This video just saved me HOURS without having to trace each line. THANK YOU!!
@stever737 күн бұрын
I know this is an old video, but I also had extreme difficulty getting the hot end out- until my incredible wife offered a solution when I was frustrated about the tube not coming out. Wrap some scotch tape around your fingers where you grip the tube (sticky side out). When pushing the ring, the tape gives you the proper grip to pull with enough force to remove the tube relatively easily. Please comment if this comment helps anyone besides me.
@ladytrue10pp13 күн бұрын
Thank you very much I spent about 30 minutes almost an hour trying to figure out how to open this dead burn thing
@cam972814 күн бұрын
So for using a CNC plasma cutter, do I have to do anything else for them to be "cut" lines? Or are they like ready to plug in once highlighted, every video I find has something to do with tracing and I didn't know if you have to do that for plasma cutting
@Homesteading_engineer13 күн бұрын
You probably need to export as a DXF. Create a new sketch, select the face that has the profile you want to plasma cut and then project that face into the sketch. Then export sketch as DXF
@cam972813 күн бұрын
@@Homesteading_engineer I appreciate it for real man, I just got my Eastwood 4x4 plasma table and I’ve played on CAD before just nothing with plasma cutting
@patrickhenry469414 күн бұрын
Really
@bobbleczar19 күн бұрын
thank you for this video!
@micaela2049Ай бұрын
Couple of things: be aware that the mounting of hot end to x carrriage can break. Do not apply force to it, unscrew the hot end from the carriage plate. Also there may be play or a gap from end of tube to nozzle, unscrew a little, feed in tube, re tighten to eliminate gap.
@IndyEGNАй бұрын
I enjoyed this Ted Talk. Thank you!😊
@marthagarcia5570Ай бұрын
Omg thanks my ended has been plugged for a long time already this is the only video that made sense now up and running thank you
@vishalb777Ай бұрын
1:34 mine is not budging, it definitely does not slide out as easy as you show. Any idea why?
@viribeltran092 ай бұрын
Do you have a link for the tube from amazon?
@DrakeyC2 ай бұрын
Thank you so much, this saw was left to me and I spent 15 minutes looking through the manual trying to figure this out
@justifiedbyfaith89712 ай бұрын
Thank you for the simple and straightforward explanation.
@morseapple5562 ай бұрын
wish i found your vid earleir save me a lot of head aches thanks
@albert-karen2 ай бұрын
Thanks, Rob!
@The-Anathema2 ай бұрын
The lower coupling will not depress for me (maybe I need more force, E3 v2 max neo), needed to get some broken filament out because it simply wouldn't feed with just good filament pushing on the end of the snapped piece (it snapped right by the drive gears, worst possible location for a breakage imo, if it breaks further up it's easy to get it out, if it breaks further in it's just not a problem because the filament has nowhere else to go but forward, but right at the drive gears? yeah good luck, it'll just deflect.) but since I could get one side out I could manually push enough through the hotend and now it works just fine.
@thom-lwbz3 ай бұрын
What😂
@Homesteading_engineer3 ай бұрын
Whoops meant to put the 💩 emoji in the title
@demonhogo3 ай бұрын
Thanks!
@Ultimatium193 ай бұрын
Very useful. Thank you very much!
@Shadowpuke4 ай бұрын
awsome vid! mnade it so damn easy for an noob like me!
@brokerchanda-therealestate57635 ай бұрын
how do I do this if some of my image is white?
@jlssculpturedesign81405 ай бұрын
Thank you for the video
@fatboy12715 ай бұрын
🤘🤘
@libSegFault6 ай бұрын
Dont you need to heat up the extruder to replace the tube?
@paolacintron62006 ай бұрын
Thank you so much for this video! My husband setup our printer the first time around so ive been trying to learn how to do it myself and this helped a lot!
@dogfamily31156 ай бұрын
What are you pressing when u just import it in?
@jessycaslow6 ай бұрын
Thanks for the help
@jag84776 ай бұрын
Thank you for this simple, VERY informative video!!!
@SpeedyGwen6 ай бұрын
I can push with the wrench as much as I can, the thingy does NOT depress at all, and I can pull as hard as I want on the tube and it just doesnt get out, I have no idea how u do it...
@prkchpsnaplsaws23227 ай бұрын
This is a cool video - but as a complete beginner it's not showing me everything... I'm replicating exactly what I see you do, but it's not allowing me to select the faces, nor color them... I have no idea what im doing wrong lol
@universe86077 ай бұрын
this video is still helpful after over 4 years, thank you
@mcd4237 ай бұрын
Thank you!!!
@DesignBuildEnjoy7 ай бұрын
so helpful, thanks.
@mgsbrowning8 ай бұрын
1:59 I am trying with all my might to press that coupling down, it will not press down and I cannot for the life of me get that tube out 🤨
@3rdGenGuy8 ай бұрын
thx. but replace your smoke detector battery.
@AndrewSpencer28 ай бұрын
Good instructions on how to use the loft tool, theoretically. Not how you would actually go about designing this part in the sheet metal environment for fabrication.
8 ай бұрын
Great tutorial. One thing missing - how to scale the image to needed dimensions in Fusion. Thanks!
@alvinfariz26268 ай бұрын
well explained, thank you
@thethrottlecracker8 ай бұрын
yet another vid that doesnt cover creating a tool path or post process...... sigh
@bobbouchee14528 ай бұрын
Better yet just take some vice grips set em little bigger than tube push it against the plastic while you pull the tube
@GrahamWhatmough8 ай бұрын
Thanks, and make sure you change your smoke detector battery haha
@maxpettit60919 ай бұрын
I appreciate the video, it looks like mine must be defective because while both solutions look like they worked, mine didn't budge. Will has to order replacements it seems like.
@reggicat9 ай бұрын
There are several type of dxf and svg's to "save as" wem saving yout bitmap. Which option to take when importing into Fusion 360 to burn image onto steel? Tyia
@Karim.A.B9 ай бұрын
Thank you.
@ook9910 ай бұрын
Thank you for the instructions, worked flawlessly to replace my stock bowden tube with capricorn one on CR-10 v2
@bruceogletree799510 ай бұрын
Perfect. I knew what I needed to know quickly. Thanks!
@BambuLabUkraine10 ай бұрын
Very useful! Thank you for this video. It was very helpful!!!
@DA-rf7zj10 ай бұрын
Nice video, but I think they've disabled the combine feature in my version. Doesn't work even on the simplest design. Too bad, looks like it would be nice to use.