what do you think is in there?

Front wheel bushings Wheel Horse part number 100166. Stens and others have them also, different part numbers

That’s what the blend door actuator does! LOL

Do you have to reprogram the module?

I ended up taking the front faceplate off and spraying some deoxit in the micro switches and that seems to have fixed it. I’ve never had a camcorder that would freak out like that, and thought it was too hilarious not to catch it in the act on a video.

I’m having to replace mine because the driver side a/c vents are blowing warm to hot air, and my passenger side a/c vents are blowing cold air…idk if that’s the answer you’re looking for😅

I believe the failed condition is that the drivers side blows out warm/hot air while the passenger side blows out cold air. This is the same exact issue that I am having with my 2014 Sierra.

@@tomcunningham2063 that's my issue or atleast it was. I did the HVAC reset by pulling fuses and it corrected itself at one point but then it messed up again. That then made me wonder if the driver's side dual zone temp sensor was acting up. But i haven't messed with it in a while as I'm using the heat more so now.

@@cwdrake09 Sounds like we have the same issue and tried the same remedies. I too tried the HVAC reset procedure and it worked for a bit, but once I went from cool to heat and then back, it messed up again. The blend door was relatively cheap, it's just looks like a bitch of a job to do. I found another video this morning that is a bit more detailed on how to do it and has more information about the screw sizes and what not. Here is the link to it for reference: kzbin.info/www/bejne/qJyWloR_mrtlbdk

Don’t know if you guys are still having issues… but mine just went out. There’s a KZbin video with a guy in an Escalade explaining how to correct it. I ran the ac full blast for 5 minutes. Then the heat full blast for 5 minutes. Then the ac again for 5 minutes. It’s worked for a few days. I’ll report back if it fails again. Hope this helps.

No disconnect the negative terminal in the battery tho b4 all this

Mode actuator

Description says Garrett gt17

Hi, I will buy a pd170, but what should I pay attention to when buying second hand and if there is no microphone on it, will it take a voice record and which model can I get a fish eye? I would appreciate it if you could let me know.

@@elvirdmr ask the seller to check hours on heads that’s shown in a menu settings. It needs an XLR microphone as no microphone built in. A voice recorder would have headphones output but normally that’s a 3.5mm socket and the pd170 doesn’t have that, only an XLR inputs.

I (coincidentally) just watched your video on your PD150 the other day. I too have a PD150, but it's actually the PAL model, PD150P. I've been surprised how well it gets along with my other video equipment here in the U.S.A. I believe the PD150 does have a fluid coupled lens as well, I think my PD170 just has a small bubble in it's lens and its not a normal thing. Maybe a manufacturing defect or it had a small air leak in the past. I'm leaning towards manufacturing defect, though, as it wouldn't have been easily noticed in normal operation. I've been looking for a DSR-50 for a LONG time now, and they always sell for way more than what I consider their value to be. Took a long time to find the right deal for me. I've also bought about 10 new cameras recently. You've been pretty lucky yourself with some of your acquisitions lately, especially all the video monitors you have. I just went and traded off a couple of my PVM's (Sony 8041Q and Ikegami TM9-1) for a Canon GL1, GL2, Sony VX1000 and DSR-250. I kept my best ones, including my 14" HR model. I'm normally not a fan of making "unboxing" videos, but it gave me some content to upload (which I haven't done in a while) and lately I've been shocked with the really crappy packing jobs sellers have been doing, so I thought there might be some humor value in recording it, plus that gives me some ground to stand on if stuff gets damaged as a result of poor packaging. As a side note - apparently the 2017 version of Windows movie maker does a really crap job of deinterlacing and preserving resolution in standard definition video clips, as the VX2100 produces noticeably clearer and better looking video than what this happens to be. I think I'll be sticking to Vegas Pro 13.