I was looking for an inverter to use rice cooker in my car.. great review!
@Michael-oc5ut5 күн бұрын
Best way to get a old one off in my opinion is to buy the bearing splitter tool. You can get one for 27 dollars heavy duty metal. The splitter was slightly too thick to fit so I grinded a bit of metal off of it. Then heat a couple edges of the bearing....Not the shaft!!!! I hit it with a Big sledge and a small block of wood no damage was done to the cage or bearing saves a lot money and can do one again in the future
@winedineandshinewithchrizt60975 күн бұрын
Hi! I have this camera and it won’t connect
@luiscanchica44106 күн бұрын
can you tell me the wiring colors i disconnected without take a picture
@jeffreypinder93988 күн бұрын
Looked great, just sure about the turkey bacon?
@ChrisDoesWhat7 күн бұрын
We prefer Turkey bacon but can be done with pork as well
@adanafarias6379 күн бұрын
What was the issue of sputter ?
@ChrisDoesWhat8 күн бұрын
Yes it was.
@g2wavy82312 күн бұрын
How do I reconnect the amp
@ChrisDoesWhat12 күн бұрын
This car didn't have the amp.
@g2wavy82312 күн бұрын
@@ChrisDoesWhat the red wire you pointed to fell out in my car and I was wondering how you reattach it
@marcelogartner945014 күн бұрын
Trying to sink your own boat?😂😅😊
@ChrisDoesWhat13 күн бұрын
@marcelogartner9450 ,just have met to comment on another video.
@johnrychcik189223 күн бұрын
Nice!
@SailingGoodBadandUgly23 күн бұрын
Thats awesome! Thats where i lived on my my first sailboat!! Enjoy the journey guys
@ChrisDoesWhat23 күн бұрын
Thank you! We love that area, heading to Caribbean later in the year, we miss your sailing adventures, life on the farm is pretty interesting
@OSRS_Drone24 күн бұрын
Loved watching this. Im replacing my gasket tomorrow. I love the father son content.. my dad loved working on cars and i recently got my YJ.. unfortunately, cancer took him and hes not here for all the projects i have... cherish these memories and make the most of them.
@ChrisDoesWhat24 күн бұрын
@OSRS_Drone hope your gasket change goes well! I'm sorry, it seems like you have great memories with your dad, cherish it. My brother-in-law, who is my age, is struggling with cancer. Life is too short. We have to teach and love our children before we can't. Thank you.
@jamesblair961425 күн бұрын
I dropped a screw off my AFB top, it dropped by the front of the engine, it’s a 383 with no p.s., so it shouldn’t be to hard to find, right? I looked for days, it really bugged me. I found it about 20 years later, it fell through a tiny hole in the top of the K member. I was cleaning the underside of the K member many years later, cleaning road sand and small rocks that had gotten inside the K member, and out came the long lost carburetor screw. I instantly recognized it, and just as quickly put it back where it belonged.
@ChrisDoesWhat25 күн бұрын
@jamesblair9614 lol, so 20 years until the carb screw was replaced? We'll at least you found it. The new cars are the worst, mess my old square body, never lost anything.
@jamesdavis325025 күн бұрын
Very helpful video! Thank you for posting!
@ChrisDoesWhat25 күн бұрын
@@jamesdavis3250 glad it helped.
@SVAcadian26 күн бұрын
those damn crab pots!
@ChrisDoesWhat25 күн бұрын
Hate them. Some are in the ICW, don't think they meant to put them there, but they were.
@tradernick8326 күн бұрын
Once a week alternate letting out 10ft of chain and then the next week bring in 10ft of chain, keeps the growth off the chain.
@ChrisDoesWhat25 күн бұрын
@tradernick83 will have to do that. Right now, we have all the chain out.
@NewYorker-sf8wo27 күн бұрын
Be nice to have a video as to where the thing is located.
@billywalker2128 күн бұрын
"We're in the garage"...😂!
@ChrisDoesWhat28 күн бұрын
@@billywalker21 ?
@reneeredding754Ай бұрын
I sure love you guys. ❤
@ChrisDoesWhatАй бұрын
Love you too!
@johndennis5972Ай бұрын
You forgot the bellows adhesive, also those clips should be at the bottom , they're on there to help keep it from slipping off when the outdrive is tilted all the way up
@ChrisDoesWhatАй бұрын
Thank, we are on a bigger boat now, still have a lot to learn. This repair hasn't failed, this I an old video. You can run the boat without this. This just helps with noise.
@bigbellykingАй бұрын
Hey my brother. I just wanted to comment on your Dana 35 gear swap. I am a mechanic by trade but pass on differential gear changes and setups. I needed new gears for my TJ Wrangler and found your video. *With you losing or missing the middle and end of the work video, you should have NEVER posted it. Any beginner who was trying to get some info on this, would be like WTF? And get discouraged and not even attempt the job. You should take this one down. Just my humble opinion
@carollajeunesse5218Ай бұрын
😊 this video was very interesting. It was like being in automotive shop in high school. Even when it looks like a lot of work, in the end, well done 😅. I’m learning a ton from you and having fun sharing your journey. Please give cruiser a hug.
@ChrisDoesWhatАй бұрын
LOL, I loved auto auto, welding, and shop class! We are learning a ton as well, have to overcome issues all the time, and are learning a ton as well. Cruiser sends hugs as well, still chilling out, not helping out at all. 🤪❤️
@user-bl4hb1bq9tАй бұрын
She asks if it Comes with a dodger & he answers about the sail bag!
@ChrisDoesWhatАй бұрын
My wife was asking the broker in the boat about the Bimini. I was recording things I saw to go back and review this boat later. We did buy this boat.
@user-bl4hb1bq9tАй бұрын
@@ChrisDoesWhat Funny I didn't see a broker!
@ChrisDoesWhatАй бұрын
I keep her off camera. We don't like to put others on camera and ask before we do.
@user-bl4hb1bq9tАй бұрын
@@ChrisDoesWhat Are you that stupid! If I don't see a third person, I think only 2 are there! Lost Sailor!
@ChrisDoesWhatАй бұрын
What's your problem
@Victor-wb1ukАй бұрын
what the hell? why would you flood the engine compartment like that?
@ChrisDoesWhatАй бұрын
Flood the engine compartment? Have you never sprayed an engine down?
@onefixitmanАй бұрын
I know you guys are so happy to be back on the water and enjoying life again.
@ChrisDoesWhatАй бұрын
Definitely, so much cooler, much more to do!
@toddfisher3792Ай бұрын
Hoping this fixes the issue that my pops is having with his 1987 Jeep. Going to install the part in this afternoon. Thanks for the video!
@ChrisDoesWhatАй бұрын
Hope so to guys, wish you the best!
@gerardjones7881Ай бұрын
That radio is NLA . good video anyway.
@ChrisDoesWhatАй бұрын
Thanks for the info
@stevesimone1104Ай бұрын
I won't watch a video that starts with a stupid intro video
@ChrisDoesWhatАй бұрын
Good for you.
@painedinksАй бұрын
I'm already voting for the awesome! I knowtl that stuff kicks major butt in stain removal, I know that you have to rinse it real good though. Another good thing I use awesome for is the sides of your tennis shoes (vans, converse, etc) use it to clean scuffs and stains around white rubber sole along sides, it's literally awesome 😂
@ChrisDoesWhatАй бұрын
It is pretty awesome! Have to get more to clean some things on our boat.
@janmeacham281Ай бұрын
Whow that's awesome!! Friendly neighbors!
@NLTransouJrАй бұрын
Followed instructions, then I had to press program button on back of lift motor. Got back in car to press and it worked. Thanks
@ChrisDoesWhatАй бұрын
You're welcome, glad this video is still helpful!
@epicjamaicanjokes8279Ай бұрын
You really shouldn't turn the crank pully anti clockwise
@ChrisDoesWhatАй бұрын
LOL, sure
@mojarnuggetАй бұрын
On a 85 CJ7 do you think the carb should need to be configured to compensate for the condenser? Thanks
@ChrisDoesWhatАй бұрын
I believe there is a part where you can get to adjust the rpm when you turn on the ac. We didn't have to do this. Our jeep is fuel injected, and the jeep doesn't stall.
@CC-ky6chАй бұрын
Did you find out why the belt melted on pulley?
@ChrisDoesWhatАй бұрын
Yes, we had to replace the pump later.
@aurian18Ай бұрын
So, what was the rattle you were getting? Was it constant or intermittent? Thank you very much.
@ChrisDoesWhatАй бұрын
Thank you for the question. The rattle was constant. It was because of the flywheel always hitting it.
@aurian18Ай бұрын
@@ChrisDoesWhat Thank you!
@garybrady7245Ай бұрын
I can get my Tao Rhino up to about 48mph but still have a couple small things to do. But i dont really want it to go much faster cuz it gets crazy with the death wobbles lol and im about 175-180lbs. But i have put a Nibbi carb on it and a cheap slip on muffler. Would definitely like different tires the ones that came on it are for mud id say because they look like the letter "A" for treads spaced far apart.
@ChrisDoesWhatАй бұрын
Just be careful. The frames are weak on these. When I did this, I was around 260 lbs a year later I had to weld up some frame cracks.
@garybrady7245Ай бұрын
Thanks for the heads up
@StupidEarthlingsАй бұрын
Nice. (Although, drives my ocd the way you 'twisted' the power wire strands 'backwards'..) 😮
@ChrisDoesWhatАй бұрын
Lol, guess I can be backwards at time.
@jamess3532Ай бұрын
I know this is an old video but I have the same boat and was wondering if you can tell me which color wires go where on the switch? My old one is removed so I can't remove and install each wire at a time to get them right.
@ChrisDoesWhatАй бұрын
Sorry I don't, but you can use a multimeter to find your positive negative, and the last should go to your starter solenoid.
@jamess3532Ай бұрын
@@ChrisDoesWhat Thanks, I was able to figure it out. Red goes to the battery, Purple goes to the ignition and the yellow with the strip is for the solenoid. Appreciate you responding.
@rubenvarela4077Ай бұрын
Don't forget to tie the chank bolt
@ChrisDoesWhatАй бұрын
Sure
@LittlePieceOfHeaven.65Ай бұрын
wrong direction 😂 Pro-Tip always start at the highest point -Garage doors and work yourself down
@ChrisDoesWhatАй бұрын
We did
@carollajeunesse5218Ай бұрын
😅It’s nice to see you back up and running. Take one day at a time and enjoy. It was fun seeing your dog being playful and cruiser resting on the shelf.❤
@ChrisDoesWhatАй бұрын
It is great to be back on the water. The new bottom paint allows the boat to cut through the water like a knife through butter. The dog was being a brat that day, and all Cruiser did was smile about it.
@reneeredding754Ай бұрын
Very nice.... always enjoy seeing what you all are doing.
@ChrisDoesWhatАй бұрын
Yes, this wasn't much of a video though. Hope to start recording a bit more, just hard to figure out what we want to share with the world.
@danwicklum8867Ай бұрын
followed your advice.......now works perfectly.....saved me buying a new fridge......samsung rep advised buying a new one!
@ChrisDoesWhatАй бұрын
That's great. We did have to do this a few times. The ice system is the issue.
@carollajeunesse5218Ай бұрын
I’m lost for words. That was a great big project you guys took on. In the end it looks fantastic. Well done. You will be making so many memories. Can’t wait for your next adventure. Say “Hi “ to Cruiser for me ❤❤❤
@ChrisDoesWhatАй бұрын
It was a bigger and harder project than we expected! Can wait to see what we do next either. The weather dictates our lives, and hurricane season is upon us. Cruiser says hi, makes us think of you. Got to tell you, Cruiser is a bit lazy, doesn't lift a wing on any projects.
@kolliP555Ай бұрын
Is it still working after 7 years, or did you get a new battery for the mower? If you got a new battery, what is the life expectancy for the battery that come with lawn mower?
@ChrisDoesWhatАй бұрын
It is, gave it to our son because we live on a sailboat. We have bought 3 new batteries over 7 years.
@DownInTheIslandsАй бұрын
Watching you guys is brining back memories of all the boat work I use to do. I don't miss it at all. I do miss being on the water though.
@ChrisDoesWhatАй бұрын
Lol, we don't mess it as the yard, but the reward is now! Hope you are doing something you love! ❤️
@reneeredding7542 ай бұрын
Good to see you back in the water again.🎉
@ChrisDoesWhat2 ай бұрын
Glad to be back in the water as well!
@onefixitman2 ай бұрын
Great job. It took longer but it will last longer. Still looking forward to the video of your portable generator and how you power up the boat with it.
@ChrisDoesWhat2 ай бұрын
Thank you, we hope it last for a while. Will be doing that soon, don't like to talk about something without putting the time into it first. We now have over 100 hrs on the generator now.
@ABoatNamedCrazy2 ай бұрын
How many gallons of paint did you end up using? Did you have any left over? Enjoying your videos. Keep it up.
@ChrisDoesWhat2 ай бұрын
We used 6 gallons of barrier, 5 gallons of bottom. We still have a gallon of bottom paint left. Thanks for the support, and we have we can continue to entertain you!