Rotation Nation RC

Пікірлер

@bobbyspenser7304 2 күн бұрын

just oh my god that ride is nice

@mariochesser7849 9 күн бұрын

Do/Did you have slop from the tie-rod area? And what was your fix?

@rotationnationRC 9 күн бұрын

There is a small amount of slop there. The upgraded uprights took some of it out. It’s coming from the balls on the knuckles but it’s so slight. I was able to eliminate the lateral slop on the wheel with a thin shim. Surprised at how little slop the steering has stock.

@MrGonzoify 25 күн бұрын

This transmitter is the first and only one (so far), that I have bought. Until now just used the rtr radio. It seems like a great value, and has more then enough features to keep me busy reading and watching info. Thanks for the video, I am switching my kagama to this set up, and I have already killed a servo in it, so I hope to extend the life of it by taking every precaution possible.

@rotationnationRC 16 күн бұрын

That’s great I was able to help, thank you for watching and the comment

@rc_michi Ай бұрын

Love it ❤

@rotationnationRC Ай бұрын

Thanks for the nice comment! More content will be coming

@stevesocransky6341 2 ай бұрын

Love the trans am! I have several fazers…

@rotationnationRC Ай бұрын

Thank you! I have a new look for that fazer coming to the channel soon. Fazer is an amazing platform high value for not high dollar

@billygoatracer 2 ай бұрын

Ol i did use my 3s ans it does break stuff Also can even drive it, it jus spins Domt forgetvti tape inside he bisy because the rear tires will rub the body amd make the paint come off inside

@rotationnationRC Ай бұрын

My first one was the ford truck but after dialing in thr suspension I cut off some of the grill and sides and the entire tail gate and that was rad

@grandejalapeno2401 2 ай бұрын

Can you put that body on other cars?

@rotationnationRC Ай бұрын

That’s the way to go! Body only on a fazer

@jdotrepreza Ай бұрын

@@rotationnationRC so the 1/10 scale hoonigan body fits on a fazer?

@kennethwilson2409 2 ай бұрын

What size are the stock wheels? The hex size and so forth because I want to get some gold ones. Thanks

@mariochesser7849 3 минут бұрын

12mm hex

@WorkInLight 2 ай бұрын

I recently purchased the Kyosho Fazer Datsun 240Z as it was on sale, it looks fantastic and has more pep than my Tamiya TT-02's, shame they aren't a build kit like Tamiya. I was so impressed with it a few days later I ordered the Datsun 240 R rally version, it arrived a couple of days ago, looks even better and although I haven't run it yet, the videos I've seen show a great looking car that performs also. Kyosho are great value for money, and probably the best looking cars out there, thoroughly recommend them and you should give them a look, their classic Japanese bodies ( and others) are something else, and adding the light kit to them just tops off the package.

@rotationnationRC Ай бұрын

The Fazer is indeed great value for the money, elsewhere on my channel I did a series of hop up videos including ball diffs. I have a couple more fazer videos coming including how I got it to really hook up and a full on retro muscle car look coming too. Thanks for thr comment and I’m going to look up that rally body now

@jokermahem666 2 ай бұрын

Hello....great videos. Questions I have ....are you still using the black medium sway bars front and rear and have you done anything to the shocks ?? Different oil / springs / different shock position from stock ??

@rotationnationRC Ай бұрын

I kept the shock positions stock and went down in size with the spacers and bar size in the rear. I woke the car up. Basically I dialed in thr diffs with the chassis stiff then loosened up the rear and the thing absolutely rips. Video coming about that process I just don’t know when because life has been crazy

@jokermahem666 Ай бұрын

@@rotationnationRC So are you running a black medium front bar and a soft silver rear bar ?

@mariochesser7849 50 минут бұрын

@@rotationnationRC, I would love to see that video!!!

@KeeganParsley 2 ай бұрын

@aqualungs77 3 ай бұрын

Do you think the heat sink is worth it?

@rotationnationRC 3 ай бұрын

They way I drive it yes definitely. The fab and hear sink are necessary

@guillermosimba9418 3 ай бұрын

I want one

@rotationnationRC 3 ай бұрын

I have a couple that I’m trying to figure out how to give away

@Mito125RR 4 ай бұрын

Love the body on that thing 😎🤘

@rotationnationRC 4 ай бұрын

Many thanks!

@THEDUKELOVER 4 ай бұрын

Looking to pick a used one up today hope its great car great car looks fast

@rotationnationRC 4 ай бұрын

I’m located in the bay and have one

@THEDUKELOVER 4 ай бұрын

@@rotationnationRC man i be out in Oroville visting the wifes family but we live in nc

@rotationnationRC 4 ай бұрын

@THEDUKELOVER if you’ve not found one by the time I get back to the shop which will be about 2 weeks let’s get one shipped

@rotationnationRC 3 ай бұрын

@THEDUKELOVER next time!

@pint_size_crawler 4 ай бұрын

I just snag the Losi drag truck for $40 bucks at my local swap meet. Can’t wait to race it!!

@rotationnationRC 4 ай бұрын

That’s a huge score! Congrats

@OrnalGriffith-qp3pw 4 ай бұрын

Thanks Champ!!

@rotationnationRC 4 ай бұрын

Absolutely!! Thank you

@Alxsimracing 4 ай бұрын

Is that with the blue mod?

@rotationnationRC 3 ай бұрын

Yes… I don’t recommend doing the upper a arms. Keep them stock front and rear and they will work with blue towers and braces

@harald_hans 5 ай бұрын

Very cool ... can you please give me a link for the adjustable diffs - did not found anything !? Thank you !

@rotationnationRC 5 ай бұрын

www.amazon.com/dp/B09DPDFDSX/ref=cm_sw_r_as_gl_api_gl_i_JWTHR5JH91T1QXDGZGFF?linkCode=ml2&tag=rotationnatio-20

@oliverthepig4876 5 ай бұрын

bro that looks amazing

@rotationnationRC 5 ай бұрын

Appreciate it.. I had that GPlus slot car as a kid. Glad you like it and watched the video

@nickarchibald08 5 ай бұрын

Get some different shocks i’d say.

@rotationnationRC 5 ай бұрын

Thanks but these shocks are great it was just "user" error but once I figured it out it changed the car big time!

@harald_hans 5 ай бұрын

Very cool video ... 😎 maybe do you have an advise for the diff upgrade - what part-no. does the optional parts have please ? Thank you ...

@rotationnationRC 5 ай бұрын

www.amazon.com/dp/B09DPDFDSX/ref=cm_sw_r_as_gl_api_gl_i_JWTHR5JH91T1QXDGZGFF?linkCode=ml2&tag=rotationnatio-20

@rotationnationRC 5 ай бұрын

Sorry for the delay. Sometimes I miss replies

@harald_hans 5 ай бұрын

@@rotationnationRC no problem - thank you very much ... 🥰

@brc537 6 ай бұрын

Loosen your rear diff and thicken up the front. Softer spring in the rear and stiffer springs in the front. This will help the rear rotate and the front push and make it easier to drive. Also good tires...

@jamesmeredith381 6 ай бұрын

I limited my shocks and I installed the long control arms from a wrecked LOSI buggy set my tires straight up! OMFG That car went down the track so straight and my fastest time ever! I have eliminated the slipper clutch and changed the gearing!

@rotationnationRC 6 ай бұрын

I’m going back to no sauce and will start logging my times. That sounds fun!!

@timvanasen9822 6 ай бұрын

Can the wheelbase be adjusted to 274mm for the 1970 SS Chevelle?

@rotationnationRC 6 ай бұрын

Kyosho does have a Chevelle body. Not sure if they helps you. Is that the one you’re looking at?

@mariochesser7849 29 минут бұрын

I believe you would have to change out the chassis tub.

@JJ-bx7rs 6 ай бұрын

What used tire and wheel??

@rotationnationRC 6 ай бұрын

I believe the link is in the description. If not I’ll add it

@ChezzyDirt 7 ай бұрын

sweet build, I am in the process now of building up a mk2 chassis. di you happen to have the link to the adjustable ball diffs? Bit confusing trying to source that.

@rotationnationRC 7 ай бұрын

I’ll have to dig that out but I will locate jt for you asap

@rotationnationRC 7 ай бұрын

I just updated the description with a link… I learned a lot about tuning the diffs and need to do another video. I tuned the diffs with a over firm shocks and got it as best as it could that way and when I started removing the spring spacers it woke up - big time. My car absolutely rips. Life has kept me away from the computer to edit. It’s coming soon-ish

@ChezzyDirt 7 ай бұрын

@@rotationnationRCall good found it in the manual. Part#: KYOFAW227

@pattyofurniture5674 7 ай бұрын

Great video 👍

@rotationnationRC 7 ай бұрын

Thank you! I have this home project but look forward to get back to creating more vids

@FoxRacingGaming 7 ай бұрын

Love the jack stands, i gotta get some of those for my trx4.

@rotationnationRC 7 ай бұрын

Great addition to scale these things out! Enjoy and thanks

@FoxRacingGaming 7 ай бұрын

@@rotationnationRC Anytime bud! I bought one of those 11$ stands to put them on so you can work on them, but its all wobbly, the rotation isnt the greatest, and my trx4 has the lift kit, so it doesnt sit quite flat on the stand XD. Question though, do you think with a 1 inch lift kit, and 5 inch tires, the stands would be tall enough for the tires to clear the ground? I still have the stock traxxas tires on, but plan to upgrade to 2.2 / 5 inch diameter beadlocks soon. I'd hate to get the stands only for them to be too short.

@rotationnationRC 7 ай бұрын

@FoxRacingGaming those are big tires and sounds like a nice set up. I just measured the stands and they’re 4.25” so if your tires are 5” that puts your axle at 2.5” so I think they’ll work

@owi1kanobii25 8 ай бұрын

How did you get yours to swing out so easily on dry asphalt?

@rotationnationRC 8 ай бұрын

It’s a 18.5 motor and I tuned the radio sensitivity up. The other is tries they are the mildly treaded street ones I have in the videos. Hope this helps!

@SamSung-mz5it 8 ай бұрын

The apex2 needs upgrades out the box like bearings and sway bars but will perform better than the kyosho fazer ever could once fully upgraded.

@rotationnationRC 8 ай бұрын

I upgraded it with bars and it had bearings but it was not even close to stock fazer which is why I prefer the stock fazer as a starting point. Good to hear you’ve had good luck with Apex2

@nynwyr 8 ай бұрын

Nice videos, they have been very helpful with my own Fazer MK2 build. How much have you tightened the differential and how long before the balls begin to deform from migration of grease?

@rotationnationRC 8 ай бұрын

Hello and good to hear these have been helpful. It took me time to get it dialed it and the way I did it was to run too tight of spring spacers front and rear then dial in the diffs. Once you feel you have it under control or close to dial in start removing the spring spacers and you’ll be amazed. I’ve had any deformation but that’s a great point to be aware of

@taurusfilms.5658 8 ай бұрын

Thanks

@jasonharris630 8 ай бұрын

That’s boi’s haulin

@rotationnationRC 8 ай бұрын

🤙🏼⚡️🫰🏼

@jonathanperez2786 8 ай бұрын

I just got this car today and I like everything about yours

@rotationnationRC 8 ай бұрын

It’s a great kit an affordable. I would run it then modify it one step one part at a time. That way you can enjoy the results each time! Which body are you thinking about using?

@Airdownrc 9 ай бұрын

This is awesome!

@rotationnationRC 9 ай бұрын

🤙🏽

@devindame6101 9 ай бұрын

Site link for wheels ?

@rotationnationRC 9 ай бұрын

I’ll post the link here. I thought I put it in the description

@ChezzyDirt 7 ай бұрын

@@rotationnationRC got a link for those foams? not i description..,.thanks

@rotationnationRC 7 ай бұрын

amzn.to/3UguK0L

@rotationnationRC 7 ай бұрын

Found it!

@frankiesrcs8116 6 ай бұрын

Do those wheels have to be glued ?

@DWTWilt 10 ай бұрын

Dang 🎉😂

@travisstamp7428 10 ай бұрын

I did this years ago as a kid, before brushless motors. My friend built a drag car and crashed it into a parking block. I bought his dragworks motor for my lunchbox. I had to tape D batteries behind the front crashbar, to keep the front end down so i could steer😂 I might have to get another one. Thank you for this!