Sick build! Do both rear wheels move or is it a one wheel drive?
@Engineering_Rebel27 күн бұрын
It’s a solid axel which means power is sent to both wheels at all times.
@EymenOzluk-uh3iy2 ай бұрын
I already commented on your shorts video but… Im a real fan of your built, i want to build one for myself but idk which parts im gonna buy, if you can help me a little bit or give some advice that would be great!
@EymenOzluk-uh3iy2 ай бұрын
Im a real fan of your built, i want to build one for myself but idk which parts im gonna buy, if you can help me a little bit or give some advice that would be great!
@Engineering_Rebel2 ай бұрын
I built this a long time ago but the best advice I can give is to get electric metal tubing and weld together a frame. Before this you need a plan as to how big you want your vehicle to be. I say sketch it out on paper. I built a frame and added everything accordingly like steering system, seats, motor, etc…
@jimmypop40012 ай бұрын
Thanks for the video. Helped my understanding alot.
@jackpersales49202 ай бұрын
Is there significant play in the system?
@Engineering_Rebel2 ай бұрын
Not that I remember of. It was extremely accurate and easy to steer in all situations. Much better than a rod setup.
@jackpersales49202 ай бұрын
@@Engineering_RebelThanks for the info
@user-hh8wt1sh6s3 ай бұрын
this really saved me thanks could i get the exact same one just send me the link i would really apriciate that
@Engineering_Rebel3 ай бұрын
It’s on Amazon
@MarkMeadows903 ай бұрын
Looks like it came off a small push mower, due to it being a vertical shaft design. Nice restoration. That must be a newer Briggs engine because of the plastic(?) carb and looks like a nylon camshaft?
@DrD214863 ай бұрын
Very nice
@dazedconfusedSKZ4 ай бұрын
I liked the blue you used - looked good, well done
@carmelitapetersen6154 ай бұрын
When is part 2 coming out
@Engineering_Rebel4 ай бұрын
The rest is on my KZbin you can find it in playlists.
@joseph35204 ай бұрын
Where did you get the steering system
@Engineering_Rebel4 ай бұрын
Amazon I believe
@SylviaNhlapo-fv5es4 ай бұрын
I am vo to do it❤
@miguelrosales15594 ай бұрын
Thanks 🙏 Yuo good 👍
@woodlywhy5 ай бұрын
Just wanna let you know this video is still helpin people like me!
@thercchannel57576 ай бұрын
are the gears metall?
@Engineering_Rebel6 ай бұрын
Yes they are.
@valerieval94716 ай бұрын
wow, great job!
@chazzer6667 ай бұрын
Perfect video. Just what i needed to know
@hakanustundag58578 ай бұрын
❤🎉
@mathiashoppe52409 ай бұрын
hey, how did you build the rear axle?
@Engineering_Rebel9 ай бұрын
Rear axle was bought from Amazon.
@aqmorisny9 ай бұрын
Nice job
@3dprintingpassion5679 ай бұрын
Its crazy how much fun you can have and how much you can learn with a little engine like this
@3dprintingpassion5679 ай бұрын
First video i saw from you and i subscribed because i see a lot of potential
@Krilid1010 ай бұрын
Hey, i want to do this once and i was wondering, where do the parts like brakes and steering rack come from? And is it hard to make one, because i will get help from some people.
@Engineering_Rebel10 ай бұрын
Hey, as I made this GoKart a while back I don’t remember exactly where I got every nut and bolt from. However, most of the parts came from a mixture of Amazon and eBay. Parts can always be retrofitted and make sure to read the description before buying something from eBay as it can be misleading.
@Krilid1010 ай бұрын
@@Engineering_Rebel thank you :)
@payamomidi53311 ай бұрын
Where did you get the steering system?
@Engineering_Rebel11 ай бұрын
Amazon
@themoreyfamily88 Жыл бұрын
Engineering rebel, don’t know if you will have an answer or even answer, but how much did the whole steering mechanism cost?
@Engineering_Rebel Жыл бұрын
Hi, it’s been a while but I believe it was around $105ish on Amazon.
@xXDiver12Xx Жыл бұрын
This video just made me realise that i don't need a differential in the front, thanks.
@3v249 Жыл бұрын
I love small engines
@aviationgeek2624 Жыл бұрын
Quick question how would you adjust this for a slightly larger go kart
@Engineering_Rebel Жыл бұрын
The steering rack can be altered by using the threaded adjusters on either side.
@sidogpmj Жыл бұрын
Your wheel still turn at the same rate tho. You're gonna scrub hard.
@Engineering_Rebel Жыл бұрын
Hi, this is an early video. I had already thought of this and put small metal brackets to stop the wheel turning before the tire scrubs the body.
@adesh2578 Жыл бұрын
Thank you good conten😊
@daveperryLXXVII Жыл бұрын
Trying to find a clutch like this. Can someone help.
@Engineering_Rebel Жыл бұрын
Hi, you can find them on Amazon.
@cookieman0916 Жыл бұрын
Amazon, about $9 for 2 sets
@liamwilliams778210 ай бұрын
Hey mate did you manage to find one the same as I’m having the same issue I ordered 3 different clutches and none of them are the same
@daveperryLXXVII10 ай бұрын
@@liamwilliams7782 no luck dude. I used pieces of my old one and new one. Bits and pieces to make it work
@PrestigeXDragon Жыл бұрын
I got a Wolf Gang Puck pepper grinder as a gift for Christmas and the thing turns on but doesn't turn off. I have to remove the batteries to stop from grinding pepper. Should I A. spend a few hours watching videos on pepper grinder repairs then bust out a lighter to dislodge the components and attempt to fix it? B. toss it in the trash and use the manual pepper grinder? C. order a new one?
@Engineering_Rebel Жыл бұрын
Hello, after reading your comment I’m going to assume that it’s a broken switch. In that case it’s not worth repairing as these salt grinders regardless of brand always have issues. Ours still works to this day after repairs but I honestly would stick with a manual salt grinder instead. Ordering a new one isn’t a bad idea but it will most probably break again. Kitchen appliances, such as electric salt grinders in my opinion are not worth it. This video is just showing how to repair it if it breaks but often times if the repair is too big, it’s not worth it.
@mozellm3814 Жыл бұрын
I Made this after you but different flat engine concept
@rylansrylan Жыл бұрын
Did you make that base?
@Engineering_Rebel Жыл бұрын
Yes I did!
@zainfarsi4334 Жыл бұрын
What is the type of your steering system ?
@Engineering_Rebel Жыл бұрын
Hi, it’s a rack and pinion steering kit that you can find on Amazon.
@zainfarsi4334 Жыл бұрын
@@Engineering_Rebel thank you very much
@zainfarsi4334 Жыл бұрын
@@Engineering_Rebel will it be suitable for mini baja vehicle 300 kg or 350 kg ?
@Engineering_Rebel Жыл бұрын
@@zainfarsi4334 It should work as a rack and pinion rack can take heavier loads.
@fishertech Жыл бұрын
Hey, could you please share what the 2 strap thingies you used to mount the rack and pinion are called? I see pipestraps or u strap clamps.. are those strong enough?
@Engineering_Rebel Жыл бұрын
Those 2 brackets are more than strong enough to hold the rack especially because they’re not made of plastic. I drove the vehicle extensively and there was no slop in the steering. Those U shaped brackets can be found at a Home Depot or ACE hardware store.
@fishertech Жыл бұрын
What is the name of the 2 silver bracket things you used to mount the rack and keep it still
@Engineering_Rebel Жыл бұрын
All the parts used to mount the steering rack were common parts that you can find at a local hardware store.
@jn8218 Жыл бұрын
Would you tell me where can I buy the shim and spacer ? Thanks bro.
@Engineering_Rebel Жыл бұрын
Hi there, I bought almost all of the parts off of Amazon and they arrived within a few days.
@jn8218 Жыл бұрын
Clearly explained !
@khashayar110 Жыл бұрын
Awesome. Thanks. Try to make more informative videos bother. Thanks 👍👍
@khashayar110 Жыл бұрын
Thanks brother. Very informative.👍👍
@ashenafimulugeta5643 Жыл бұрын
Bro you are the real engineer👍
@Omittedbread Жыл бұрын
Love the video man, but could you explain to me how the steering works, from above the rack and pinion, I’m looking to build a vehicle too and wanted to see how the steering worked in yours!
@Engineering_Rebel Жыл бұрын
Thank you for asking! As you turn the steering wheel it pulls the rods on either end due to the gear inside pulling on the rack with teeth. This is why they call it rack and pinion steering. On the end of the steering rod you have a sprocket and as it turns it pulls the rack inside the assembly left or right. This right or left motion causes the rods on either end to pull the wheel inward or outward which causes the wheel to turn at an angle.
@exchangAscribe Жыл бұрын
how much did this cost to make?
@Engineering_Rebel Жыл бұрын
Hi, I don’t quite remember but it was about $500
@exchangAscribe Жыл бұрын
@@Engineering_Rebel ok, just for the frame and parts? (not including engine/battery parts)
@Engineering_Rebel Жыл бұрын
@@exchangAscribe this GoKart uses a pull start so no battery is needed. It was $500 for the entire thing, every part and bolt.
@thqp2 жыл бұрын
Thank you so much for this clear setup!
@3dpoolslandscapedesignsbyr8302 жыл бұрын
Swap it with an electromagnetic brake system by ProStar ..
@tylenol37492 жыл бұрын
how much time did this took?
@Engineering_Rebel2 жыл бұрын
It took me a month to build. I was under time crunch and had to finish it in time to donate it to my Engineering Academy.
@masternone33132 жыл бұрын
Would have tried to have the knuckles further from the frame to have a tighter turning radius
@Engineering_Rebel2 жыл бұрын
Hi thank you for the feedback, this was my first attempt at building a Go Kart so your suggestion is something I will keep in mind for the future. Thank you.
@wiblesgarage20162 жыл бұрын
Awesome video! It’s always fun to tear these little engines down and rebuild them. Keep up the good work.
@Engineering_Rebel2 жыл бұрын
Hi thank you for the kind words, it really makes me happy when others appreciate my hard work.
@juanignacio5732 жыл бұрын
Hi, great video, i have a question, ¿its really needed the spacer?
@Engineering_Rebel2 жыл бұрын
Hi, thank you for tuning in, for the model I have it was needed but it could differ from model to model.
@juanignacio5732 жыл бұрын
@@Engineering_Rebel Perfect, thank you, really apreciate your fast response.