How long has it been since you originally built this fountain and it is it still standing intact and working with no leaks
@fixcreateexplore29 күн бұрын
@@gsxripper8418 it is around 2 years old and still holding water well. I lose more water to evaporation and birds drinking out of it. We use it regularly. Thanks for the question.
@waynesellers9929Ай бұрын
WOW... that snare drum banging is annoying!!
@fixcreateexploreАй бұрын
I apologize. 😅 Listening to it today I have to agree! I’ll edit and repost when I get a chance. Thanks
@qasimimasoud2861Ай бұрын
You sound like Joe from family guy 😅😅😅
@TieranniPieranni2 ай бұрын
Thank you
@scottzickefoose52482 ай бұрын
Glad things worked out with the DEF tank for you…!
@fixcreateexplore2 ай бұрын
Unfortunately I ended up selling that truck after the DEF system started costing too much to repair.
@robertramirez50432 ай бұрын
Why you replace your brake booster? Did you start having a raddle sound?
@fixcreateexplore2 ай бұрын
I was losing power steering fluid and found that it was a bad seal within the brake booster. I don’t remember any strange noises. Just the usual sounds power steering makes when fluid is low.
@AdamGidney2 ай бұрын
Did you have to get your brake pedal position sensor recalibrated? It has my brake lights on all the time and I can't get into a shop to have them do it for another week. I wish I knew the cheapest scan tool that would let me do it myself. I don't want to drive with my brake light on constantly looking like a dumb....dumb.
@fixcreateexplore2 ай бұрын
Sorry to hear that. I didn’t have to adjust it at all.
@flip_g6565Күн бұрын
Same exact problem.did you figure out what is wrong?
@lisalisko25104 ай бұрын
Im 5'4 how long and what diameter pvc pipe would i use to make this? Im older now and can no longer skate. Too scared to break something but kids want me to. Dont want to disappoint
@fixcreateexplore4 ай бұрын
The ones I made were 24” tall with 2” PVC. You might want to add another 12” in height for you to use. Thanks for the question. 🙂
@lisalisko25104 ай бұрын
@@fixcreateexplore thank you for the prompt response. And still use 2" diam?
@fixcreateexplore4 ай бұрын
Yes. I think the 2” diameter should work. Just keep in mind if you go taller than 36” I would widen the base another 10-12” on each side.
@thomashansen8715 ай бұрын
Do not tighten the top until the bottom is in position, you can damage the bushing.
@jaredlange6 ай бұрын
your wheel seal is seeping oil
@fixcreateexplore6 ай бұрын
Thanks! I’ll probably do a video on that later.
@jaredlange6 ай бұрын
@@fixcreateexplore please do
@jaredlange6 ай бұрын
@@fixcreateexplore building, repairing, exploring.. not sure who cant get behind that. Just earned my sub, you're way better at editing than i am but i upload raw content on my page if ya get curious. A couple tools in the shop
@fixcreateexplore6 ай бұрын
@@jaredlange You have quite a few videos! I'll check them out. Thanks!
@jaredlange6 ай бұрын
@@fixcreateexplore thats nothing lol I dont post much of what I have. building content for more consitent drops. Keep grinding
@austinshirley19436 ай бұрын
You should fully compress the shock before installing..
@kylelaw72106 ай бұрын
If your shocks don’t come compressed, you can jack up the back of the truck up the right amount so the shocks are the correct length without compressing them.
@robkoepnick55076 ай бұрын
Or you can just compress it by hand and zip tie it to hold it. That's what I do, just did it for the new shocks on my truck.
@damonconnell41936 ай бұрын
Your supposed to charge them before installing most of them are stored on there side in factories
@jencyjordan54676 ай бұрын
Thank you 😊
@iceman34516 ай бұрын
No more bouncing around lol
@pauldiesel45826 ай бұрын
I leave a flat screwdriver in the bottom mount to act as a spacer to align the bolt or to pry up the shock if it is out of alignment to install the bolt.
@fixcreateexplore6 ай бұрын
Great idea!
@muttsnuts58496 ай бұрын
Obviously not in a state that uses salt
@fixcreateexplore6 ай бұрын
Currently in a desert but the previous owner lived in northern Canada. It’s got a little rust.
@bobadingo6 ай бұрын
And if those were Monroe Shocks you ain't going to like the results.. .
@fixcreateexplore6 ай бұрын
So far they suit my needs but I will only have the truck another year or two. 😅
@CCconstruction896 ай бұрын
Either have leaking axle seal or caliper/drum, or if you may have just bled brakes. Either way just a heads up in case.
@fixcreateexplore6 ай бұрын
Thanks! I’ll take a look.
@dennisg.33646 ай бұрын
And a dealership will say it's a 4 hour job at $150 an hour 😂
@foojub69076 ай бұрын
Nah, an hour with twice msrp parts
@user-ju2qq2gw4t6 ай бұрын
You sound like Joe from Family guy
@fixcreateexplore6 ай бұрын
I haven’t heard that before but thanks! I guess… 🙂😅🤣
@kevindunn1756 ай бұрын
Holy moly doughnut shop! 😂😂 he does the pace the tone the voice everything! You sir win in the comment section! 🏆
@dingledan13326 ай бұрын
Thanks for the info🙂
@fixcreateexplore6 ай бұрын
No problem!
@sqike001ton6 ай бұрын
Yea maybe in the south in New England your probably going to need a torch on anything older than 5 years
@kevindunn1756 ай бұрын
5 years? You mean 5 days 😂
@foojub69076 ай бұрын
It’s a shock bolt, even in the rust belt those are hardly ever problematic
@catsaregovernmentspies6 ай бұрын
@@foojub6907 What? Surely you jest. 🤡
@jaredlange6 ай бұрын
@@foojub6907 word... The only ones I usually have trouble with are the ones that come lock tighted in. Cradle spindle type, usually Furds lol When you need to grab a 3/4" impact gun to knock em loose you know they were in there good
@pistolmike7916 ай бұрын
Yeah my uppers bolt into the frame and I broke em both. So I gave to weld new mounts. No bueno lol
@fixcreateexplore6 ай бұрын
Previous owner of my truck lived in a cold place where they salted roads so I was surprised mine came off easily!
@pistolmike7916 ай бұрын
@@fixcreateexplore lol I'm in the rust belt. Buffalo new york. And its a 99 grand Cherokee limited
@fixcreateexplore6 ай бұрын
@@pistolmike791 sounds like you’ll need some creative welding!
@backwoodstherapy6 ай бұрын
Same on my jeep. I replaced my shocks with longer ones because I lifted it but I do live in the South and the vehicle is only 2 years old so easy peasy.
@pistolmike7916 ай бұрын
@@backwoodstherapy I wish
@Broke_Honkey7 ай бұрын
Man I’m so glad you learned how to put that clip on really easy and then decided to not show how to do it at all 🙄 what a waste of time
@fixcreateexplore7 ай бұрын
If you read the video description it has a link to the video I used to do it. Pretty straightforward. Enjoy!
@dumbunny88288 ай бұрын
What was the cost?
@fixcreateexplore8 ай бұрын
I believe it was around $70 for everything. Should be able to sell locally once they don’t need it anymore. 😀
@jcalem148 ай бұрын
Hello. Amazing video but where did you get all the parts? Can you shot me a link. I tried with to many differents and didn't fit. Thank you
@fixcreateexplore8 ай бұрын
Hello and thanks for your kind words! It’s been a while but I believe I purchased the side bars from a website called Realtruck.com. The website iarmorauto.com has a lot of support for their iarmor products but I don’t believe they sell directly from their site. Hope that helps.
@ManuelRamirez-us7yg9 ай бұрын
Where did you order that caster bottoms
@fixcreateexplore9 ай бұрын
I got them off formufit.com. Thanks for the question.
@sebastiancervantes680911 ай бұрын
I have so much mold under my cabinets and i wawent sure what to do i took out the base that was falling apart and got to the floor now i dont know what to do im glad i found this thank you
@fixcreateexplore11 ай бұрын
I love hearing that it helped someone! Thank you
@maggiemojica105711 ай бұрын
I have a stone water feature that is stored to go on the wall but it's way too heavy. Can you give me ideas on how I can set it up?
@fixcreateexplore11 ай бұрын
Hello Maggie. Without knowing the specifics of your water feature, I can only offer some suggestions. If installation instructions were not included try googling the make or model for more info. Usually these features have some type of mounts on the back to hang on lag bolts that are drilled into studs. The heavier ones could also require an extra support shelf to sit on. I know it’s not much but I hope it helps. You got this! 😁
@maggiemojica105711 ай бұрын
@@fixcreateexplore Thank you
@ElizabethCogerNorcliffe Жыл бұрын
i wanna clean my eyes out with bleach
@fixcreateexplore Жыл бұрын
Yeah… I had a front row seat! 😅😂
@borisgarcia817 Жыл бұрын
You are genius … i which I could be your student to make those things
@fixcreateexplore Жыл бұрын
Thanks for such kind words! 😊
@krayzyr1 Жыл бұрын
Is it water proof? I’m building a fountain in my back yard and don’t know what to use
@fixcreateexplore Жыл бұрын
It leaks water slowly into the surrounding planter so I have to top it off every 3-4 days in the summer. I believe I lose some to evaporation and wildlife as well since temperatures are sitting around 100-110F. The stone of the fountain itself also soaks in some of the water. I’ve been happy with topping it off occasionally and I feel like the only thing I could have done to make it more leak resistant is to apply something similar to what they use in pools. Hope that helps with your build. 😁
@robertlivingston360 Жыл бұрын
Did you take note of the electrolytic polarity markings? I had several inverter generators, different brand but probably from the same factory, that each failed with similar symptoms right at the 20 hour mark. They were warranty replacements so I never found the exact cause but speculated that a reversed capacitor in the CDI would start to fail at about this time frame
@fixcreateexplore Жыл бұрын
Unfortunately I didn’t pay attention to that. It would be interesting to know if that was the cause. Thanks for the question!
@lavitilnacruel Жыл бұрын
Hello! Can you share the name of the pump purchased here in mexico? It´s still working? Thank you very much! Its really nice your fountain
@fixcreateexplore Жыл бұрын
Hello. So I bought the fountain stone pieces in Imuris, Sonora, Mexico. The pump was purchased in Arizona at one of the big DIY stores. It is a smartpond 420-GPH Submersible Pond Pump. It has been doing well and is easy to take apart and clean any debris that gets in. Thanks for the question!
@ImTheBhattman Жыл бұрын
Is there a reason you don’t caulk the edges after?
@fixcreateexplore Жыл бұрын
It’s an option you should consider if you get a lot of moisture under your sink. Moisture is not a problem in southern Arizona so I haven’t seen caulking used under sink cabinets here. Thanks for the question.
@ImTheBhattman Жыл бұрын
@@fixcreateexplore Gotcha, thanks! I was debating redoing my water damage by placing a piece of plywood and then peel and stick vinyl on top of it to waterproof it going forward (with caulking). I would rather not have to replace the wood again down the line.
@fixcreateexplore Жыл бұрын
Sounds like you have a great plan! Hope it all goes smoothly!
@gilbertianrueda Жыл бұрын
What mortar did you use to glue all the pieces together?
@fixcreateexplore Жыл бұрын
It was Amerimix preblended mortar type S
@Rhrswag Жыл бұрын
Great video! So happy to hear you are enjoying the rack. If you have any questions or concerns at anytime, please do not hesitate to let us know!
@fixcreateexplore Жыл бұрын
Thanks!
@rogersinks95572 жыл бұрын
Great information
@marssinks82322 жыл бұрын
You did a fantastic job with that wall!!!
@fixcreateexplore2 жыл бұрын
Thank you!! 😘
@iboardauto30942 жыл бұрын
Amazing installation well-done ! It looks awesome on your truck!
@fixcreateexplore2 жыл бұрын
Thank you! I am very happy with them.
@marssinks82323 жыл бұрын
I love this!
@CWY32133 жыл бұрын
Alright so I will give the feedback as a guy who essentially only watches KZbin. You can ask K. It’s all I watch. So first your voice is excellent. Calm and confident I like it. Two I like the comments on the screen. They are funny and make it personal. As the negative goes. Do one orientation on the camera. When it cuts off on the side and does black is really noticeable after having a wide screen. Two tell us what you like and don’t like. I am not sure what you are going for with the channel but telling us what you like about the color texture and durability would be awesome. And I know you covered it briefly at the end but I think some more would be awesome!
@DesertNative23 жыл бұрын
Thanks Caleb for your straight forward review! I realized my mistake with screen orientation halfway through filming and tried to edit it out with adobe rush. Unfortunately, after my first upload to KZbin I found that some of the focus areas were out of frame so I just used the original format on the current video. I will keep that in mind next time I use my camera phone for video! I will also work on giving more feedback about the parts or products I present in the videos. Thanks for checking out the channel!