnight1348Ай бұрын
Hi, thanks for the video. I have a 2014 T5 with ABS light fault coming on and off causing van to brake. Is the first step to pull wheels off and inspect for damage cables or is there a more efficient starting point? Cheers
@caralarmandradioАй бұрын
First job is to scan the system so you have an idea where to look ok
@coolbemaАй бұрын
Hallo, still available or sold??
@caralarmandradioАй бұрын
Yes £299
@DonovanSmith-k6sАй бұрын
I’m from the USA, and my dumbass watched this video and tore apart the blower motor 😂😭
@caralarmandradioАй бұрын
Oops 😬
@nutterhmАй бұрын
Thanks for your Video.
@caralarmandradio5 күн бұрын
You are welcome
@davisheijndijk3566Ай бұрын
Nice VID!! do u have the details of the breakout cable u use for bench use?
@caralarmandradioАй бұрын
Hi yes i can make you one
@Highran56Ай бұрын
I plugged in my new cluster but the car doesn’t start. Does the new cluster need programmed to the car?
@caralarmandradioАй бұрын
It will need to be aligned with the rest of the modules thats all
@Highran56Ай бұрын
@@caralarmandradio how do I do that? Do I need specialist tools?
@caralarmandradioАй бұрын
Depends on its year forscan should do it but if its newer than 2012 it my need the ford tool. We may be able to clone it but again it depends on the cluster as some cannot be cloned just mileage adjusted
@ajgb97Ай бұрын
Hi, I got my key cloned, and the new key turns the car on but the central locking doesn't work, is there anyway i can sync the central locking to the new key?
@caralarmandradioАй бұрын
What car is it ?
@nutterhmАй бұрын
did you have to program the key back in ? or was it plug and Play ?
@caralarmandradioАй бұрын
Hi it was plug and play
@caralarmandradioАй бұрын
I am going to do a video of one that isn’t plug and play that has to be programmed with the dealer tool
@nutterhmАй бұрын
Hi, i have done few like this but it was not plug and play and the vehicle did not start is there a way of knowing which one is plug and play ?
@caralarmandradioАй бұрын
@nutterhm yes if you reset the bsi then write the eeprom into it then disconnect then read it again if it has stored the vin and password then its cloned correctly if the vin is blank and the password not found then it has the be programmed by dealer tool on the bench or in the car vin pincode and key ok
@jamiebennett975Ай бұрын
Hi transit mk6 2002 any clue to wat my problem is its got code b2139 its cranks over but does not start any help would be appreciated thanks
@caralarmandradioАй бұрын
Reg number please
@jamiebennett975Ай бұрын
@@caralarmandradio Hi AU02HFZ. THANKS
@caralarmandradioАй бұрын
Needs a pats alignment
@conradevans3238Ай бұрын
Where can i buy the codes from?
@caralarmandradioАй бұрын
They are free
@Highran56Ай бұрын
does it matter if you put a cluster that came from a diesel into a petrol vehicle and vice versa?
@caralarmandradioАй бұрын
Yes the rev counter will be wrong and it will clock up more miles on the speedo due to the miss calibration
@Highran56Ай бұрын
@@caralarmandradio So if I have a 1.2 petrol I would need to put in a speedo from another 1.2 petrol for it to work properly?
@caralarmandradioАй бұрын
Yes
@imamuddin6118Ай бұрын
Can u send me address
@Musaib_Reyaz2 ай бұрын
VCOAKR12103466 please sir code
@silversurfer61732 ай бұрын
would this also program a rover mini mpi?
@caralarmandradio2 ай бұрын
Hi no you need pscan for that pscan.uk
@silversurfer61732 ай бұрын
@@caralarmandradio does that program new 2 button fobs?