Looking good, man! Let's head back to Uwharrie this fall.
@pierremathonnet9591Күн бұрын
C'est autre chose que les bouses made in USA !
@00nuttКүн бұрын
Man it's gonna make one hell of a beach cruiser too!!!
@GRAPPAHOLICSКүн бұрын
That’s what I’m thinking! We are close to the Outer Banks of NC so it should be good for it
@mr.tomraypaz6085Күн бұрын
I’m glad you were able to save it! Can’t wait to see what you have in store for this project!
@GRAPPAHOLICSКүн бұрын
I really appreciate that! I’m excited about it still.
@mattpburdett2 күн бұрын
Dude, epic save for me today. I build motorcycle race engines, and really nothing should be that tight on them except for journal and head bolts. Went against everything I knew, but wouldn’t ya know it, a little tighter and the 6.7 runs like a champ. Thanks!
@ColtonMCole4 күн бұрын
Get bigger garage
@scottnew867 күн бұрын
Hey bro, what airhammer is that?
@pr763810 күн бұрын
really enjoyed the video, thanks for sharing. impressive base as well.
@GRAPPAHOLICS10 күн бұрын
@@pr7638 Thanks for checking it out!
@rafdecc13 күн бұрын
What's your comment about the 2015 I have a platinum 2015 I'm looking at 164,000 Miles nice truck I really like to get it but tell me a little bit more about you you started going into about the that's the second generation 2015
@GRAPPAHOLICS13 күн бұрын
@@rafdecc 2015 and 2016 6.7 have several improvements over the 11-12 and a better turbo than the 13-14 and I would recommend getting one. I have a 2016 6.7 truck now
@mr.tomraypaz608517 күн бұрын
You got yourself quite a treasure trove there!
@GRAPPAHOLICS17 күн бұрын
@@mr.tomraypaz6085 It’s going to be a fun project for sure!
@mr.tomraypaz608517 күн бұрын
All right! You finally got yourself a shop for your projects! I’ll bet you’re looking forward to finally having a roof over your head while working on said projects. Hopefully you’ll get to stay a while and they won’t have to re-station you anytime soon.
@GRAPPAHOLICS17 күн бұрын
@@mr.tomraypaz6085 Fingers crossed. I appreciate you!
@SethSnowder18 күн бұрын
Watched a ford technicians video first so I could get the steps down correctly and he said “hand tight plus a little” and did that wouldn’t start. Thankyou for your video you saved me a freak out 😂😂😂
@GRAPPAHOLICS17 күн бұрын
@@SethSnowder glad i could help! Please checkout some of my newer videos when you have time.
@ayalajes19 күн бұрын
Thanks. We literally watched a bunched of videos and yours gave us the solution.
@SootyDiesel8120 күн бұрын
No squatting trucks now 😂🤮
@GRAPPAHOLICS20 күн бұрын
@@SootyDiesel81 I’m not sure what you mean?
@SootyDiesel8119 күн бұрын
@@GRAPPAHOLICS Carolina is the home of squatters 8” lifts in the front dumped in the rear
@dw792020 күн бұрын
'What we try to do is not fly near wires..' 🙌
@GRAPPAHOLICS20 күн бұрын
@@dw7920 Glad you got a kick out of that
@Docstantinople20 күн бұрын
This is long time coming man. Congrats on the milestone. Can’t wait to see the rest of the shop get done so you can FINALLY start building the 6.7. Whatever you do, don’t move anytime soon again 😂
@GRAPPAHOLICS20 күн бұрын
@@Docstantinople That’s for sure! Can’t wait to get the two post lift in and start the chassis swap!
@russellc.226120 күн бұрын
for e4od automatic transmission, transfer case, you want to use ford/motorcraft (not other brand) mercon V ATF :) or do whatever but this is the official recommendation
@scottmccook848421 күн бұрын
Looks like u moved from otter run.
@GRAPPAHOLICS21 күн бұрын
@@scottmccook8484 Sure did, but we seriously miss that area! Hope to come back some day.
@scottmccook848421 күн бұрын
@@GRAPPAHOLICS do you remember me ? You took me for a ride in the truck you were building. I was in the jeep an saw you.
@GRAPPAHOLICS21 күн бұрын
@@scottmccook8484 I sure do! Hoping to get back to work on the truck soon. It was nice meeting you.
@rickkoscielniak787321 күн бұрын
I was told the same thing, i got under and tightened it until it stopped, now it starts great but I drove my truck before I retightened it now I have engine light on. but no warning of low fuel pressure now. wonder if a damaged something driving with low fuel pressure
@GRAPPAHOLICS21 күн бұрын
@@rickkoscielniak7873 the code might just need to be cleared or driven until it clears out hopefully
@dennisdelk429821 күн бұрын
Congratulations on your new shop. Its well deserved.
@GRAPPAHOLICS21 күн бұрын
@@dennisdelk4298 I really appreciate that!
@josephchaney515021 күн бұрын
I have a 2011 ford f150 and the passenger side still dings do I do the same for it ?
@00nutt21 күн бұрын
Wait. They didn't cut the topsoil out? Or did I miss that? Because that is the biggest no no in concrete work!
@GRAPPAHOLICS21 күн бұрын
They did not, but we talked over the steps and I feel confident in the results.
@00nutt21 күн бұрын
Maybe your area is different but we always cut the topsoil out because it's organic material and it will shrink and settle under load. I'm in Southwest Louisiana so we are always over engineering our pads.
@christianpowell944721 күн бұрын
So how much was the shop? I didn't catch it if you told us. Looks amazing man. Anxious for you to finish that old school 6.7 merge
@GRAPPAHOLICS21 күн бұрын
@@christianpowell9447 Sorry for the hold up! That will be in part 2 along with the electrical, floor coating and car lift.
@GRAPPAHOLICS21 күн бұрын
@@00nutt I can believe it. I was in Mobile AL for a while and know it’s soft over that way
@PoorBoyGarage23 күн бұрын
Anywhere but Monster transmission 😂
@GRAPPAHOLICS23 күн бұрын
Figured I would give them a try. Didn’t hear anything about them until after I had the trans rebuilt.
@ryanbox547824 күн бұрын
Hey, so I’m working on the 2004 Chevy Silverado 1500. I was trying to use this method but whenever I was on the driver side I noticed that right above that bar that I’m supposed to push up on there is a reservoir tank. Is there any other way to go about this?
@00nutt25 күн бұрын
No way!!! Dude that sucks!!! Glad your alright!!!
@GRAPPAHOLICS25 күн бұрын
Much appreciated! Still runs and drives, stay tuned.
@00nutt25 күн бұрын
@@GRAPPAHOLICS I'll be waiting for the next episode!!!
@GRAPPAHOLICS25 күн бұрын
@@00nutt Much appreciated!
@stevenwooster4098Ай бұрын
Dude we don't give a damn about the dog
@BosBrandonАй бұрын
K3 Nitto Grapplers for tires
@00nuttАй бұрын
Now that's a Unit!!!
@GRAPPAHOLICSАй бұрын
For sure! And I should have several videos on it coming soon. I’m a little behind on my editing
@00nuttАй бұрын
Man don't worry we are still here. Just can't wait to see it come together!!!
@GRAPPAHOLICSАй бұрын
@@00nuttMuch appreciated!
@fishingwithsawyer961329 күн бұрын
Yo, just wondering, did you buy it or is it yours?
@GRAPPAHOLICS29 күн бұрын
@@fishingwithsawyer9613 I bought it during this video which was back around Thanksgiving. This was my first time seeing it
@JohnMurphy-dw6mlАй бұрын
I hope they paid you to remove that piece of shit!
@JohnMurphy-dw6mlАй бұрын
What Marine Corps base is that?
@GRAPPAHOLICSАй бұрын
Cherry Point
@JohnMurphy-dw6mlАй бұрын
That is one ghetto suburban!
@JohnMurphy-dw6mlАй бұрын
What Marine Corps bases that?
@Dieseldap887Ай бұрын
How wide was your stock rim ?
@GRAPPAHOLICSАй бұрын
They are 7.5in wide
@richardmoreno1338Ай бұрын
Thank you Grappaholics great video it helped me out.
@GRAPPAHOLICSАй бұрын
Glad to hear it!
@Truck_personАй бұрын
“Give me 30 grand blah blah blah” your idiot friend is why these trucks at 40 grand on face book
@victortt1912Ай бұрын
Thanks man, did same mistake, fixed with your video
@GRAPPAHOLICSАй бұрын
Glad I could help! Checkout some of my other videos if you get a chance
@larrywalden626Ай бұрын
So where is the video of fixing the knocking noise on this Kawasaki?
@GRAPPAHOLICSАй бұрын
It’s in my shed in the same condition, a new top end didn’t fix it and I bought another 4 wheeler. Hope to sort it out soon
@KimothieАй бұрын
I've been driving a Nissan Titan for the past 15 years and they don't have a seatbelt chime. I just recently got an f250 and its been driving me crazy, so thanks for this video! It worked on the first try!
@bartportingАй бұрын
When you go to bigger tires your truck it doesn’t think you’ve gone as far as you have giving the dash appearance of less fuel mileage
@curtisfuit381Ай бұрын
Issue step come downs but won't go up pull the Fuze rest Fuze the lift then open the door they come down close the door and stay down
@raevenboyce7561Ай бұрын
Do you have a video of taking out the rear seats and center console?
@GRAPPAHOLICSАй бұрын
I sure do, the episode before this one and here’s a link. Thanks for watching kzbin.info/www/bejne/hKCtpYmHhclnl80si=c_h3C1NX5bR6BAQd
@alberttan7873Ай бұрын
Looks nice bro
@Sbc6442 ай бұрын
What offset is that?
@Sbc6442 ай бұрын
Thats off the hook man
@brianflannigans58742 ай бұрын
brimg my truck back spotless or your ass is mine
@deepee96012 ай бұрын
It supposed to do that 😁
@logantoney45252 ай бұрын
How do you keep it from rubbing the radius’s arm? I’m running 37 13.50 don’t touch fenders anywhere but rubs the arms at full lock
@clairebearm67712 ай бұрын
What’s the step bar?
@Pickitout2 ай бұрын
Does the spare tire fit in stock spare tire location? If not what do you do in the event you get a flat tire?
@GRAPPAHOLICS2 ай бұрын
These larger tires, 37s, do not fit in the stock spare location. What I have done is kept a spare at home in case I ever needed it around town I could have my buddy bring it to me. On a trip I have brought it in the bed with a locked bed cover or a cable lock of some sort. Definitely inconvenient but it is also not as common to get a flat with these beefier tires.
@Pickitout2 ай бұрын
@@GRAPPAHOLICS cool thanks for the info
@user-dc8ng2fm3z2 ай бұрын
What life and spacer you running in video
@GRAPPAHOLICS2 ай бұрын
8in BDS adjust up to level it out with 2in shifted industries spacers.