great video ! what is that stand thing you use?

Good job

How often to clean? Every time after shooting?

Great review man, congrats on the tight shots. I bought some of their ammo as well, I’d be interested to see what the 77gr does to a gel block

I have a 1978 marlin 336 bought it in 1998 for $400 at Lus gun shop in Hialeah Florida and i love never will get rid of it. Im a gunsmith and made a custom gunstock for it in a beautiful tiger stripe curly maple with a little ligjt stain and super shiny lacquered finish and now i love it even more. I dont know how to lode it the picture here and if there someone that can explain and show me how i will posted do everyone can see it.

I bought a Marlin 336 CS 30-30 brand new for $199 at Kmart in 1988, still have it , 30-30 ammo back the was just under $10 for a box of 20, the good old day's lol

Thanks for this. Just got the TX22 TORO and I want to clean it before I even take it out. It looks really easy to clean so that's awesome. I bought quite a few different types of ammo for it so I can test different ones out, depending on where I shoot I might clean it after each type each and see which ones are cleaner shooting. All the boxes are 300 or 375 so I'm expecting that'll be enough to spot the differences. Looking forward to it!

Fantastic video thank you

Price..? In inr and dollar

Very thorough and well detailed thank you.

Thank you for another great cleaning video. You've taught me how to take apart and clean a few different guns of mine. Thanks again. Cheers!

Very well explained thanks for the video

Its tolerances. If its too tight any debbris that mKes it in the internals will not shake out. Example : ak47 vs ar15

Its a non issue. If the barrel rattled around in the slide, then it a problem. This is noithing. Thanks

Followed this as I had bought a used Magtech 7022. Literally was the exam same process. Thank god for doing this as it had never been disassembled to be cleaned. Carbonville.

Wearing plastic gloves might be a good idea too. I also try not to use anything in aerosol as I don’t want to breathe any chemicals into my lungs.

I have the reverse issue…

Bullshit. First you said you didn’t want to run the bore brush and such over the threads when you took out the choke tube, but you just did run those through there. You missed some information about removing the piston sleeve. It does not pull out. You need to slow down, and better show the disassembly and reassembly. Now the gun is half way apart and I need to take it to someone.

This is to all the guys that make these Gun videos that I watch all the time why in gods name do you blast crazy rock ‘n roll or blast music in the beginning of videos when we’re all watching 11 12 o’clock at night when our wives are sleeping and we want to buy Guns you’re not making it very easy your intros are too long and too noisy get to the damn point

I paid 80 for mine at a pawn shop it works great holds zero and I was able to still use it with 45 degree angle iron sights and a 45 degree 1x red dot would work great too

About to buy, love your mlk, just wished they sold yours with the alg trigger😊

Awesome video. Thanks

Mine likes the RedOps Russian standard. Steel cased

I have zero intentions on breaking it down this far my method is Brooklyn the mag lock the slide back and run a snake down the boor then go to harbor freight and pick up a assortment package of different sized q tips put a drop or 2 of oil on the cotton swab then proceed to clean up the parts as best as I can making sure I didn’t over due it on the oil and laying it on too thick them I,put a spray or 2 on a microfiber towel of my favorite safari Charlie’s cleaning lubricant and wipe everything that I can get to especially along the metal pieces interior and exterior being careful not to touch anything that could corrode over timekeeping metal or in hi points case pop metal and not to touch it with my bare skin as the oil from our skin will create slight rusting unless you’re into having one of your fingerprints develop into a superficial rusty thumb print visible when you take it out of the case after sitter in your gun cabinet honestly I know it’s better to completely disect it and get to every nook but not always imperative just my .02 happy shooting fellas

10 years🤣 do you even work?🤣

I bought a used 336 CS JM last summer for $400. Unfortunately it's not at all accurate. The barrel looks good. I will have to spend some time with it come spring to see if I can get it shooting right if not it will get traded for something else.

I just bought one of these suckers, and while I'm not new to firing guns, I am to owning, cleaning and maintaining them. This is super helpful. Aside from the 12G cleaning kit, do you have any rec's for buying the other cleaning implements? I'm sure plenty can be found on Amazon, but if I can support someone other than Bezos I'd like to go that route.

Great video… but, I think Beretta freaking put cement on my barrel! I can’t get that damn thing off!!

Can’t get the bolt out, you say to just wiggle and I’ve been wiggling away but it won’t shake out. Any tips or is there a pin I’m missing?, I don’t want to force it Edit: figured it out, anyone struggling with this, make sure your hammer is forward (slowly control hammer and pull trigger)

Has the steel rod and spring created any problems for the frame? I've heard it can blow out the frame.

It's because of the step-down barrel , and the thing that makes it so dam accurate. fits loose, and tightens up down the barrel.

Look up how to take apart PSA dagger. Found this video of someone blabbering for 20 minutes. Less talk more work.

Not too bad. Always been a desktop person of course I haven't used the actual laptop or desktop in ages pretty much use tablets. I just received my Samsung Galaxy Tab a 9 plus from Walmart 149 I got the 64 gigabyte. so far liking it

Nice laptop, Travis

I'm more interested in a product review than seeing how handy some people are at hitting targets.

Hey Travis, which upgrades did you end up doing?

This video is beyond helpful. Thank you for your service.

Your tutorial was spot on. Thank you.

Actually, charter arms was founded in Southport, Ct, and then moved to Bridgeport, Ct. Diceman

Great video, I will be using this for my initial breakdown. Thank you !

I bought a CS when I worked at Walmart around 1990 for $350. I sold it to a friend and have regretted it ever since. I recently got a ‘91 model AW and paid $1k, but I’m pretty sure it’s been a safe queen. The only thing that made it look old was the dust on it. Shoots and cycles flawlessly.

So how's it been holding up? Do you use it a lot? I've been checking this one out in the last couple weeks. Hope all has been good and hope you had a Merry Christmas

I topped mine with a 20 year old Tasco 1.5x 5 wideview (cheap scope) I shoot sub moa with Tula hollowpoint 123 gr. and hornady sst. but I want to go to an Iron sight brush gun, good solid fun !!!

if they were hotter they would work.

TMC Total Metal Case

I'd kill for one of these. Not literally of course. Figure of speech. But I would sell my soul to Beelzebub for one,

It’s 199 now

This ammo is low pressure, no jams in ak's or a vz but it cycles very slow

That is a very old fashion blowback design. I had a couple of 380 blowback fixed barrel pistols that came apart and went together exactly the same way. It is not so easy getting that slide back over and in position

Awesome review!! 😎🤓mines on the way!!!!. And a tucker gun leather holster!